journal article·2021-10-01

Effect of ZrO2 Nanoparticles and Mechanical Milling on Microstructure and Mechanical Properties of Al–ZrO2 Nanocomposites

Sinem Aktaş, Ege Anıl Diler

Publisher page

Abstract

Abstract Nano-aluminum powders and nano-ZrO2 reinforcement particles were mechanically milled and hot-pressed to produce Al–ZrO2 nanocomposites. Microstructure and mechanical properties of Al–ZrO2 nanocomposites were investigated using scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) analyses and by performing hardness and compression testing. Uniform particle distribution was obtained up to 3 wt% of nano-ZrO2 particles using nano-sized aluminum powders as matrix powders and by applying a mechanical milling process. As the nano-ZrO2 reinforcement particles were uniformly distributed in the matrix, the relative density of the Al–ZrO2 nanocomposites increased up to 3 wt% nano-ZrO2 particles with an increase in milling time; on the other hand, the relative density decreased and the porosity increased with high-weight fractions (>3 wt%) of nano-ZrO2 particles due to the negative combined effect of less densification and an increase in the number of particle clusters. The hardness and compressive strength of the Al–ZrO2 nanocomposites improved despite increased porosity. However, the compressive strength of Al–ZrO2 nanocomposites with a high amount (>3 wt%) of nano-ZrO2 particles began to decrease due to the negative combined effect of the less densification of the powder particles and the clustering of nano-ZrO2 reinforcement particles. The brittle-ductile fracture occurred in the Al–ZrO2 nanocomposites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Interdisciplinary Division of Materials Science and Engineering, Ege University, Izmir 35040, Turkey

Department of Mechanical Engineering, Ege University, Izmir 35040, Turkey

References (72)

