journal article·2019-04-01

Mechanical and Electrical Characterization of Two Carbon/Ultra High Molecular Weight Polyethylene Composites Created Via Equal Channel Angular Processing

David J. Cook, Hayden H. Chun, Douglas W. Van Citters

Publisher page

Abstract

Ultra-high-molecular-weight-polyethylene (UHMWPE) has the greatest impact strength of any thermoplastic and has a variety of both industrial and biomedical applications. Equal channel angular processing (ECAP) is a fabrication method for UHMWPE that introduces shear into the polymer matrix by deforming the polymer through an angular channel, with the goal of enhancing mechanical properties. Both nanographite (NG) and carbon black (CB) attract interest as potential carbon additives for use in creating UHMWPE conductive polymer composites (CPC), but they have not yet been extensively tested in conjunction with ECAP. This study presents a systematic evaluation of the mechanical and electrical properties of 1.0 wt % CB/UHMWPE and NG/UHMWPE composites created using ECAP. These samples are compared against pure UHMWPE ECAP controls as well as compression molded (CM) composite samples. Results indicate that both NG and CB carbon additives successfully create CPCs with a corresponding decrease in mechanical properties. ECAP results in comparatively high mechanical and conductive properties when compared with compression molding. Electrical conductivity is shown to be inversely correlated with tensile strain in a repeatable manner, and microstructural theory is discussed. This work suggests a method to produce flexible, conductive UHMWPE composites that vary consistently and predictably with applied strain, which could have a variety of biomedical and industrial applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Polymer crystallization and properties · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Thayer School of Engineering at Dartmouth College, 14 Engineering Drive, Hanover, NH 03755 e-mail:

References (45)

