journal article·2024-04-01

Effect of Post-Deposition Heat Treatment on the Mechanical Behavior and Deformation Mechanisms of a Solid-State Additively Manufactured Al–Mg–Si Alloy

B. A. Rutherford, D. Z. Avery, B. J. Phillips, N. Zhu, S. C. Beck, L. N. Brewer, P. G. Allison, J. B. Jordon

Publisher page

Abstract

Abstract The effects of post-deposition heat treatment on the fatigue behavior of AA6061 processed by additive friction stir deposition (AFSD) were investigated for the first time in this work. A heat treatment to recover the T6 temper was performed on AFSD AA6061 is then subjected to strain-controlled fatigue and monotonic tension testing. Microstructural analysis revealed abnormal grain growth resulting in bimodal grain size distribution. Mechanical testing indicated a full recovery of the strength of the AA6061-T6 temper with comparable fatigue performance to the as-deposited AFSD AA6061. Fractography revealed deformation mechanisms in the post-deposition heat treatment not observed in the as-deposited samples, however, the fatigue resistance remained unchanged. A microstructure-sensitive fatigue model was implemented to capture the effects of the heat treatment process on the fatigue performance of the post-deposition heat-treated AFSD AA6061.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

U.S. Army Engineer Research and Development Center Geotechnical and Structures Lab, , Vicksburg, MS 39180

U.S. Army Combat Capabilities Development Command Aviation and Missile Center Systems Readiness Directorate, Aviation Manufacturing Technology, , Redstone Arsenal, AL 35898

Baylor University Point-of-Need Innovations (PONI) Center, , Waco, TX 76704

University of Alabama Department of Mechanical Engineering, , Tuscaloosa, AL 35487

University of Alabama Department of Metallurgical and Materials Engineering, , Tuscaloosa, AL 35487

Funding

U.S. Department of Defense

References (53)

