journal article·2019-10-01

The Precise Determination of the Johnson–Cook Material and Damage Model Parameters and Mechanical Properties of an Aluminum 7068-T651 Alloy

B. Bal, K. K. Karaveli, B. Cetin, B. Gumus

Publisher page

Abstract

Al 7068-T651 alloy is one of the recently developed materials used mostly in the defense industry due to its high strength, toughness, and low weight compared to steels. The aim of this study is to identify the Johnson–Cook (J–C) material model parameters, the accurate Johnson–Cook (J–C) damage parameters, D1, D2, and D3 of the Al 7068-T651 alloy for finite element analysis-based simulation techniques, together with other damage parameters, D4 and D5. In order to determine D1, D2, and D3, tensile tests were conducted on notched and smooth specimens at medium strain rate, 100 s−1, and tests were repeated seven times to ensure the consistency of the results both in the rolling direction and perpendicular to the rolling direction. To determine D4 and D5 further, tensile tests were conducted on specimens at high strain rate (102 s−1) and temperature (300 °C) by means of the Gleeble thermal–mechanical physical simulation system. The final areas of fractured specimens were calculated through optical microscopy. The effects of stress triaxiality factor, rolling direction, strain rate, and temperature on the mechanical properties of the Al 7068-T651 alloy were also investigated. Damage parameters were calculated via the Levenberg–Marquardt optimization method. From all the aforementioned experimental work, J–C material model parameters were determined. In this article, J–C damage model constants, based on maximum and minimum equivalent strain values, were also reported which can be utilized for the simulation of different applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Abdullah Gül University, 38080 Kayseri, Turkey e-mail:

FNSS Defense Systems Co., Inc., Golbasi, 06830 Ankara, Turkey e-mail:

ASELSAN A.Ş., 06370 Ankara, Turkey e-mail:

References (41)

Show source-provided references
1. Light Weight Materials for Automotive Applications10.1016/1044-5803(95)00063-1 ↗
2. Aluminium: Physical Properties, Characteristics and Alloys
3. Light Metals and Alloys: Aluminum and Aluminum Alloys10.31399/asm.tb.aub.t61170351 ↗
4. Davis · 1993
5. Recent Developments in Advanced Aircraft Aluminium Alloys10.1016/j.matdes.2013.12.002 ↗
6. Smiths Metal Centers · 2017
7. Minnicino · 200910.21236/ADA506416 ↗
8. On the Selection of Johnson–Cook Constitutive Model Parameters for Ti-6Al-4V Using Three Types of Numerical Models of Orthogonal Cutting10.1016/j.procir.2015.03.052 ↗
9. 3-D Finite Element Process Simulation of Micro-End Milling Ti-6Al-4V Titanium Alloy: Experimental Validations on Chip Flow and Tool Wear10.1016/j.jmatprotec.2015.02.019 ↗
10. Experimental and Numerical Evaluation of Thickness Reduction in Steel Plate Heat Exchangers10.1115/1.4031080 ↗
11. Microstructure-Based Modeling of the Impact Response of a Biomedical Niobium–Zirconium Alloy10.1557/jmr.2014.105 ↗
12. Johnson–Cook Based Criterion Incorporating Stress Triaxiality and Deviatoric Effect for Predicting Elevated Temperature Ductility of Titanium Alloy Sheets10.1016/j.ijmecsci.2017.02.005 ↗
13. An Enhanced Constitutive Material Model for Machining of Ti-6Al-4V Alloy10.1016/j.jmatprotec.2013.06.015 ↗
14. Temperature Dependent Work Hardening in Ti–6Al–4V Alloy Over Large Temperature and Strain Rate Ranges: Experiments and Constitutive Modeling10.1016/j.matdes.2015.06.048 ↗
15. Anisotropic Effects on Constitutive Model Parameters of Aluminum Alloys10.1063/1.3686224 ↗
16. A Modified Johnson–Cook Model for Tensile Flow Behaviors of 7050-T7451 Aluminum Alloy at High Strain Rates10.1016/j.msea.2015.02.010 ↗
17. A Modified Johnson–Cook Model of Dynamic Tensile Behaviors for 7075-T6 Aluminum Alloy10.1016/j.jallcom.2014.09.002 ↗
18. Constitutive Model Constants for Al7075-T651 and Al7075-T610.1063/1.3295300 ↗
19. Moré · 1978
20. Nonrigid Image Registration Using Efficient Similarity Measure and Levenberg-Marquardt Optimization10.1007/s13534-012-0062-y ↗
21. Elasticity and Plasticity10.1007/BF03185037 ↗
22. High Strain Rate Tensile Behavior of Al–4.8Cu–1.2Mg Alloy10.1016/j.msea.2015.11.030 ↗
23. A Study of Inconel 718 Dependency on Stress Triaxiality and Lode Angle in Plastic Deformation and Ductile Fracture10.1016/j.engfracmech.2015.08.007 ↗
24. A New Experimental Failure Model Based on Triaxiality Factor and Lode Angle for X-100 Pipeline Steel10.1016/j.ijmecsci.2014.01.007 ↗
25. Bridgman · 1952
26. Bao, Y. , 2003, “Prediction of Ductile Crack Formation in Uncracked Bodies,” Ph.d thesis, Massachusetts Institute of Technology, Cambridge, pp. 252.
27. On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space10.1016/j.ijmecsci.2004.02.006 ↗
28. On the Application of Stress Triaxiality Formula for Plane Strain Fracture Testing10.1115/1.3078390 ↗
29. Estimation of the Onset of Crack Growth in Ductile Materials10.3390/ma11102026 ↗
30. Study of the Constitutive Behavior of 7075-T651 Aluminum Alloy10.1016/j.ijimpeng.2017.05.002 ↗
31. A Microstructure-Sensitive Model for Simulating the Impact Response of an High-Manganese Austenitic Steel10.1115/1.4033559 ↗
32. Determination of the Constants of Damage Models10.1016/j.proeng.2011.04.127 ↗
33. Temperature and Strain Rate Effects on the Dynamic Strain Ageing of Aluminium Alloy AA703010.4028/www.scientific.net/MSF.519-521.883 ↗
34. Tensile Deformation Behavior of Aluminum Alloys at Warm Forming Temperatures10.1016/S0921-5093(02)00915-2 ↗
35. Strain Rate and Temperature Dependence of the Dynamic Impact Properties of 7075 Aluminum Alloy10.1016/S0924-0136(99)00465-3 ↗
36. Multi-Scale Modeling of the Impact Response of a Strain-Rate Sensitive High-Manganese Austenitic Steel10.3389/fmats.2014.00016 ↗
37. Incorporation of Dynamic Strain Aging Into a Viscoplastic Self-Consistent Model for Predicting the Negative Strain Rate Sensitivity of Hadfield Steel10.1115/1.4033072 ↗
38. On the Negative Strain Rate Sensitivity of Hadfield Steel10.1016/j.scriptamat.2008.07.027 ↗
39. Investigating the Portevin-Le ChâTelier Effect in Strain Rate and Stress Rate Controlled Tests by the Acoustic Emission and Laser Extensometry Techniques10.1016/j.msea.2006.01.169 ↗
40. Localized Deformation Due to Portevin–LeChatelier Effect in 18Mn–0.6C TWIP Austenitic Steel10.2355/isijinternational.47.1804 ↗
41. Collinson, M. ,2014, “On the Characterisation of Shock-Induced Sliding Along Multi-Material Interfaces,” Ph.D thesis, Imperial College London, London.