journal article·2024-04-01

Evaluation of the Fracture Toughness of Short Carbon Fiber Reinforced Thermoplastic Composites

Jianfeng Shi, Xinwei Zong, Weili Jiang, Riwu Yao, Jinyang Zheng

Publisher page

Abstract

Abstract Short carbon fiber (SCF) reinforced thermoplastic composites (SCFRTCs) are attracting broad attention in various fields for their excellent mechanical properties. The fracture toughness, an essential characteristic of the resistance of materials to crack propagation, is considered a critical aspect of the long-term performance of SCFRTCs structures. The fracture toughness of SCFRTCs depends on two competing mechanisms: the interface between SCFs and polymer matrix may promote crack initiation, while the SCFs hinder the crack propagation. In this study, the fracture toughness of SCFRTCs with varying SCFs volume fractions is first determined by a three-point bending test. The results show that adding SCFs effectively improves the fracture toughness of SCFRTCs, and an increase of up to 73.7% at the SCFs volume fraction of 5.45 vol%. In addition, it is found that heat treatment and its temperature have no effect on the fracture toughness of SCFRTCs. Subsequently, the full-field strain around the crack tip is analyzed by digital image correlation (DIC), and the strain level significantly decreases after adding SCFs. The fracture surface of the SCFRTCs specimen is much rougher compared with HDPE, and obvious bridging SCFs are observed, which make it to absorb more energy for fracture, thus explaining the toughening mechanism of SCFs on SCFRTCs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Smart Materials for Construction · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Zhejiang University Institute of Process Equipment;, Engineering Research Center of High Pressure Process Equipment and Safety, MOE, , Hangzhou 310027 , China ;

Donghai Laboratory of Zhejiang Province Marine Green Resources Research Center, , Zhoushan 316021 , China

Zhejiang University Institute of Process Equipment Zhejiang University, , Hangzhou 310027 , China

Technical University of Munich Chair of Carbon Composites, , Garching bei München 85748 , Germany

Zhejiang University College of Mechanical Engineering, , Hangzhou 310027 , China

Zhejiang University Institute of Process Equipment;, Engineering Research Center of High Pressure Process Equipment and Safety, MOE;, State Key Laboratory of Fluid Power Transmission and Control, , Hangzhou 310027 , China

Funding

National Natural Science Foundation of China · Shandong Province

References (44)

