journal article·2023-10-01

Influence of Diffusion Bonding Pressure on Microstructural Features and Strength Performance of Dissimilar Ti–6Al–4V Alloy and AISI 304 Steel Joints Developed Using Copper Interlayer

A. Arun Negemiya, Selvarajan Rajakumar, Tushar Sonar, Mikhail Ivanov

Publisher page

Abstract

Abstract The joining of Ti–6Al–4V (Ti64) alloy and AISI 304 austenitic stainless steel (ASS 304) carries significant importance in aeroengines for turbine blade applications. However, it is difficult to join using fusion welding. The fusion welding of Ti64 alloy and ASS 304 steel promotes the evolution of various Fe–Cr–Ti and Fe–Ti intermetallics in weld zone owing to limited solid solubility of Fe, Cr, Ti, and Ni with each other. The evolution of these intermetallics deteriorates the strength performance of joints. Hence for joining Ti64 alloy and ASS 304 steel, vacuum diffusion bonding (VDB) method is employed with thin copper (Cu) foil as an interlayer. The DB pressure extends significant influence on microstructural evolution and strength of joints. So, for the feasibility of joining Ti64 alloy and ASS 304 steel, the effect of DB pressure on microstructure and strength of joints is investigated. Results showed that the dissimilar joints of Ti64 alloy and ASS 304 steel developed using the DB pressure of 14 MPa exhibited greater lap shear strength (LSS) and bonding strength (BS) of 180 MPa and 268 MPa, respectively. It is attributed to the improved coalescence of joining interface and the development of ideal bonding width with the least amount of embrittlement consequences. An increase in DB pressure increases the width of the diffusion region which promotes the development of detrimental intermetallics of Ti–Fe and deteriorates the strength of dissimilar joints.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Sri Shakthi Institute of Engineering and Technology Department of Mechanical Engineering, , Coimbatore, Tamil Nadu 641 062 , India

Annamalai University Centre for Materials Joining and Research (CEMAJOR), Department of Manufacturing Engineering, , Annamalai Nagar, Tamil Nadu 608 002 , India

South Ural State University (National Research University) Department of Welding Engineering, Institution of Engineering and Technology, , Chelyabinsk 454080 , Russia

Funding

University Grants Commission

References (32)

