Mechanical Evaluation of Hydroxyapatite Nanocomposites Using Finite Element Modeling
Source abstract
Abstract
Hydroxyapatite (HA) has been proposed as a candidate material for bone implants because of its similarity to the inorganic phase in bone. However, due to its lower mechanical properties compared to bone, it has not been used in load bearing bone implants. Inclusion of second phase reinforcements in HA such as carbon nanotubes (CNT) and graphene nanosheets is expected to significantly improve its mechanical properties. In this study, a computational framework that will improve the understanding of the mechanical behavior of graphene nanosheet and CNT-reinforced HA-nanocomposites is proposed. The variation of elastic modulus of HA-nanocomposites is assessed based on the nanofiller type, volume fraction, alignment, area, thickness, and aspect ratio using the finite element modeling. The results of the simulations show that graphene nanosheets are more effective in improving the elastic modulus of nanocomposites than CNTs at similar volume fractions. HA-nanocomposites reinforced by graphene nanosheets exhibit transversely isotropic material properties and provide the highest elastic modulus when aligned along a direction or randomly distributed in a plane, whereas CNTs provide the best reinforcement when aligned along an axis. Variation in graphene nanosheet area, thickness, aspect ratio, and carbon nanotube length have negligible effect on elastic modulus of the HA-nanocomposite. In addition, comparison between the finite element simulations and theoretical calculations show that clustering of nanoinclusions reduces the effectiveness of the reinforcement they provide. The simulation results and the computational framework presented in this study are expected to help in determining the best design and manufacturing parameters that can be adapted for developing HA-nanocomposite bone implant materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Graphene and Nanomaterials Applications · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
e-mail: Department of Mechanical Engineering Villanova University 800 Lancaster Avenue Villanova, PA 19085
References (32)
Show source-provided references
1. Preparation, Microstructure and Mechanical Properties of Polycrystalline Hydroxyapatite10.1007/BF02396876 ↗
2. Bioceramics: From Concept to Clinic10.1111/j.1151-2916.1991.tb07132.x ↗
3. Hydroxyapatite-Carbon Nanotube Composites for Biomedical Applications: A Review10.1111/j.1744-7402.2007.02113.x ↗
4. Hydroxyapatite Toughened by Silver Inclusions10.1177/002199803036242 ↗
5. Carbon Nanotube Reinforced Hydroxyapatite Composite Coatings Produced Through Laser Surface Alloying10.1016/j.carbon.2005.07.011 ↗
6. Laminated and Functionally Graded Hydroxyapatite/Yttria Stabilized Tetragonal Zirconia Composites Fabricated by Spark Plasma Sintering10.1016/S0142-9612(02)00381-2 ↗
7. Development of Carbon Nanofiber Reinforced Hydroxyapatite With Enhanced Mechanical Properties10.1016/j.compositesa.2006.01.006 ↗
8. Carbon Nanotube Toughened Hydroxyapatite by Spark Plasma Sintering: Microstructural Evolution and Multi-Scale Tribological Properties10.1016/j.carbon.2010.04.047 ↗
9. Fabrication and Properties of Carbon Nanotubes Reinforced Fe/Hydroxyapatite Composites by In Situ Chemical Vapor Deposition10.1016/j.compositesa.2008.04.007 ↗
10. Fabrication and Characterization of Needle-Like Nano-HA and HA/MWNT Composites
11. In Situ Polymerization Into Porous Ceramics: A Novel Route to Tough Biomimetic Materials
12. Study of the Toughening Mechanisms in Bone and Biomimetic Hydroxyapatite Materials Using Raman Microprobe Spectroscopy
13. Novel in Site Synthesis of MWNTS-Hyadoxyapatite Composites10.1016/j.carbon.2003.10.024 ↗
14. Functionalized Graphene Sheets for Polymer Nanocomposites10.1038/nnano.2008.96 ↗
15. Fracture and Fatigue in Graphene Nanocomposites10.1002/smll.200901480 ↗
16. Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content10.1021/nn9010472 ↗
17. Modeling of Ceramic Particles Filled Polymer-Matrix Nanocomposites
18. Effects of Nanotube Waviness on the Modulus of Nanotube-Reinforced Polymers10.1063/1.1487900 ↗
19. Modelling Stiffness of Polymer/Clay Nanocomposites10.1016/j.polymer.2006.11.062 ↗
20. Modeling the Influence of Interphase on the Elastic Properties of Carbon Nanotube Composites
21. Multiscale Modeling of Carbon Nanotube Reinforced Polymers10.1166/jnn.2003.233 ↗
22. Evaluations of the Effective Material Properties of Carbon Nanotube-Based Composites Using a Nanoscale Representative Volume10.1016/S0167-6636(02)00200-4 ↗
23. Effects of the Distribution and Geometry of Carbon Nanotubes on the Macroscopic Stiffness and Microscopic Stresses of Nanocomposites10.1016/j.compscitech.2007.05.005 ↗
24. Nanoreinforced Polymer Composites: 3D FEM Modeling With Effective Interface Concept10.1016/j.compscitech.2011.03.003 ↗
25. Influence of Constituent Properties and Microstructural Parameters on the Tensile Modulus of a Polymer/Clay Nanocomposite10.1016/j.compscitech.2004.06.002 ↗
26. Multiscale Micromechanical Modeling of Polymer/Clay Nanocomposites and the Effective Clay Particle10.1016/j.polymer.2003.10.100 ↗
27. Structure-Property Relationships in Nanocomposites10.1016/j.polymer.2007.09.025 ↗
28. Micromechanics Prediction of the Effective Elastic Moduli of Graphene Sheet-Reinforced Polymer Nanocomposites10.1088/0965-0393/18/4/045005 ↗
29. Reinforcing Efficiency of Nanoparticles: A Simple Comparison for Polymer Nanocomposites10.1016/j.compscitech.2007.10.033 ↗
30. The Effect of Nanotube Waviness and Agglomeration on the Elastic Property of Carbon Nanotube-Reinforced Composites10.1115/1.1751182 ↗
31. Prediction of the Overall Moduli of Layered Silicate-Reinforced Nanocomposites—Part I: Basic Theory and Formulas
32. Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene10.1126/science.1157996 ↗