Show source-provided references
1. Internal Arcing and Lightning Strike Damage in Short Carbon Fiber Reinforced Thermoplastic Composites10.1016/j.compscitech.2020.108525 ↗
2. Development of Efficient Short/Continuous Fiber Thermoplastic Composite Automobile Suspension Upper Control Arm10.1016/j.matpr.2020.03.543 ↗
3. Hybridization Effect of Fibers on Mechanical Properties of PA66/PP Blend-Based Thermoplastic Composites10.1007/s42114-018-0049-y ↗
4. Lauke · 2009
5. Significance of the Type of Reinforcement on the Physicomechanical Behavior of Short Glass Fiber and Short Carbon Fiber-Reinforced Polypropylene Composites
6. Effect of Short Carbon Fiber Content and Water Absorption on Tensile and Impact Properties of PA6/PP Blend Based Composites10.1002/pc.25784 ↗
7. Studies on the Morphological, Rheological, Electrical, Mechanical and Thermal Properties of the PTT/SCF Composites10.1177/0892705709355229 ↗
8. Fatigue Behavior of Short Carbon Fiber Reinforced Epoxy Composites10.1016/j.compositesb.2018.11.035 ↗
9. Fatigue Design of Highly Loaded Short-Glass-Fibre Reinforced Polyamide Parts in Engine Compartments10.1016/j.ijfatigue.2007.08.017 ↗
10. Fatigue Failure of Short Glass Fibre Reinforced PA 6.6 Structural Pieces for Railway Track Fasteners10.1016/j.engfailanal.2005.01.016 ↗
11. Fatigue Strength of a Clutch Pedal Made of Reprocessed Short Glass Fibre Reinforced Polyamide10.1016/j.ijfatigue.2009.02.001 ↗
12. Slurry Pot Erosion Wear of Nanoclay Modified Short Fiber Reinforced Polymer (SFRP) Composites10.35940/ijeat.A3013.109119 ↗
13. Mechanical Enhancement and Strain Sensing of Electrofusion Joint With Carbon Fiber-Reinforced Polyethylene10.1115/PVP2019-93347 ↗
14. Viscoelastic Mechanical Characterization of a Short-Fiber Reinforced Polyethylene Tube: Experiments and Modelling10.1016/j.ijpvp.2015.08.007 ↗
15. Design of Short Fiber-Reinforced Thermoplastic Composites: A Review10.1002/pc.26817 ↗
16. Fracture Toughness Improvement of Epoxy Resins With Short Carbon Fibers10.1016/j.jiec.2013.06.053 ↗
17. Multi-scale Toughening of Epoxy Composites Via Electric Field Alignment of Carbon Nanofibres and Short Carbon Fibres10.1016/j.compscitech.2018.07.034 ↗
18. Interfacial Performance and Fracture Patterns of 3D Printed Continuous Carbon Fiber With Sizing Reinforced PA6 Composites10.1016/j.compositesa.2018.09.001 ↗
19. Mode I Interlaminar Fracture Toughness of CFRP Laminates Reinforced With Short Aramid Fibers10.1080/01694243.2020.1777924 ↗
20. Study on Properties of Interlayer Short Fiber Reinforced Carbon Fiber/Epoxy Composite Laminates10.1088/1742-6596/1215/1/012040 ↗
21. On the Fracture Toughness of PPS and PPA Reinforced With Glass Fiber10.1016/j.prostr.2022.05.073 ↗
22. Synergistic Effect on the Fracture Toughness of Hybrid Short Glass Fiber and Short Carbon Fiber Reinforced Polypropylene Composites10.1016/S0921-5093(01)01383-1 ↗
23. Predictions of the Axial Tensile Property of the Unidirectional Composite Influenced by Microfiber Breakage Defects10.1177/00405175211034247 ↗
24. Effect of Atmospheric-Pressure Plasma Treatments on Fracture Toughness of Carbon Fibers-Reinforced Composites10.3390/molecules26123698 ↗
25. Enhancement of Surface Adhesion Between Carbon Fiber and Thermoplastic Using Polymer Colloid Dispersed in n-Butanol10.1016/j.rinma.2022.100322 ↗
26. Optimization of Interfacial Bonding Properties Between Thermoplastic Liners and Carbon Fiber-Reinforced Composites by Atmospheric-Pressure Plasma and Failure Mechanism Study10.1002/pc.27249 ↗
27. Combined Effect of Fiber Content and Microstructure on the Fracture Toughness of SGF and SCF Reinforced Polypropylene Composites10.1023/A:1016045820715 ↗
28. Efficient Toughening of Short-Fiber Composites Using Weak Magnetic Fields10.3390/ma13102415 ↗
29. Microstructural Efficiency and Fracture Toughness of Short Fiber/Thermoplastic Matrix Composites10.1016/0266-3538(85)90090-9 ↗
30. The Toughness of a Composite Containing Short Brittle Fibres10.1007/BF01154590 ↗
31. Determination of Fibre Tension Fracture Toughness of Composite Laminates at High Loading Rate10.1016/j.compscitech.2022.109619 ↗
32. Fracture Toughness Testing Using Photogrammetry and Digital Image Correlation10.1016/j.mex.2018.09.012 ↗
33. Investigation of Multiple Cracking Behavior of Cement-Based Fiber Composites by Digital Image Correlation Method
34. Long-Term Open-Hole Tensile Creep Properties of Self-Reinforced PET Composites Measured by Digital Image Correlation10.1016/j.matchemphys.2021.125633 ↗
35. ASTM · 2010
36. ASTM · 2007
37. Toughness of HDPE/CaCO3 Microcomposites Prepared From Masterbatch by Melt Blend Method10.1002/app.34417 ↗
38. Thermo-Mechanical, Wear and Fracture Behavior of High-Density Polyethylene/Hydroxyapatite Nano Composite for Biomedical Applications: Effect of Accelerated Ageing10.1016/j.jmst.2013.03.020 ↗
39. Evaluation of Fracture Toughness Behavior of Polyethylene Pipe Materials10.1115/1.4029925 ↗
40. Effect of Fibre Concentration and Strain Rate on Mechanical Properties of Single-Gated and Double-Gated Injection-Moulded Short Glass Fibre-Reinforced Polypropylene Copolymer Composites10.1007/s10853-009-3458-z ↗
41. Mechanical and Tribological Behavior of Clay–Polypropylene Nanocomposites10.1007/s10853-008-2938-x ↗
42. Time and Temperature Effects on the Fracture Toughness of Rigid Poly (vinylch1oride) Pipe Materials10.1002/pen.760221307 ↗
43. Poly (Vinyl Chloride)/CaCO3 Nanocomposites: Influence of Surface Treatments on the Properties10.1002/app.34770 ↗
44. Pyroresistive Properties of Composites Based on HDPE and Carbon Fillers10.3390/polym15092105 ↗