Show source-provided references
1. Optimization of Vacuum Brazing Process Parameters in Ti-6Al-4 V Alloy10.3390/met12060974 ↗
2. Vacuum Diffusion Bonding of α-Titanium Alloy to Stainless Steel for Aerospace Applications: Interfacial Microstructure and Mechanical Characteristics10.1016/j.matchar.2021.111607 ↗
3. A Review on Diffusion Bonding Between Titanium Alloys and Stainless Steels10.1155/2018/8701890 ↗
4. Diffusion Bonding of TI-6AL-4 V to AISI 316L Stainless Steel: Mechanical Resistance and Interface Microstructure10.1023/A:1015845822629 ↗
5. High-temperature Diffusion Bonding of Austenitic Stainless Steel to Titanium Dissimilar Joints10.1088/2053-1591/ab1053 ↗
6. Investigation on Processing Maps of Diffusion Bonding Process Parameters for Ti-6Al-4 V/AISI304 Dissimilar Joints10.1155/2021/5601970 ↗
7. Effect of Bonding Temperature on the Microstructure and Mechanical Properties of Ti-6Al-4 V to AISI 304 Transient Liquid Phase Bonded Joint10.1016/j.matdes.2016.03.101 ↗
8. Interface Microstructure and Strength Properties of Ti–6Al–4 V and Microduplex Stainless Steel Diffusion Bonded Joints10.1016/j.matdes.2010.12.052 ↗
9. Evaluation of Interface Microstructure and Mechanical Properties of the Diffusion Bonded Joints of Ti–6Al–4 V Alloy to Micro-Duplex Stainless Steel10.1016/j.msea.2011.02.050 ↗
10. Influence of Interface Microstructure on the Strength of the Transition Joint Between Ti-6Al-4 V and Stainless Steel10.1007/s11661-005-0052-0 ↗
11. Diffusion Bonding of Titanium to 304 Stainless Steel10.1016/j.jnucmat.2003.07.004 ↗
12. Diffusion Bonding of a Microduplex Stainless Steel to Ti–6Al–4 V10.1016/S1359-6462(01)01041-7 ↗
13. Diffusion Bonding Between Ti–6Al–4 V Alloy and Ferritic Stainless Steel10.1016/j.matlet.2006.07.123 ↗
14. Diffusion Bonding of Commercially Pure Titanium to 304 Stainless Steel Using Copper Interlayer10.1016/j.msea.2005.07.010 ↗
15. Diffusion Bonding Technology of a Titanium Alloy to a Stainless Steel Web With an Ni Interlayer10.1016/S1044-5803(99)00008-X ↗
16. Phase Transformation Diffusion Bonding of Titanium Alloy With Stainless Steel10.1016/j.matchar.2005.09.015 ↗
17. Hot Pressing Diffusion Bonding of a Titanium Alloy to a Stainless Steel With an Aluminum Alloy Interlayer10.1016/j.msea.2007.08.076 ↗
18. Diffusion Bonding Titanium to Stainless Steel Using Nb/Cu/Ni Multi-Interlayer10.1016/j.matchar.2012.03.016 ↗
19. Low Temperature Diffusion Bonding of Ti-6Al-4 V and Duplex Stainless Steel10.1016/j.jmatprotec.2016.03.013 ↗
20. Diffusion Bonding Between Ti-6Al-4 V Alloy and Microduplex Stainless Steel With Copper Interlayer10.1179/026708301125000230 ↗
21. The Effect of Interlayer Thickness on Liquid State Diffusion Bonding Behavior of Dissimilar Stainless Steel 316/Ti-6Al-4 V System10.1016/j.matlet.2014.11.158 ↗
22. Evaluation of the Microstructure and Mechanical Properties of Diffusion Bonded Joints of Titanium to Stainless Steel with a Pure Silver Interlayer10.1016/j.matdes.2012.09.058 ↗
23. Exhibition of Veiled Features in Diffusion Bonding of Titanium Alloy and Stainless Steel via Copper10.1051/metal/2017080 ↗
24. Application of Box–Behnken Design for Fabrication of Titanium Alloy and 304 Stainless Steel Joints With Silver Interlayer by Diffusion Bonding10.1016/j.matdes.2015.04.003 ↗
25. Interfacial Properties of Diffusion Bonded Ti-6Al-4 V to AISI 304 Stainless Steel by Inserting a Cu Interlayer10.1007/s00170-008-1493-6 ↗
26. Effect of Bonding Temperature on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4 V and 304 Stainless Steel Using Nickel as an Intermediate Material10.1007/s11661-013-1940-3 ↗
27. Effect of Bonding Time on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4 V and 304 Stainless Steel Using Nickel as an Intermediate Material10.1007/s11661-013-2135-7 ↗
28. Effect of Phase Transformation and Intermetallic Compounds on the Microstructure and Tensile Strength Properties of Diffusion-Bonded Joints Between Ti–6Al–4 V and AISI 304L10.1016/j.matdes.2011.12.024 ↗
29. Development of Processing Windows for Diffusion Bonding of Ti–6Al–4 V Titanium Alloy and 304 Stainless Steel With Silver as Intermediate Layer10.1016/S1003-6326(15)63919-X ↗
30. Effect of Bonding Time on the Joint Properties of Transient Liquid Phase Bonding Between Ti–6Al–4 V and AISI 30410.1016/j.jallcom.2017.01.091 ↗
31. Diffusion Bonding of a Titanium Alloy to Austenitic Stainless Steel Using Copper as an Interlayer10.1007/s42452-019-1189-6 ↗
32. Effect of Diffusion Bonding Time on Microstructure and Mechanical Properties of Dissimilar Ti6Al4V Titanium Alloy and AISI 304 Austenitic Stainless Steel Joints10.1515/mt-2022-0209 ↗