journal article·2024-07-01

Investigation of the Mechanical Characteristics of Metal 3D Printing at Different Build Orientation and Directions

Khalil Khanafer, Joon Soo Park, Abdelkrem Eltaggaz, Yasser Aboelkassem

Publisher page

Abstract

Abstract In this paper, metal 3D printing technology was used to investigate the effects of build orientation angles and direction on the mechanical characteristics of 316L stainless steel produced by the Bound Metal Deposition (BMD) process. Several orientation angles (0 deg, 45 deg, and 90 deg) of the test specimens were made for both horizontal and vertical build directions. The tensile testing apparatus was used on metal 3D-printed samples to determine their mechanical characteristics, such as Young's modulus, elongation at break, and ultimate strength. Brinell hardness tester was also used to compare the hardness of 3D-printed samples to the original native material. In addition, the porosity and microstructure of the printed samples were analyzed in this study. The findings of this investigation revealed how, in comparison to the original material, the mechanical properties of the metal 3D-printed material rely on the raster orientation and build type. The experimental results demonstrate that the 3D-printed parts using the BMD process have comparable ultimate tensile strength and elongation at break compared to the original material for 0 deg orientation and horizontal build direction. The elongation at break was found to depend strongly on the build direction for 45 deg and 90 deg printing orientation. Further, Young's modulus was found to be much lower than the original material using the BMD process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Michigan-Flint Division of Engineering Technology, College of Innovation and Technology, , Flint, MI 48502

University of Guelph Department of Mechanical Engineering, , Guelph, ON, N1G 2W1 , Canada

References (32)

Show source-provided references
1. Self-Propelled 3D-Printed Aircraft Carrier of Light-Powered Smart Micromachines for Large-Volume Nitroaromatic Explosives Removal
2. 3D Biomimetic Artificial Bone Scaffolds With Dual-Cytokines Spatiotemporal Delivery for Large Weight-Bearing Bone Defect Repair10.1038/s41598-016-0028-x ↗
3. 3D-Printed Sensors: Current Progress and Future Challenges10.1016/j.sna.2020.111916 ↗
4. 3-D-Printed z-Axis Accelerometers With Differential Capacitive Sensing10.1109/JSEN.2017.2768299 ↗
5. 3D Printed Personalized Titanium Plates Improve Clinical Outcome in Microwave Ablation of Bone Tumors Around the Knee10.1038/s41598-017-07243-3 ↗
6. Progress and Challenges in Fabrication of Wearable Sensors for Health Monitoring10.1016/j.sna.2020.112105 ↗
7. A Review of Mechanical Properties of Additively Manufactured Inconel 71810.1016/j.addma.2019.100877 ↗
8. Thermal Post-Processing of 4140 Alloy Steel Parts Fabricated by Selective Laser Melting (SLM)
9. Characterization of 3D-Printed PLA Parts With Different Raster Orientations and Printing Speeds10.1038/s41598-022-05005-4 ↗
10. Investigation of Tensile Properties of Different Infill Pattern Structures of 3D-Printed PLA Polymers: Analysis and Validation Using Finite Element Analysis in ANSYS10.3390/ma15155142 ↗
11. Influence of Infill Density and Orientation on the Mechanical Response of PLA+ Specimens Produced Using FDM 3D Printing
12. Investigating the Influence of Infill Percentage on the Mechanical Properties of Fused Deposition Modelled ABS Parts10.15446/ing.investig.v36n3.56610 ↗
13. Characteristics of Mechanical Properties and Microstructure for 316L Austenitic Stainless Steel10.1016/S1006-706X(11)60117-9 ↗
14. Novak · 1977
15. Atlas Steels · 2010
16. Honeycombe · 1995
17. Evaluation of Inter-Granular Corrosion Susceptibility in 316LN Austenitic Stainless Steel Weldments10.1016/j.fusengdes.2018.05.078 ↗
18. Mechanical Properties of 3D Printed Metals10.13111/2066-8201.2021.13.1.13 ↗
19. Comparison Between Mechanical Properties and Structures of a Rolled and a 3D-Printed Stainless Steel10.3390/ma12233867 ↗
20. Laser Directed Energy Deposition of AISI 316L Stainless Steel: The Effect of Build Direction on Mechanical Properties in As-Built and Heat-Treated Conditions10.1016/j.aime.2022.100079 ↗
21. Study on Microstructure, Mechanical Properties and Machinability of Efficiently Additive Manufactured AISI 316L Stainless Steel by High-Power Direct Laser Deposition10.1016/j.jmatprotec.2016.09.005 ↗
22. Comparison of Stainless Steel 316L Parts Made by FDM- and SLM-Based Additive Manufacturing Processes10.1007/s11837-018-3207-3 ↗
23. Process Porosity and Mechanical Performance of Fused Filament Fabricated 316L Stainless Steel10.1108/RPJ-01-2019-0002 ↗
24. On Hot Isostatic Pressing Sintering of Fused Filament Fabricated 316L Stainless Steel–Evaluation of Microstructure, Porosity, and Tensile Properties10.1016/j.matlet.2021.129854 ↗
25. Solid State Sintered 3D Printing Component by Using Inkjet (Binder) Method10.2497/jjspm.63.421 ↗
26. The Influence of MIM and Sintering-Process Parameters on the Mechanical Properties of 316l SS
27. Fabrication Process and Basic Material Properties of the BASF Ultrafuse 316lx Material10.17973/MMSJ.2020_12_2020071 ↗
28. Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting10.1002/masy.202000275 ↗
29. Effects of Process Time Interval and Heat Treatment on the Mechanical and Microstructural Properties of Direct Laser Deposited 316L Stainless Steel10.1016/j.msea.2015.07.056 ↗
30. Hardened Austenite Steel With Columnar Sub-Grain Structure Formed by Laser Melting10.1016/j.msea.2014.12.018 ↗
31. Investigation on Porosity and Microhardness of 316L Stainless Steel Fabricated by Selective Laser Melting10.3390/met7020064 ↗
32. Study of Mechanical Properties of AISI 316 Stainless Steel Processed by ‘Selective Laser Melting’, Following Different Manufacturing Strategies10.1007/s00170-010-2631-5 ↗