Ultrasound Assisted Hybrid Carbon Epoxy Composites Containing Carbon Nanotubes
Source abstract
Abstract
A simple approach has been reported toward the development of hybrid nano/microfiber composite structures with improved mechanical properties. Ultrasound assisted atomization process has been utilized for depositing carbon nanotubes (CNTs) on the surface of carbon fiber (CF) cloth using dilute solutions of CNTs in N, N-dimethylformamide (DMF). Dilute solutions with three different CNT concentrations such as 1 × 10−4 g/ml, 5 × 10−4 g/ml, and 10 × 10−4 g/ml were fed into an ultrasonic atomizer probe using a positive displacement syringe pump and sprayed directly on CF cloth rested on a hot plate inside a deposition chamber. Several layers of hybrid CF cloths containing CNTs were used to fabricate composite laminates using a vacuum assisted resin transfer molding (VARTM). Although the dispersion of CNTs in DMF was found very well for all three concentrations, the distribution of CNTs on CFs was only found homogeneous for 1 × 10−4 g/ml solution. It was found that the hybrid composite containing 0.3 wt. % CNTs loading fabricated using 1 × 10−4 g/ml solution showed about 25% improvement in flexural strength, although moderate improvement in flexure modulus was achieved for all three concentrations. The improved strength is believed to be due to homogeneous distribution of CNTs, which resulted in increased surface roughness and mechanical interlocking between fibers and matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Fiber-reinforced polymer composites · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
e-mail: School of Aerospace and Mechanical Engineering, University of Oklahoma, Norman, OK 73019
References (17)
Show source-provided references
1. Helical Microtubules of Graphitic Carbon10.1038/354056a0 ↗
2. Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes10.1103/PhysRevLett.82.944 ↗
3. Nanomechanics of Carbon Tubes: Instabilities Beyond Linear Response10.1103/PhysRevLett.76.2511 ↗
4. Fabrication and Multifunctional Properties of a Hybrid Laminate With Aligned Carbon Nanotubes Grown In Situ10.1016/j.compscitech.2008.02.028 ↗
5. Growth of Carbon Nanotubes on Carbon Fiber Substrates to Produce Hybrid/Phenolic Composites With Improved Mechanical Properties
6. Manufacturing Carbon Nanofibers Toughened Plyester/Glass Fiber Composites Using Assisted Resin Transfer Molding for Enhancing the Mode-I Delamination Resistance10.1016/j.compositesa.2005.09.010 ↗
7. Buckling and Collapse of Embedded Carbon Nanotubes10.1103/PhysRevLett.81.1638 ↗
8. Crystalline Ropes of Metallic Carbon Nanotubes10.1126/science.273.5274.483 ↗
9. Polymer Nanotube Composites: Promises and Current Challenges
10. In-Situ Amino Functionalization of Carbon Nanotubes Using Ball Milling10.1166/jnn.2009.C017 ↗
11. Mechanical Properties and Interfacial Characteristics of Carbon-Nanotubes-Reinforced Epoxy Thin Films10.1063/1.1511532 ↗
12. Micro-Mechanical Properties and Morphological Observation on Fracture Surfaces of Carbon Nanotube Composites Pre-Treated at Different Temperatures10.1016/S0266-3538(03)00038-1 ↗
13. Carbon Nanotube Polymer Composites10.1016/j.cossms.2003.10.006 ↗
14. Effect of Chemical Functionalization on the Mechanical Properties of Carbon Nanotubes10.1016/S0009-2614(98)00969-5 ↗
15. Multiscale Carbon Nanotube-Cabon Fiber Reinforcement for Advanced Epoxy Composites10.1021/la062743p ↗
16. 1998
17. Practical Design of Ultrasonic Spray Devices: Experimental Testing of Several Atomizer Geometries