journal article·2024-07-01

Investigation on Mechanical and Fracture Behavior of Magnesium Composite Reinforced With Hybrid Fly Ash Particulates Synthesized via Friction Stir Processing Route

Prem Sagar, Sushma Sangwan, Amit Handa

Publisher page

Abstract

Abstract Utilizing waste materials like fly ash in the creation of lightweight magnesium metal matrix composites with a high strength-to-weight ratio is encouraged by the rising demand for in-expensive reinforcements. In the current study, friction stir processing (FSP) was employed to synthesize magnesium surface composites via incorporating hybrid reinforcement particles, including nano titanium carbide and fly ash. The synthesized composite material underwent examination through microscopic images of the stir zone and assessments of microhardness, tensile strength, compressive strength, electrical and thermal conductance, and wear behavior. The results revealed a notable refinement in grain size and a simultaneous improvement in mechanical properties. Notably, there was a substantial increase in wear resistance attributed to the increased hardness and uniform dispersion of hybrid reinforcements within the surface composite. The results demonstrate that the inclusion of reinforcements in magnesium-based alloy led to an enhancement in fracture toughness, mitigation of crack propagation, and an overall improvement in fracture resistance to catastrophic failure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Technological Institute of Textile & Sciences Department of Mechanical Engineering, , Bhiwani, Haryana 127021 , India

Sumit Dhariwal Memorial group of institutions , Hisar, Haryana 125001 , India

I. K. Gujral Punjab Technical University Department of Mechanical Engineering, , Kapurthala, Punjab 144603 , India

References (43)

