Extraction of Equivalent Stress Versus Equivalent Plastic Strain Curve of Necking Material in Tensile Test Without Assuming Constitutive Model
Source abstract
Abstract
Abstract An algorithm for extracting the equivalent stress versus equivalent plastic strain curve of a necking material in tensile test is proposed (the curve is called here the equivalent-plastic (EP) stress–strain (SS) curve). The presented algorithm traces the force–elongation curve via iterative finite element (FE) simulations without assuming a constitutive model and is suitable for a general-purpose FE solver available to a general audience. In the FE simulation and experiment, a slightly tapered geometry was employed around the specimen center to stably initiate necking there. The proposed algorithm and mentioned necking initiation method have been applied to extracting the EP SS curve of a high-strength steel material using an axisymmetric specimen. Because necking was initiated stably in simulation at the specimen center for a range of mesh sizes, the convergence of the extracted EP SS curve with the mesh size could be successfully verified. The EP SS curve of the tested material was extracted up to an EP strain of 0.85 with average strain intervals of approximately 2.5 mili-strain. The error values were less than 0.2 and 0.1% after four and seven FE simulations, respectively. The presented algorithm and necking initiation method in simulation can also be used for simultaneously quantifying the fracture EP strain of a necking material in the tensile test.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Gangneung-Wonju National University Mechanics of Materials and Design Laboratory, Department of Materials Engineering, , 7 Jugheon-ghil, Gangneung, Gangwon-do 25457 , South Korea
Chonnam National University Laboratory of Smart Structures and Materials, Department of Mechanical Design and Engineering, , 50 Daehak-ro, Yeosu, Jeonnam 59626 , South Korea
Agency for Defense Development , P.O. Box 35-5, Yuseong, Daejeon 34186 , South Korea
Funding
Agency for Defense Development
References (68)
Show source-provided references
1. Kim · 201510.1007/978-1-4419-1746-1 ↗
2. Borja · 201310.1007/978-3-642-38547-6 ↗
3. A Unique Method to Determine Ferrite and Martensite Phase Stress–Strain Curve for Manufacturing Process10.1115/1.4056033 ↗
4. Flow Stress Description Characteristics of Some Constitutive Models at Wide Strain Rates and Temperatures10.3390/technologies10020052 ↗
5. A Plasticity Model for Metals With Dependency on All the Stress Invariants10.1115/1.4007386 ↗
6. Expanding Cavity Model Combined With Johnson–Cook Constitutive Equation for the Dynamic Indentation Problem10.1115/1.4045329 ↗
7. A Phenomenological Constitutive Equation to Describe Various Flow Stress Behaviors of Materials in Wide Strain Rate and Temperature Regimes10.1115/1.4000225 ↗
8. The Use of Genetic Algorithms to Calibrate Johnson–Cook Strength and Failure Parameters of AISI/SAE 1018 Steel10.1115/1.4042382 ↗
9. Crystal Viscoplasticity of a Ni-Base Superalloy in the Aged State10.1115/1.4040222 ↗
10. Postnecking Elastoplastic Characterization: Degree of Approximation in the Bridgman Method and Properties of the Flow-Stress/True-Stress Ratio10.1007/s11661-003-0096-y ↗
11. Gromada · 201110.1007/978-3-642-22134-7 ↗
12. A New Approach for the Correction of Stress–Strain Curves After Necking in Metals10.1177/0309324714555384 ↗
