Finite Element Simulation of Shielding/Intensification Effects of Primary Inclusion Clusters in High Strength Steels Under Fatigue Loading
Source abstract
Abstract
The change of potency to nucleate cracks in high cycle fatigue (HCF) at a primary nonmetallic inclusion in a martensitic gear steel due to the existence of a neighboring inclusion is computationally investigated using two-and three-dimensional elastoplastic finite element (FE) analyses. Fatigue indicator parameters (FIPs) are computed in the proximity of the inclusion and used to compare crack nucleation potency of various scenarios. The nonlocal average value of the maximum plastic shear strain amplitude is used in computing the FIP. Idealized spherical (cylindrical in 2D) inclusions with homogeneous linear elastic isotropic material properties are considered to be partially debonded, the worst case scenario for HCF crack nucleation as experimentally observed for similar systems (Furuya et al., 2004, “Inclusion-Controlled Fatigue Properties of 1800 Mpa-Class Spring Steels,” Metall. Mater. Trans. A, 35A(12), pp. 3737–3744; Harkegard, 1974, “Experimental Study of the Influence of Inclusions on the Fatigue Properties of Steel,” Eng. Fract. Mech., 6(4), pp. 795–805; Lankford and Kusenberger, 1973, “Initiation of Fatigue Cracks in 4340 Steel,” Metall. Mater. Trans. A, 4(2), pp. 553–559; Laz and Hillberry, 1998, “Fatigue Life Prediction From Inclusion Initiated Cracks,” Int. J. Fatigue, 20(4), pp. 263–270). Inclusion-matrix interfaces are simulated using a frictionless contact penalty algorithm. The fully martensitic steel matrix is modeled as elastic-plastic with pure nonlinear kinematic hardening expressed in a hardening minus dynamic recovery format. FE simulations suggest significant intensification of plastic shear deformation and hence higher FIPs when the inclusion pair is aligned perpendicular to the uniaxial stress direction. Relative to the reference case with no neighboring inclusion, FIPs decrease considerably when the inclusion pair aligns with the applied loading direction. These findings shed light on the anisotropic HCF response of alloys with primary inclusions arranged in clusters by virtue of the fracture of a larger inclusion during deformation processing. Materials design methodologies may also benefit from such cost-efficient parametric studies that explore the relative influence of microstructure attributes on the HCF properties and suggest strategies for improving HCF resistance of alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
SNC-Lavalin Inc., Toronto, ON M9C 5K1, Canada e-mail:
QuesTek Innovations LLC, Evanston, IL 60201
George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332;
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332
Department of Materials Science and Engineering, Robert R. McCormick School of Engineering and Applied Science, Northwestern University, Evanston, IL 60208;
References (51)
Show source-provided references
1. 3D Modeling of Subsurface Fatigue Crack Nucleation Potency of Primary Inclusions in Heat Treated and Shot Peened Martensitic Gear Steels10.1016/j.ijfatigue.2008.12.001 ↗
2. Mughrabi, H., 2002, “Fatigue Crack Initiation Mechanisms and Fatigue Life in High-Cycle and in Ultrahigh-Cycle Fatigue,” Fatigue; David L. Davidson Symposium, Seattle, WA, February 17–21, pp. 3–15.
3. Specific Features and Mechanisms of Fatigue in the Ultrahigh-Cycle Regime10.1016/j.ijfatigue.2005.05.018 ↗
4. Effect of Inclusion on Subsurface Crack Initiation and Gigacycle Fatigue Strength10.1016/S0142-1123(02)00037-3 ↗
5. Inclusion-Controlled Fatigue Properties of 1800 MPA-Class Spring Steels
6. Experimental Study of the Influence of Inclusions on the Fatigue Properties of Steel10.1016/0013-7944(74)90073-3 ↗
7. Tiemens, B. L., 2006, “Performance Optimization and Computational Design of Ultra-High Strength Gear Steels,” Ph.D. thesis, Department of Materials Science and Engineering, Northwestern University, Evanston, IL.
8. Fatigue Life Prediction From Inclusion Initiated Cracks10.1016/S0142-1123(97)00136-9 ↗
9. Initiation of Fatigue Cracks in 4340 Steel10.1007/BF02648709 ↗
10. The Early Stage of Fatigue Crack Growth in Martensitic Steel10.1007/BF00053515 ↗
11. A Finite Element Study of Short Cracks With Different Inclusion Types Under Rolling Contact Fatigue Load10.1016/S0142-1123(96)00045-X ↗
12. Inclusion-Matrix Debonding and Fatigue Crack Initiation in Low Alloy Steel10.1007/BF00036019 ↗
13. Initiation and Early Growth of Fatigue Cracks in High Strength Steel10.1016/0013-7944(77)90074-1 ↗
14. Fatigue Fracture of Low Alloy Steel at Ultra-High-Cycle Region Under Elevated Temperature Condition10.2472/jsms.46.1396 ↗
15. Recent Evaluation Procedures of Nonmetallic Inclusions in Bearing Steels. Statistics of Extreme Value Method and Development of Higher Frequency Ultrasonic Testing Method
16. On `Multi-Stage' Fatigue Life Diagrams and the Relevant Life-Controlling Mechanisms in Ultrahigh-Cycle Fatigue
17. Stepwise S-N Curve and Fish-Eye Failure in Gigacycle Fatigue10.1046/j.1460-2695.1999.00206.x ↗
18. Fatigue Fracture Behavior of High-Strength Steel in Super Long Life Range10.1299/jsmea.45.517 ↗
19. 1988
20. Methods for Estimating the Sizes of Large Inclusions in Clean Steels10.1016/j.actamat.2005.01.035 ↗
21. Statistical Distributions for the Size of Fatigue-Initiating Defects in Al-7%Si-0.3%Mg Alloy Castings: A Comparative Study
22. Piezoelectric Fatigue Testing Machines and Devices10.1016/j.ijfatigue.2005.09.020 ↗
23. Development of Ultrasonic Fatigue for Rapid, High Temperature Fatigue Studies in Turbine Engine Materials
24. 2005 · 1193
25. Simulation-Based Strategies for Microstructure-Sensitive Fatigue Modeling
26. Microstructure-Based Fatigue Modeling of Cast A356-T6 Alloy10.1016/S0013-7944(02)00021-8 ↗
27. Concurrent Design of Hierarchical Materials and Structures
28. The Role of Vacant Lattice Sites in the Low-Amplitude Fatigue Failure at Inclusions in Steel10.1016/0001-6160(82)90020-7 ↗
29. Quantitative Evaluation of Effects of Non-Metallic Inclusions on Fatigue Strength of High Strength Steels. I: Basic Fatigue Mechanism and Evaluation of Correlation Between the Fatigue Fracture Stress and the Size and Location of Non-Metallic Inclusions10.1016/0142-1123(89)90054-6 ↗
30. Subsurface Crack Initiation and Propagation Mechanism in High-Strength Steel in a Very High Cycle Fatigue Regime10.1016/j.ijfatigue.2005.08.015 ↗
31. Effect of Multi-Flat Inclusions on Stress Intensity Factor of a Semi-Infinite Crack10.1016/0013-7944(94)90217-8 ↗
32. The Interaction of a Curved Crack With a Circular Elastic Inclusion10.1023/A:1007663913279 ↗
33. Enhancement/Shielding Effects of Inclusion on Arbitrarily Located Cracks10.1016/0013-7944(93)90236-L ↗
34. Effect of a Flat Inclusion on Stress Intensity Factor of a Semi-Infinite Crack10.1016/0167-8442(93)90020-C ↗
35. 2006
36. 1990
37. Modeling Effects of Compliant Coatings on HCF Resistance of Primary Inclusions in High Strength Steels
38. Characterization of S-N Curve in Gigacycle Fatigue
39. Multiaxial Fatigue Life Predictions Under the Influence of Mean-Stresses10.1115/1.3226066 ↗
40. Critical Plane Approach to Multiaxial Fatigue Damage Including Out-of-Phase Loading10.1111/j.1460-2695.1988.tb01169.x ↗
41. Combined-Stress Fatigue Strength of 76s-T61 Aluminum Alloy With Superimposed Mean Stresses and Corrections for Yielding
42. Fatigue of Metals Under Combinations of Stresses
43. Problems in Fracture of Metals10.1063/1.1707697 ↗
44. A Theory of the Fracture of Metals10.1080/00018735700101406 ↗
45. Cyclic Plasticity at Pores and Inclusions in Cast Al-Si Alloys10.1016/S0013-7944(02)00097-8 ↗
46. Finite Element Analysis of the Stress Distributions Near Damaged Si Particle Clusters in Cast Al-Si Alloys10.1016/S0167-6636(00)00003-X ↗
47. Bulk Deformation Fatigue Damage Models10.1016/0025-5416(88)90546-0 ↗
48. Fatigue at High Temperature—Prediction and Interpretation
49. Multi-Stage Nature of Fatigue: A Review10.1179/msc.1977.11.2.68 ↗
50. 2010
51. Salajegheh, N., 2011, “Microstructure-Sensitive Weighted Probability Approach for Modeling Surface to Bulk Transition of High Cycle Fatigue Failures Dominated by Primary Inclusions,” Ph.D. thesis, Department of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.