Show source-provided references
1. Metallurgical Analysis of Magnetic Pulse Welds of AZ31 Magnesium Alloy10.1179/1362171811Y.0000000070 ↗
2. Potential Magnesium Alloys for High Temperature Die Cast Automotive Applications: A Review10.1081/AMP-120024970 ↗
3. Fabrication of SiC Particle Reinforced Composite on Aluminium Surface by Friction Stir Processing10.1179/136217108X333327 ↗
4. On the High-Temperature Flow Response of Friction Stir Processed Magnesium Metal Matrix Composites10.1115/1.4047966 ↗
5. Determining Process-Window for Manufacturing of Continuous Carbon Fiber-Reinforced Composite Using 3D-Printing10.1080/10426914.2020.1843664 ↗
6. The Hot Workability of SiC p /2024 Al Composite by Stir Casting10.1080/10426914.2014.952027 ↗
7. Manufacturing of High-Performance Al356/SiCp Composite by CAR Process10.1080/10426914.2011.577879 ↗
8. A Comprehensive Review of Recent Progress in Fabrication of Magnesium Base Composites by Friction Stir Processing Technique—A Review10.3934/matersci.2020.5.684 ↗
9. Characterisation of Interface of Steel/Magnesium FSW10.1179/1362171810Y.0000000012 ↗
10. Review of Research Progress on Aluminium–Magnesium Dissimilar Friction Stir Welding10.1080/13621718.2017.1370193 ↗
11. Influence of Texture Evolution on Mechanical and Damping Properties of SiC/Li2ZrO3/Al Composite Through Friction Stir Processing10.1115/1.4045495 ↗
12. Selection of Tool Transverse Speed Considering Trial Run Experimentations for AZ61/Tic Composite Developed via Friction Stir Processing Using Triangular Tool10.1016/j.matpr.2020.06.537 ↗
13. Prediction of Wear Resistance Model for Magnesium Metal Composite by Response Surface Methodology Using Central Composite Design10.1108/WJE-08-2020-0379 ↗
14. Metallurgical, Mechanical and Tribological Behavior of Reinforced Magnesium-Based Composite Developed via Friction Stir Processing10.1177/09544089211063099 ↗
15. Strengthening and Improving Yield Asymmetry of Magnesium Alloys by Second Phase Particle Refinement Under the Guidance of Integrated Computational Materials Engineering10.1115/1.4030356 ↗
16. Study on Surface Modification and Fabrication of Surface Composites of Magnesium Alloys by Friction Stir Processing: A Review10.1186/s44147-022-00073-9 ↗
17. Nanocomposite Hydrogel Materials for Defective Cartilage Repair and Its Mechanical Tribological Behavior—A Review10.1213/j.issn.2096-2355.2022.03.007 ↗
18. Progressive Use of Nanocomposite Hydrogels Materials for Regeneration of Damaged Cartilage and Their Tribological Mechanical Properties10.1177/23977914231151487 ↗
19. An Investigation on the Effect of Axial Pressures on the Mechanical Properties of Friction Welded Dissimilar Steels10.1155/2014/639378 ↗
20. Evaluation of Tensile Strength and Fracture Behavior of Friction Welded Dissimilar Steels Under Different Rotational Speeds and Axial Pressures10.1007/s12046-015-0389-z ↗
21. Investigation of Mechanical Properties of Friction-Welded AISI 304 With AISI 1021 Dissimilar Steels10.1007/s00170-014-6238-0 ↗
22. Experimental Study of Mechanical Properties of Friction Welded AISI 1021 Steels10.1007/s12046-013-0181-x ↗
23. Effect of Mono and Hybrid Ceramic Reinforcement Particles on the Tribological Behavior of the AZ31 Matrix Surface Composites Developed by Friction Stir Processing10.1016/j.ceramint.2020.05.123 ↗
24. Fabrication and Characterization of Magnesium Based Surface Composites With Hybrid Reinforcements by Friction Stir Processing: A Review10.1016/j.matpr.2021.03.694 ↗
25. Machining Characteristics, Wear and Corrosion Behavior of AZ91 Magnesium Alloy—Fly Ash Composites Produced by Friction Stir Processing10.1002/mawe.202000101 ↗
26. Low Cost Metal Matrix Composites Based on Aluminum, Magnesium and Copper Reinforced With Fly Ash Prepared Using Friction Stir Processing10.1016/j.coco.2018.04.007 ↗
27. Micro Thermal Behavior of Ti-Mg Composite Processed Through Friction Stir Processing10.1016/j.matpr.2022.12.125 ↗
28. Acetic Acid Etching of Mg-XGd Alloys10.3390/met9020117 ↗
29. Preparation of High Strength Graphene Reinforced Cu-Based Nanocomposites via Mechanical Alloying Method: Microstructural, Mechanical and Electrical Properties10.1007/s00339-020-3412-0 ↗
30. Barium Titanate Reinforced Nickel Aluminium Bronze Surface Composite by Friction Stir Processing10.1080/02670836.2017.1393203 ↗
31. Friction Stir Welding of Precipitation Strengthened Aluminium Alloys: Scope and Challenges10.1179/1362171811Y.0000000020 ↗
32. Breaks in the Hall-Petch Relationship After Severe Plastic Deformation of Magnesium, Aluminum, Copper, and Iron10.3390/cryst13030413 ↗
33. Effect of Process Parameter on Mechanical Properties and Fracture Behavior of AZ91C/SiO2 Composite Fabricated by FSP10.1016/j.msea.2015.12.103 ↗
34. Investigation on Mechanical and Tribological Characteristics Cu/Si3N4 Surface Composite Developed Through Friction Stir Processing10.1007/s12633-021-01206-0 ↗
35. Investigations on Micro Hardness, Electrical and Thermal Conductivity of AA7075 Surface Hybrid Composites Produced Through Friction Stir Processing10.1088/2053-1591/ab47e3 ↗
36. Rudajevová · Microstructural Investigation and Analysis · 200010.1002/3527606165.ch27 ↗
37. Thermal Cycles Behavior and Microstructure of AZ31/SiC Composite Prepared by Stir Casting10.1038/s41598-022-19410-2 ↗
38. Effect of Nano ZrO2 on Strengthening and Electrical Properties of Cu-Matrix Nanocomposites Prepared by Mechanical Alloying10.1016/j.ceramint.2017.06.153 ↗
39. Ultrafine Grained Copper Alloy Sheets Having Both High Strength and High Electric Conductivity10.1016/j.matlet.2009.05.021 ↗
40. Development of High Strength and High Electrical Conductivity Cu/Gr Composites Through Friction Stir Processing10.1016/j.matlet.2020.127437 ↗
41. Investigation on Mechanical and Wear Properties of ZE43 Magnesium Composites Reinforced With Silicon Nitride by Friction Stir Processing10.1007/s12633-022-01914-1 ↗
42. Enhanced Strength Ductility and Wear Resistance in a Friction Stir Processing Engineered AZ31B/TiC Magnesium-Based Nanocomposites10.1080/00084433.2023.2289800 ↗
43. Exploring the Mechanical, Metallurgical, and Fracture Characteristics of Hybrid-Reinforced Magnesium Metal Matrix Composite Synthesized via Friction Stir Processing Route10.1177/14644207231200640 ↗