journal article·2017-10-01

Investigation on Microstructure and Martensitic Transformation Mechanism for the Warm-Stamped Third-Generation Automotive Medium-Mn Steel

Xiaodong Li, Ying Chang, Cunyu Wang, Shuo Han, Daxin Ren, Ping Hu, Han Dong

Publisher page

Abstract

With the development of the automotive industry, the application of the high-strength steel (HSS) becomes an effective way to improve the lightweight and safety. In this paper, the third-generation automotive medium-Mn steel (TAMM steel) is studied. The warm-stamped TAMM steel holds the complete and fine-grained martensitic microstructure without decarbonization layer, which contributes to high and well-balanced mechanical properties. Furthermore, the martensitic transformation mechanism of the TAMM steel is investigated by the dilatation tests. The results indicate that the effects of the loading method on the Ms temperature under different loads are different. The Ms temperature is hardly influenced under the tensile loads and low compressive load. However, it is slightly decreased under the high compressive load. Moreover, the effects of the strain and strain rate on the Ms temperature are insignificant and can be neglected. As a result, this research proves that the martensitic transformation of the TAMM steel is rarely influenced by the process parameters, such as stamping temperature, loading method, load, strain, and strain rate. The actual stamping process can be designed and controlled accurately referring to the continuous cooling transformation (CCT) curves to realize the required properties and improve the formability of the automotive part.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, No. 2, Linggong Road, Dalian 116024, China

School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, No. 2, Linggong Road, Dalian 116024, China e-mail:

Central Iron & Steel Research Institute (CISRI), Beijing 100081, China

Funding

National Natural Science Foundation of China · China Postdoctoral Science Foundation · Natural Science Foundation of Liaoning Province

References (23)

Show source-provided references
1. First and Third Generations of Advanced High-Strength Steels in a FeCrNiBSi System10.1016/j.jmatprotec.2016.07.043 ↗
2. The Effect of Initial Microstructure on the Final Properties of Press Hardened 22MnB5 Steels10.1016/j.msea.2016.08.096 ↗
3. Internal-Friction Analysis of Dislocation-Interstitial Carbon Interactions in Press-Hardened 22MnB5 Steel10.1016/j.msea.2015.05.055 ↗
4. Modelling of Austenite Formation During Heating in Boron Steel Hot Stamping Processes10.1016/j.jmatprotec.2016.06.006 ↗
5. A Study on the Multi-Phase Transformation Kinetics of Ultra-High-Strength Steel and Application in Thermal-Mechanical-Phase Coupling Simulation of Hot Stamping Process10.1016/j.msea.2016.07.010 ↗
6. A Review on Hot Stamping10.1016/j.jmatprotec.2010.07.019 ↗
7. The Effects of Non-Isothermal Deformation on Martensitic Transformation in 22MnB5 Steel10.1016/j.msea.2007.10.057 ↗
8. Influence of Stress on Martensitic Transformation and Mechanical Properties of Hot Stamped AHSS Parts10.1016/j.msea.2015.01.056 ↗
9. Description of Microstructures and Mechanical Properties of Boron Alloy Steel in Hot Stamping Process10.1016/j.jmapro.2015.11.008 ↗
10. 2011
11. Enhanced Word-Hardening Behavior and Mechanical Properties in Ultrafine-Grained Steels With Large-Fractioned Metastable Austenite10.1016/j.scriptamat.2010.06.023 ↗
12. Microstructure and Performance Control Technology of the 3rd Generation Auto Sheet Steels
13. Method of Hardening Hypereutectoid Steels
14. Effect of Deformation Temperature on Microstructure and Hardness of a Low Carbon Alloyed Steel Treated by Quenching and Partitioning Process
15. Experimental and Numerical Analysis of Influence of Carbide on Austenitisation Kinetics in 5Mn TRIP Steel10.1179/1743284713Y.0410090447 ↗
16. Introduction to a Third Generation Automobile Steel and Its Optimal Warm-Stamping Process
17. An Introduction to Medium-Mn Steel: Metallurgy, Mechanical Properties and Warm Stamping Process10.1016/j.matdes.2016.01.048 ↗
18. Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature
19. Comparison of the Hot-Stamped Boron-Alloyed Steel and the Warm-Stamped Medium-Mn Steel on Microstructure and Mechanical Properties10.1016/j.msea.2016.10.045 ↗
20. 1996
21. A General Equation Prescribing the Extent of the Austenite-Martensite Transformation in Pure Iron-Carbon Alloys and Plain Carbon Steels10.1016/0001-6160(59)90170-1 ↗
22. The Deformation of Metals Under Small Stresses During Phase Transformation10.1098/rspa.1965.0029 ↗
23. Ma, N., 2011, “Research on Hot Forming of High Strength Steel,” Doctoral thesis, Dalian University of Technology, Dalian, China.