13. A New Model for the Elastoplastic Characterization and the Stress–Strain Determination on the Necking Section of a Tensile Specimen10.1016/j.ijsolstr.2004.02.011 ↗
14. A Method for Determining Material’s Equivalent Stress-Strain Curve With Any Axisymmetric Notched Tensile Specimens Without Bridgman Correction10.1016/j.ijmecsci.2017.12.012 ↗
15. A New Approach for Evaluation True Stress–Strain Curve From Tensile Specimens for DC04 Steel With Vision Measurement in the Post-Necking Phases10.3390/ma16020558 ↗
16. Influence of Specimen Thickness With Rectangular Cross-Section on the Tensile Properties of Structural Steels10.1016/j.msea.2011.11.021 ↗
17. Study on True Stress Correction From Tensile Tests10.1007/s12206-008-0302-3 ↗
18. Procedure for the Determination of True Stress–Strain Curves From Tensile Tests With Rectangular Cross-Section Specimens10.1115/1.1633573 ↗
19. Uniaxial True Stress-Strain After Necking
20. Simplified Method to Identify Full von Mises Stress-Strain Curve of Structural Metals10.1016/j.jcsr.2021.106624 ↗
21. An Advanced Post-Necking Analysis Methodology for Elasto-Plastic Material Models Identification10.1016/j.matdes.2023.111937 ↗
22. Inverse Determination of the Flow Curve in Large Range of Strains for Cylindrical Tensile Specimen10.1177/0954406220904118 ↗
23. Experimental and Numerical Analysis of the Tensile Test Using Sheet Specimens10.1016/S0168-874X(03)00096-9 ↗
24. A New Method for Acquiring True Stress–Strain Curves Over a Large Range of Strains Using a Tensile Test and Finite Element Method10.1016/j.mechmat.2007.11.006 ↗
25. Computer-Aided Identification of the Yield Curve of a Sheet Metal After Onset of Necking10.1016/j.commatsci.2004.02.004 ↗
26. A Review of Flow Characterization of Metallic Materials in the Cold Forming Temperature Range and Its Major Issues10.3390/ma15082751 ↗
27. Determination of True Stress-Strain Curve of Type 304 and 316 Stainless Steels Using a Typical Tensile Test and Finite Element Analysis10.1016/j.net.2020.07.014 ↗
28. On Acquiring True Stress–Strain Curves for Sheet Specimens Using Tensile Test and FE Analysis Based on a Local Necking Criterion10.1557/jmr.2014.24 ↗
29. A Novel Flow Model of Strain Hardening and Softening for Use in Tensile Testing of a Cylindrical Specimen at Room Temperature10.3390/ma14174876 ↗
30. General Blending Approach of Fundamental Cold Flow Models for an Almost Complete Cold Flow Model in Terms of Tensile Test10.1002/srin.202200540 ↗
31. Identification of Post-Necking Stress–Strain Curve for Sheet Metals by Inverse Method10.1016/j.mechmat.2015.09.004 ↗
32. A Method for Developing the True Stress–Strain Relationship for Structural Steels Based on Tension Coupon Tests
33. Stepwise Modelling Method for Post Necking Characterisation of Anisotropic Sheet Metal10.1088/1361-651X/ac2797 ↗
34. An Efficient Method to Estimate the Post-Necking Behavior of Sheet Metals10.1007/s00170-018-2399-6 ↗
35. Time-Resolved Integrated Digital Image Correlation10.1002/nme.4882 ↗
36. Characterization of the Post-Necking Strain Hardening Behavior Using the Virtual Fields Method10.1016/j.ijsolstr.2013.07.018 ↗
37. Characterisation of Materials Subjected to Large Strains by Inverse Modelling Based on In-Plane Displacement Fields10.1016/j.ijsolstr.2004.02.021 ↗
38. Displacement Based Simulation and Material Calibration Based on Digital Image Correlation Part II—Application10.1088/1757-899X/1284/1/012056 ↗
39. Coupling Digital Image Correlation and Finite Element Analysis to Determine Constitutive Parameters in Necking Tensile Specimens10.1016/j.ijsolstr.2016.06.038 ↗