Show source-provided references
1. 50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities10.1007/s40962-019-00375-4 ↗
2. Influence of Texture Evolution on Mechanical and Damping Properties of SiC/Li2ZrO3/Al Composite Through Friction Stir Processing10.1115/1.4045495 ↗
3. Mechanical and Physical Characterization of Mg-TiO2 and Mg-ZrO2 Nanocomposites Produced by Hot-Pressing10.1016/j.matchemphys.2020.122844 ↗
4. An Investigation of the Synthesis, Consolidation and Mechanical Behaviour of Al6061 Nanocomposites Reinforced by TiC Via Mechanical Alloying10.1016/j.matdes.2013.12.067 ↗
5. Metal Matrix Composite Brake Rotors: Historical Development and Product Life Cycle Analysis10.15282/ijame.4.2011.8.0038 ↗
6. A Review on Conventional and Nonconventional Machining of SiC Particle-Reinforced Aluminium Matrix Composites10.1007/s40436-020-00313-2 ↗
7. A Detailed Study on Zirconium and its Applications in Manufacturing Process With Combinations of Other Metals, Oxides and Alloys—A Review10.1016/j.matpr.2019.08.130 ↗
8. Characterization of AA7068-ZrO2 Reinforced Metal Matrix Composites10.1016/j.matpr.2017.02.196 ↗
9. A Review on Tribological and Mechanical Properties of Al Alloy Composites10.1016/j.matpr.2019.09.032 ↗
10. Corrosion Behavior of AZ31-WC Nano-Composites10.1016/j.jma.2019.07.004 ↗
11. Developments in the Aluminum Metal Matrix Composites Reinforced by Micro/Nano Particles—A Review10.1177/0021998319865307 ↗
12. Microstructure and Wear Behavior of AA6061/SiC Surface Composite Fabricated Via Friction Stir Processing With Different Pins and Passes10.1007/s12598-016-0691-x ↗
13. Effect of SiC Particle Size on the Physical and Mechanical Properties of Extruded Al Matrix Nanocomposites10.1016/j.matdes.2013.08.049 ↗
14. Structural Evolution During Mechanical Milling of Nanometric and Micrometric Al2O3 Reinforced Al Matrix Composites10.1016/j.msea.2006.04.116 ↗
15. Consideration of Orowan Strengthening Effect in Particulate-Reinforced Metal Matrix Nanocomposites: A Model for Predicting Their Yield Strength10.1016/j.scriptamat.2005.12.017 ↗
16. Metal Matrix Composites Reinforced by Nano-Particles—A Review10.3390/met4010065 ↗
17. Effects of Particle Size on Inhibited Grain Growth10.1016/0956-716X(90)90574-Z ↗
18. Effect of Hot Isostatic Pressing on Densification, Microstructure and Nanoindentation Behaviour of Mg–SiC Nanocomposites10.1007/s10853-020-04758-5 ↗
19. Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano-Sized Particles10.1002/adem.201701089 ↗
20. The Structural and Mechanical Properties of Al-2.5%wt. B4C Metal Matrix Nano Composite Fabricated by Mechanical Alloying
21. Impact of Volume Fraction and Size of Reinforcement Particles on the Grain Size in Metal-Matrix Micro and Nanocomposites10.1007/s11661-014-2358-2 ↗
22. Development and Strengthening Mechanisms of Bulk Ultrafine Grained AA6063/SiC Composite Sheets With Varying Reinforcement Size Ranging From Nano to Micro Domain10.1016/j.jallcom.2018.06.306 ↗
23. Effect of Reinforcement Volume Fraction on Mechanical Alloying of Al–SiC Nanocomposite Powders10.1179/174329007X189621 ↗
24. Effect of Particle Size on the Microstructures and Mechanical Properties of SiC-Reinforced Pure Aluminum Composites10.1007/s11665-010-9801-3 ↗
25. A Review on the Production of Metal Matrix Composites Through Stir Casting—Furnace Design, Properties, Challenges, and Research Opportunities10.1016/j.jmapro.2019.04.017 ↗
26. Liquid State Methods of Producing Metal Matrix Composites: A Review Article
27. Critical Review on Liquid State Processing of Aluminium Based Metal Matrix Nano-Composites10.1016/j.matpr.2019.07.642 ↗
28. Conventional Stir Casting Versus Ultrasonic Assisted Stir Casting Process: Mechanical and Physical Characteristics of AMCs10.1016/j.jallcom.2019.07.076 ↗
29. Enhanced Machinability of SiC-Reinforced Metal-Matrix Composite With Hybrid Turning10.1016/j.jmatprotec.2019.01.017 ↗
30. Ceschini · 201710.1007/978-981-10-2681-2 ↗
31. Preparation of 6061Al-Al2O3 MMCs by Stir Casting and Evaluation of Mechanical and Wear Properties10.1016/j.mspro.2014.07.151 ↗
32. Conventional and Additive Manufacturing With Metal Matrix Composite: A Perspective10.1016/j.promfg.2019.02.023 ↗
33. Review on Nano Particle Reinforced Al Metal Matrix Composites
34. Synthesis and Characterization of High Volume Fraction Al–Al2O3 Nanocomposite Powders by High-Energy Milling10.1016/j.msea.2006.03.066 ↗
35. Effect of ZrO2 Content on Properties of Cu-ZrO2 Nanocomposites Synthesized by Optimized High Energy Ball Milling10.1016/j.ceramint.2018.10.147 ↗
36. Effect of Intermetallic Compound on the Al-Mg Composite Materials Fabricated by Mechanical Ball Milling and Spark Plasma Sintering10.1016/j.jallcom.2017.12.054 ↗