Show source-provided references
1. Davis · 1993
2. Fulcher · 2014 · 404
3. Processing and Characterization of Crack-Free Aluminum 6061 Using High-Temperature Heating in Laser Powder Bed Fusion Additive Manufacturing10.1016/J.ADDMA.2018.05.047 ↗
4. A Novel Processing Approach for Additive Manufacturing of Commercial Aluminum Alloys10.1016/J.PHPRO.2016.08.095 ↗
5. Cross · 2005 · 310.1007/3-540-27460-X_1 ↗
6. Microstructures and Mechanical Behavior of Inconel 625 Fabricated by Solid-State Additive Manufacturing10.1016/J.MSEA.2017.03.105 ↗
7. Microstructure-Deformation Relationship of Additive Friction Stir-Deposition Al-Mg-Si10.1016/J.MTLA.2019.100387 ↗
8. Non-Beam-Based Metal Additive Manufacturing Enabled by Additive Friction Stir Deposition10.1016/J.SCRIPTAMAT.2018.03.025 ↗
9. Influence of Texture and Grain Refinement on the Mechanical Behavior of AA2219 Fabricated by High Shear Solid State Material Deposition10.1016/J.MSEA.2018.03.088 ↗
10. Fatigue Behavior of Solid-State Additive Manufactured Inconel 62510.1007/s11837-018-3114-7 ↗
11. McClelland · 2019 · 27710.1007/978-3-030-05789-3_41 ↗
12. A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD10.1007/s11665-018-3649-3 ↗
13. Friction Stir-Based Additive Manufacturing10.1080/13621718.2022.2027663 ↗
14. Elucidating the Effect of Additive Friction Stir Deposition on the Resulting Microstructure and Mechanical Properties of Magnesium Alloy We4310.3390/MET11111739 ↗
15. Effect of Thermomechanical Processing on Fatigue Behavior in Solid-State Additive Manufacturing of Al-Mg-Si Alloy10.3390/met10070947 ↗
16. The Effect of Anodization on the Mechanical Properties of AA6061 Produced by Additive Friction Stir-Deposition10.3390/met11111773 ↗
17. Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy10.1007/s11661-020-05746-9 ↗
18. Nanostructure Evolution in AA7075 Alloy Produced by Solid State Additive Manufacturing-Additive Friction Stir-Deposition10.1017/S1431927621010783 ↗
19. Evaluation of Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy Repaired Via Additive Friction Stir Deposition10.1115/1.4052816 ↗
20. Processing-Structure-Property Correlation in Additive Friction Stir Deposited Ti-6Al-4V Alloy From Recycled Metal Chips10.1016/J.ADDMA.2021.102259 ↗
21. Solid-State Additive Manufacturing of Aluminum and Copper Using Additive Friction Stir Deposition: Process-Microstructure Linkages10.1016/J.MTLA.2020.100967 ↗
22. Tracing Plastic Deformation Path and Concurrent Grain Refinement During Additive Friction Stir Deposition10.1016/J.MTLA.2021.101159 ↗
23. Morphological and Microstructural Investigation of the Non-Planar Interface Formed in Solid-State Metal Additive Manufacturing by Additive Friction Stir Deposition10.1016/j.addma.2020.101293 ↗
24. Potentials and Strategies of Solid-State Additive Friction-Stir Manufacturing Technology: A Critical Review10.1016/j.jmapro.2018.09.030 ↗
25. Elucidating the Influence of Temperature and Strain Rate on the Mechanics of AFS-D Through a Combined Experimental and Computational Approach10.1016/j.jmatprotec.2022.117593 ↗
26. Analysis of Crack Propagation Resistance of Al–Al2O3 Particulate-Reinforced Composite Friction Stir Welded Butt Joints10.1016/J.IJFATIGUE.2008.05.003 ↗
27. Microstructure and Low-Cycle Fatigue of a Friction-Stir-Welded 6061 Aluminum Alloy10.1007/s11661-010-0279-2 ↗
28. Fatigue Properties of Friction Stir Welded Particulate Reinforced Aluminium Matrix Composites10.1016/j.ijfatigue.2009.02.018 ↗
29. Friction Stir Welding and Processing10.1016/J.MSER.2005.07.001 ↗
30. Friction Stir Welding of Aluminium Alloys10.1179/174328009X411136 ↗
31. Microstructural Investigation of Friction Stir Welded 7050-T651 Aluminium10.1016/S1359-6454(02)00449-4 ↗
32. Precipitation in Aluminum Alloys AA6111 and AA601610.1016/S1359-6462(99)00204-3 ↗
33. The Effect of Solutionizing and Artificial Aging on the Microstructure and Mechanical Properties in Solid-State Additive Manufacturing of Precipitation Hardened Al–Mg–Si Alloy10.1016/J.MSEA.2021.141351 ↗
34. Handbook Committee
35. ASTM E2627—13 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
36. A Parametric Investigation on Friction Stir Welding of Al-Li 209910.1080/10426914.2020.1765249 ↗
37. Overview on Microstructure- and Defect-Sensitive Fatigue Modeling of Additively Manufactured Materials10.1007/s11837-018-2987-9 ↗
38. Microstructure-Based Fatigue Modeling of Cast A356-T6 Alloy10.1016/S0013-7944(02)00021-8 ↗
39. Microstructure-Based Multistage Fatigue Modeling of Aluminum Alloy 7075-T65110.1016/j.engfracmech.2006.12.031 ↗
40. Micromechanics Study of Fatigue Damage Incubation Following an Initial Overstrain10.1115/1.4000227 ↗
41. Fatigue Characterization and Modeling of Friction Stir Spot Welds in Magnesium AZ31 Alloy10.1115/1.4002330 ↗
42. Identification and Modeling of Fatigue Crack Growth Mechanisms in a Die-Cast AM50 Magnesium Alloy10.1016/j.actamat.2006.06.039 ↗
43. Fatigue Behavior and Modeling of Additively Manufactured Ti-6Al-4V Including Interlayer Time Interval Effects10.1007/s11837-017-2625-y ↗
44. Fatigue Crack Nucleation and Small Crack Growth in an Extruded 6061 Aluminum Alloy10.1016/j.ijfatigue.2018.09.023 ↗
45. Stephens · 2000
46. Abnormal Grain Growth in Friction Stir Processed Alloys10.1016/j.scriptamat.2007.09.052 ↗
47. Effect of Friction Stir Processing on Microstructure and Tensile Properties of an Investment Cast Al-7Si-0.6Mg Alloy10.1007/s11661-010-0324-1 ↗
48. Influences of Post-Weld Heat Treatment on Tensile Properties of Friction Stir-Welded AA6061 Aluminum Alloy Joints10.1016/j.matchar.2007.09.006 ↗
49. Investigation Into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates With Different Temper Conditions10.1007/s11661-013-2026-y ↗
50. Optimization of Processing-Microstructure-Properties Relationship in Friction-Stir Welded 6061-T6 Aluminum Alloy10.1016/j.msea.2016.03.063 ↗
51. Effect of Pre and Post Welding Heat Treatment in SiC-Fortified Dissimilar AA6061-AA2024 FSW Butt Joint10.1016/j.jmapro.2017.08.014 ↗
52. Effect of Pre-Strain Path on Suppression of Abnormal Grain Growth in Friction-Stir Welded 6061 Aluminum Alloy10.1016/j.msea.2019.05.118 ↗
53. A Unified Theory of Recovery, Recrystallization and Grain Growth, Based on the Stability and Growth of Cellular Microstructures—I. The Basic Model10.1016/S1359-6454(97)00070-0 ↗