40. On the Extraction of Elastic–Plastic Constitutive Properties From Three-Dimensional Deformation Measurements10.1115/1.4030322 ↗
41. Numerical Analysis of the Stress-Strain Curve and Fracture Initiation for Ductile Material10.1016/0013-7944(94)90006-X ↗
42. True Stress–True Strain Curves Obtained by Simulating Tensile Tests Using Finite Element Program (In Korean)10.3795/KSME-A.2011.35.1.025 ↗
43. A Procedure for Determining the True Stress–Strain Curve Over a Large Range of Strains Using Digital Image Correlation and Finite Element Analysis10.1016/j.mechmat.2011.02.007 ↗
44. An Experimental-Numerical Combined Method to Determine the True Constitutive Relation of Tensile Specimens After Necking10.1155/2016/6015752 ↗
45. Evaluation Study on Iterative Inverse Modeling Procedure for Determining Post-Necking Hardening Behavior of Sheet Metal at Elevated Temperature10.3390/met8121044 ↗
46. An Iterative Procedure for Determining Effective Stress–Strain Curves of Sheet Metals10.1007/s10999-008-9082-2 ↗
47. Determination of Anisotropy and Material Hardening for Aluminum Sheet Metal10.1016/j.ijsolstr.2012.01.011 ↗
48. Finite Element Analysis of Tensile Testing With Emphasis on Necking10.1016/j.commatsci.2007.03.002 ↗
49. Post-Yielding Stress-Strain Determination Using Spherical Indentation10.1080/15376490500448607 ↗
50. Determination of the Flow Stress–Strain Curve of Aluminum Alloy and Tantalum Using the Compressive Load–Displacement Curve of a Hat-Type Specimen10.1115/1.4042138 ↗
51. Strain and Stress Relation for Non-Linear Finite Element Simulations10.1016/j.tws.2009.04.005 ↗
52. Smith · 2009
53. Matweb, Material Property Data · 2023
54. Modeling and Numerical Computation of Necking in Round Bars Using a Total Lagrangian Elastoplastic Formulation10.3970/cmes.2001.002.063 ↗
55. Finite Element Analysis of the Onset of Necking and the Post-Necking Behaviour During Uniaxial Tensile Testing10.2320/matertrans.46.2159 ↗
56. Uniaxial Nonlocal Formulation for Geometric Nonlinearity–Induced Necking and Buckling Localization in a Steel Bar10.1061/(ASCE)ST.1943-541X.0001827 ↗
57. Effects of Inertia on Dynamic Neck Formation in Tensile Bars10.1016/S0997-7538(01)01163-9 ↗
58. Initiation and Propagation of Localized Deformation in Elasto-Plastic Strips Under Uniaxial Tension10.1016/S0749-6419(97)00062-4 ↗
59. Computational Simulation of Three-Dimensional Neck Propagation in Polymeric Specimens Under Tension and Hybrid Identification of Constitutive Equation10.1016/S0020-7403(96)00096-3 ↗
60. Numerical Analysis and Modeling of Large Deformation and Necking Behavior of Tensile Specimens10.1016/S0168-874X(97)00042-5 ↗
61. Prediction of Sheet Necking With Shell Finite Element Models
62. Panchal · 2013
63. Calibration and Evaluation of Seven Fracture Models10.1016/j.ijmecsci.2005.03.003 ↗
64. A Determination Procedure for Element Elimination Criterion in Finite Element Analysis of High-Strain-Rate Impact/Penetration Phenomena10.1299/jsmea.47.35 ↗
65. A Study of the Strain Response of Stainless Steel 304 to Extreme Uniform Instantaneous Explosion Pressure Loads10.1115/1.4044439 ↗
66. Evolution of Specimen Strain Rate in Split Hopkinson Bar Test10.1177/0954406218813386 ↗
67. Sound Speed and Poisson’s Ratio Calibration of (Split) Hopkinson Bar via Iterative Dispersion Correction of Elastic Wave10.1115/1.4054107 ↗
68. Calibration of Bar Properties, Measured Strain, and Impact Velocity in a Bar Impact Test10.1080/15376494.2023.2224797 ↗