Show source-provided references
1. The Microstructure of Ultra-High Molecular Weight Polyethylene Used in Total Joint Replacements10.1016/S0142-9612(97)00143-9 ↗
2. Long-Term Performance and Wear of Ultrahigh-Molecular-Weight Polyethylene in Total Joint Replacement Prostheses: A Brief Overview and Perspective
3. Wear Mechanisms of UHMWPE in Total Joint Replacements10.1016/0043-1648(94)07027-X ↗
4. Oxidation of Orthopaedic UHMWPE10.1016/S0142-9612(01)00288-5 ↗
5. Ultra-High Molecular Weight Polyethylene: Influence of the Chemical, Physical and Mechanical Properties on the Wear Behavior. A Review10.3390/ma10070791 ↗
6. 2016
7. Dumitriu · 2002
8. The Mechanical Property and Tribological Behavior of UHMWPE: Effect of Molding Pressure10.1016/j.wear.2006.12.070 ↗
9. Equal Channel Angular Extrusion of Ultra-High Molecular Weight Polyethylene10.1016/j.msec.2016.05.085 ↗
10. Materials Processing by Simple Shear10.1016/0921-5093(95)09705-8 ↗
11. Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement10.1016/j.pmatsci.2006.02.003 ↗
12. Principle of Equal-Channel Angular Pressing for the Processing of Ultra-Fine Grained Materials10.1016/1359-6462(96)00107-8 ↗
13. Angular Extrusion for Polymer Consolidation
14. On the ‘Curiosity’ of Electrically Conductive Melt Processed Doped‐Polyaniline/Polymer Blends Versus Carbon‐Black/Polymer Compounds10.1002/(SICI)1099-1581(199708)8:8<525::AID-PAT655>3.0.CO;2-2 ↗
15. Small but Strong: A Review of the Mechanical Properties of Carbon Nanotube–Polymer Composites10.1016/j.carbon.2006.02.038 ↗
16. A Review and Analysis of Electrical Percolation in Carbon Nanotube Polymer Composites10.1016/j.compscitech.2008.06.018 ↗
17. Progress on the Morphological Control of Conductive Network in Conductive Polymer Composites and the Use as Electroactive Multifunctional Materials10.1016/j.progpolymsci.2013.07.007 ↗
18. Carbon Based Conductive Polymer Composites10.1007/s10853-007-1688-5 ↗
19. Impact of Carbon Nanotube Prelocalization on the Ultra-Low Electrical Percolation Threshold and on the Mechanical Behavior of Sintered UHMWPE-Based Nanocomposites10.1016/j.polymer.2017.01.040 ↗
20. Development of the Conductive Polymer Matrix Composite With Low Concentration of the Conductive Filler10.1016/j.matchemphys.2007.10.044 ↗
21. Self-Sensing and Mechanical Performance of CNT/GNP/UHMWPE Biocompatible Nanocomposites10.1007/s10853-018-2072-3 ↗
22. Surface-Conductive UHMWPE Fibres Via In Situ Reduction and Deposition of Graphene Oxide10.1016/j.matdes.2018.03.069 ↗
23. Preparation, Mechanical Properties and Biocompatibility of Graphene Oxide/Ultrahigh Molecular Weight Polyethylene Composites10.1016/j.eurpolymj.2012.03.011 ↗
24. Tribological Behavior of UHMWPE Reinforced With Graphene Oxide Nanosheets10.1007/s11249-012-9919-6 ↗
25. Electrically Conductive Polymer Nanocomposites as Deformation Sensors10.1016/S0266-3538(00)00175-5 ↗
26. Supercapacitors Based on Flexible Graphene/Polyaniline Nanofiber Composite Films10.1021/nn1000035 ↗
27. Piezoresistive Response of Epoxy Composites With Carbon Nanoparticles Under Tensile Load10.1103/PhysRevB.80.245437 ↗
28. Towards Tunable Sensitivity of Electrical Property to Strain for Conductive Polymer Composites Based on Thermoplastic Elastomer10.1021/am401402x ↗
29. Conducting Polymer and Conducting Composite Strain Sensors on Textiles10.1080/15421400801904690 ↗
30. Implantable Sensor Technology: Measuring Bone and Joint Biomechanics of Daily Life In Vivo10.1186/ar4138 ↗
31. Graphene Nanoplatelet-Induced Strengthening of Ultra High Molecular Weight Polyethylene and Biocompatibility In Vivo10.1021/am300244s ↗
32. Composites of Ultrahigh-Molecular-Weight Polyethylene With Graphene Sheets and/or MWCNTs With Segregated Network Structure: Preparation and Properties10.1002/mame.201100229 ↗
33. Effects of Gamma-Irradiation on UHMWPE/MWNT Nanocomposites10.1016/j.compscitech.2010.11.013 ↗
34. CNTs/UHMWPE Composites With a Two-Dimensional Conductive Network10.1016/j.matlet.2008.03.053 ↗
35. Evaluation of Resonant Acoustic Mixing Performance10.1016/j.powtec.2015.02.033 ↗
36. Standard Test Method for Tensile Properties of Plastics
37. An Improved Permanganic Etchant for Polyolefins10.1016/0032-3861(82)90110-0 ↗
38. Rolling Sliding Wear of UHMWPE for Knee Bearing Applications10.1016/j.wear.2006.11.038 ↗
39. Electrical Permittivity and Conductivity of Carbon Black‐Polyvinyl Chloride Composites10.1063/1.330027 ↗
40. Effect of Some Service Conditions on the Electrical Resistivity of Conductive Styrene–Butadiene Rubber–Carbon Black Composites10.1002/app.20227 ↗
41. Performance of Conductive Carbon Blacks in a Typical Plastics System
42. Carbon Nanotube–Polymer Composites: Chemistry, Processing, Mechanical and Electrical Properties10.1016/j.progpolymsci.2009.09.003 ↗
43. The Structure and Rheology of Molten Ultra-High-Molecular-Mass Polyethylene10.1016/0032-3861(94)90471-5 ↗
44. The Effect of the Processing Parameters on the Fabrication of Auxetic Polyethylene—Part I: The Effect of Compaction Conditions10.1007/BF00360709 ↗
45. Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants