Effect of Underloads on Plasticity-Induced Crack Closure: A Numerical Analysis
Source abstract
Abstract
The effect of underloads is mostly quantified by the averaged effect on the fatigue crack growth rate, and the transient behavior is rarely investigated. The objective of this paper is to study the mechanisms behind the effect of underloads, periodic underloads, and underloads combined with overloads. A single underload smashes the material around the crack tip, producing a depression on crack flank and a local reduction of contact forces at the minimum load. The reduction of plastic elongation behind the crack tip has an immediate effect on crack opening level, which rapidly disappears with crack propagation. The smashing associated with the compressive force occurs mainly behind the crack tip position where the underload was applied. The effect of the underload is intimately linked to reversed plastic deformation, which explains its enhanced effect for kinematic hardening. The decrease of load below the minimum baseline load is the main loading parameter. The application of periodic underloads extends the effect of a single underload. The effect of the underload is enhanced by the presence of obstacles in the form of residual plastic deformation, which explains the great effect of underloads applied after overloads.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CEMMPRE, Department of Mechanical Engineering, University of Coimbra Rua Luís Reis Santos, Pinhal de Marrocos, 3030-788 Coimbra, Portugal e-mail:
CEMMPRE, Department of Mechanical Engineering, Polytechnic Institute of Coimbra, 3030-129 Coimbra, Portugal e-mail:
Funding
Fundação para a Ciência e a Tecnologia
References (51)
Show source-provided references
1. Fatigue Crack Acceleration Effects During Tensile Underloads in 7010 and 8090 Aluminum Alloys10.1016/j.ijfatigue.2006.02.048 ↗
2. Fatigue Crack Growth Due to Periodic Underloads and Overloads10.1016/0001-6160(85)90244-5 ↗
3. Fatigue Crack Propagation in 2090 Aluminum–Lithium Alloy: Effect of Compression Overload Cycles10.1115/1.3225939 ↗
4. Fatigue of Cast Aluminum Alloys Under Constant and Variable Amplitude Loading10.1016/0142-1123(95)00073-9 ↗
5. Romeiro · 2005 · 453
6. Fatigue Crack Propagation After Overloading and Underloading at Negative Stress Ratios10.1016/j.ijfatigue.2007.03.012 ↗
7. On the Effect of Stress Intensity Factor in Evaluating the Fatigue Crack Growth Rate of Aluminum Alloy Under the Influence of Compressive Stress Cycles10.1016/j.ijfatigue.2012.01.020 ↗
8. On the Role of Compression Overloads in Influencing Crack Closure and the Threshold Condition for Fatigue Crack Growth in 7150 Aluminum Alloy10.1016/0013-7944(85)90157-2 ↗
9. Effects of Gas Turbine Engine Load Spectrum Variables on Crack Propagation
10. Effects of Compressive Load Excursions on Fatigue Crack Growth10.1016/0142-1123(94)90104-X ↗
11. The Effects of Overloads on Threshold and Crack Closure10.1016/0142-1123(94)90104-X ↗
12. Zitounis, V. , “Fatigue Crack Growth Rates Under Variable Amplitude Load Spectra Containing Tensile Underloads,” Ph.D. thesis, Cranfield University, England, 2004.
13. Numerical Simulation of Fatigue Crack Growth Under Complex Loading Sequences10.1016/0013-7944(92)90221-Y ↗
14. Numerical Modeling of Fatigue Crack Propagation Based on the Theory of Critical Distances: Effects of Overloads and Underloads10.1016/j.engfracmech.2014.07.006 ↗
15. Fatigue Crack Propagation Mechanisms in an Aluminum–Lithium Alloy10.1016/0956-7151(94)00301-W ↗
16. Effects of Surface Deformation and Crack Closure on Fatigue Crack Propagation After Overloading and Underloading10.1016/j.ijfatigue.2004.03.017 ↗
17. Prediction and Simulation of Fatigue Crack Growth Under Conditions of Low Closure
18. Fatigue Crack Growth Behaviour of a Peak-Aged Al-2.56Li00.092 Alloy
19. An Alternative Presentation of the Effects of the Stress-Ratio on the Fatigue Threshold10.1016/0013-7944(89)90193-8 ↗