37. Synthesis of Nanocrystalline Mg-Based Mg–Ti Composite Powders by Mechanical Milling10.1016/j.matchar.2015.05.021 ↗
38. Mechanical Alloying by Ball Milling of Ti and Mg Elemental Powders: Operation Condition Considerations10.1016/j.jallcom.2009.11.184 ↗
39. Influence of Particle Size and Spatial Distribution of B4C Reinforcement on the Microstructure and Mechanical Behavior of Precipitation Strengthened Al Alloy Matrix Composites10.1016/j.msea.2016.08.062 ↗
40. Effect of Al2O3 Particles on Mechanical and Tribological Properties of Al–Mg Dual Matrix Nanocomposites10.1016/j.ceramint.2019.11.028 ↗
41. Investigating the Influence of ZnO, CuO, Al2O3 Reinforcing Nanoparticles on Strength and Wearing Properties of Aluminum Matrix Nanocomposites Produced by Powder Metallurgy Process10.1088/2053-1591/ab3613 ↗
42. Effect of High Energy Ball Milling on the Morphology, Microstructure and Properties of Nano-Sized TiC Particle-Reinforced 6005 Aluminium Alloy Matrix Composite10.1016/j.powtec.2017.07.089 ↗
43. Production and Mechanical Properties of Nano SiC Particle Reinforced Ti−6Al−4V Matrix Composite10.1016/S1003-6326(17)60009-8 ↗
44. Characterisation and Milling Time Optimisation of Nanocrystalline Aluminium Powder for Selective Laser Melting10.1007/s00170-016-8866-z ↗
45. Kaufman · 2018 · 3110.31399/asm.hb.v02a.a0006505 ↗
46. Lattice Parameters and Density for Y2O3-Stabilized ZrO210.1111/j.1151-2916.1986.tb04741.x ↗
47. Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen
48. Shashanka · 2017
49. Gaffet · 2008 · 455
50. Densification Mechanism, Elastic-Plastic Deformations and Stress–Strain Relations of Compacted Metal-Ceramic Powder Mixtures (Review)10.1515/bsmm-2018-0001 ↗
51. Fabrication of Al/A206–Al2O3 Nano/Micro Composite by Combining Ball Milling and Stir Casting Technology10.1016/j.matdes.2013.01.032 ↗
52. Effect of Milling Time on XRD Phases and Microstructure of a Novel Al67Cu20Fe10B3 Quasicrystalline Alloy10.1088/2053-1591/ab9b37 ↗
53. Nano and Hybrid Aluminum Based Metal Matrix Composites: An Overview10.1051/mfreview/2015018 ↗
54. Plasticity and Microstructure of A356 Matrix Nano Composites10.1016/j.jksues.2011.11.001 ↗
55. Suryanarayana · 2013 · 4210.1533/9780857098900.1.42 ↗
56. The Effect of Grain Size on the Mechanical Properties of Aluminum10.1515/amm-2015-0115 ↗
57. The Hall–Petch and Inverse Hall–Petch Relations and the Hardness of Nanocrystalline Metals10.1007/s10853-019-04160-w ↗
58. Size Dependence of Elastic Mechanical Properties of Nanocrystalline Aluminum10.1016/j.msea.2017.03.065 ↗
59. Effect of Matrix/Reinforcement Particle Size Ratio (PSR) on the Mechanical Properties of Extruded Al–SiC Composites10.1007/s00170-014-5901-9 ↗
60. The Effect of Matrix to Reinforcement Particle Size Ratio (PSR) on the Microstructure and Mechanical Properties of a P/M Processed AlCuMn/SiCp MMC10.1016/j.msea.2004.04.040 ↗
61. Cracking Evolution Behaviors of Lightweight Materials Based on In Situ Synchrotron X-Ray Tomography: A Review10.1007/s11465-018-0481-2 ↗
62. The Effects of Mechanical Alloying on the Compressibility of Aluminium Matrix Composite Powder10.1016/S0921-5093(03)00057-1 ↗
63. Temperature Effect on Mechanical and Tribological Characterization of Mg–SiC Nanocomposite Fabricated by High Rate Compaction10.1088/2053-1591/aaa4e5 ↗
64. An Investigation on the Compressibility of Aluminum/Nano-Alumina Composite Powder Prepared by Blending and Mechanical Milling10.1016/j.msea.2006.11.129 ↗
65. Investigation of Microstructure of Aluminum Based Composite Material Obtained by Mechanical Alloying10.1007/s12540-019-00583-x ↗
66. The Effect of Process Parameters in Aluminum Metal Matrix Composites With Powder Metallurgy10.1051/mfreview/2018001 ↗
67. Contribution of Orowan Strengthening Effect in Particulate-Reinforced Metal Matrix Nanocomposites10.1016/j.msea.2006.10.184 ↗
68. Mechanical Behavior of Particle Reinforced Metal Matrix Composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
69. Mechanical Performance of Particulate-Reinforced Al Metal-Matrix Composites (MMCs) and Al Metal-Matrix Nano-Composites (MMNCs)10.1007/s10853-017-1378-x ↗
70. Effects of Particulate Agglomerated Degree on Deformation Behaviors and Mechanical Properties of In-Situ ZrB2 Nanoparticles Reinforced AA6016 Matrix Composites by Finite Element Modeling10.1088/2053-1591/ab7b27 ↗
71. Reinforcement Size Dependence of Mechanical Properties and Strengthening Mechanisms in Diamond Reinforced Titanium Metal Matrix Composites10.1016/j.compositesb.2018.12.014 ↗
72. Size Dependent Strengthening in Particle Reinforced Aluminum10.1016/S1359-6454(01)00327-5 ↗