20. An Inelastic Multiple Discrete Asperities Model for the Effects of Compressive Underloads in Fatigue Crack Growth10.1007/BF00034134 ↗
21. Prediction of Fatigue Crack Growth Under Complex Loading Cycles10.1016/0142-1123(94)90452-9 ↗
22. Load Interaction Effects During Fatigue Crack Growth Under Variable Amplitude Loading—A Literature Review, Part I: Empirical Trends10.1046/j.1460-2695.1998.00083.x ↗
23. Effect of Underloads or Overloads in Fatigue Crack Growth by Crack-Tip Blunting10.1016/j.engfracmech.2005.10.009 ↗
24. Observations of Crack Path Changes Caused by Periodic Underloads in AA7050-T745110.1016/j.ijfatigue.2007.08.021 ↗
25. Effect of LCF on HCF Crack Growth of Ti-1710.1016/j.ijfatigue.2005.07.032 ↗
26. The Effect of Compressive Underloads and Tensile Overloads on Fatigue Damage Accumulation in SAE 1045 Steel10.1016/0142-1123(90)90097-X ↗
27. Accelerated Fatigue Crack Growth in 6082 T651 Aluminum Alloy Subjected to Periodic Underloads10.1016/j.proeng.2013.12.086 ↗
28. Study of Underload Effects on the Delay Induced by an Overload in Fatigue Crack Propagation10.1016/j.ijfatigue.2007.02.002 ↗
29. Experimental Measurement of Crack Opening and Closure Loads for 6082-T6 Aluminum Subjected to Periodic Single and Block Overloads and Underloads10.1016/j.ijfatigue.2012.07.010 ↗
30. A Theory of the Yielding and Plastic Flow of Anisotropic Metals10.1098/rspa.1948.0045 ↗
31. Material Parameters Identification: Gradient-Based, Genetic and Hybrid Optimization Algorithms10.1016/j.commatsci.2008.03.028 ↗
32. A Numerical Analysis of the Mechanisms Behind Plasticity Induced Crack Closure: Application to Variable Amplitude Loadings10.1016/j.ijfatigue.2015.12.006 ↗
33. Numerical Study of Contact Forces for Crack Closure Analysis10.1016/j.ijsolstr.2013.12.026 ↗
34. Three-Dimensional Numerical Simulation of the Deep-Drawing Process Using Solid Finite Elements10.1016/S0924-0136(99)00345-3 ↗
35. Numerical Simulation of Plasticity Induced Crack Closure: Identification and Discussion of Parameters10.1016/j.engfracmech.2007.12.009 ↗
36. Changes in Crack-Opening Stress After Underloads and Overloads in 2024–T351 Aluminum Alloy10.1016/0142-1123(95)00010-Q ↗
37. Reconsiderations of Fatigue Crack Growth at Negative Stress Ratios: Finite Element Analyses10.1016/j.engfracmech.2015.07.022 ↗
38. A Parameter for Quantitative Analysis of Plasticity Induced Crack Closure10.1016/j.ijfatigue.2013.08.026 ↗
39. Effect of Compressive Loads on Plasticity Induced Crack Closure10.1016/j.tafmec.2015.09.001 ↗
40. Empirical Model for Plasticity Induced Crack Closure Based on Maximum and Total Range of Stress Intensity Factor10.1111/ffe.12298 ↗
41. Effect of Short Crack on Closure Behaviour in a 304L Stainless Steel
42. Finite Element Modelling and Analysis of Crack Shape Evolution in Mode-I Fatigue Middle Cracked Tension Specimens10.1016/j.engfracmech.2007.12.012 ↗
43. Transient Behaviour in the Numerical Analysis of Plasticity Induced Crack Closure10.1111/ffe.12134 ↗
44. Fatigue Crack Paths in AA2024-T3 When Loaded With Constant Amplitude and Simple Underload Spectra10.1016/j.engfracmech.2010.03.030 ↗
45. Influence of Compressive Cyclic Loading on Crack Propagation in AM60B Magnesium Alloy Under Random and Constant Amplitude Cyclic Loadings10.1016/j.engfracmech.2013.01.016 ↗
46. Load Interaction Effects on Fatigue Crack Propagation in 2024-T3 Aluminum Alloy10.1016/0013-7944(76)90039-4 ↗
47. Crack Closure and Crack Propagation Rates in 7050 Aluminum10.1016/0013-7944(81)90108-9 ↗
48. Fatigue Crack Closure Measurements on 2024-T3 Sheet Specimens10.1111/j.1460-2695.1995.tb00916.x ↗
49. Experimental and Analytical Investigation of Fatigue Characteristics of 350WT Steel Under Constant and Variable Amplitude Loading10.1016/S0951-8339(02)00004-7 ↗
50. On the Development of Crack Closure With Crack Advance in a Ferritic Steel10.1016/0036-9748(84)90367-3 ↗
51. Characterization of Threshold Stress Intensity as a Function of Near-Tip Residual Stress: Theory, Experiment, and Applications10.1520/MPC20140037 ↗