journal article·2018-07-01

Finite Element Analysis of Origami-Based Sheet Metal Folding Process

Muhammad Ali Ablat, Ala Qattawi

Publisher page

Abstract

Origami-based sheet metal (OSM) folding is a novel approach regarded as extension of the origami technique to sheet metal. It requires creating numerous features along the bend line, called material discontinuities (MD). Material discontinuities control the material deformation and result in reduced bending force (BF), minimal tooling, and machinery requirements. Despite the promising potential of OSM, there is little understating of the effect of the selected MD shape and geometry on the final workpiece. Specifically, this is of interest when comparing the manufacturing energy and cost allocations for OSM with a well-establish process for sheet metal such as stamping. In this work, wiping die bending of aluminum sheet with different MD shapes and geometries along the bend line is investigated using finite element analysis (FEA) and compared to traditional sheet bending in terms of stress distribution along the bending line, required bending force and springback. The FEA results are validated by comparing it to the available empirical models in terms of bending forces. This study found that OSM technique reduced the required bending force significantly, which has important significance in energy and cost reduction. The study also found each MD resulted with different bending force and localized stress. Hence, MD are ranked in terms of the required force to bend the same sheet metal type and thickness for further future investigation. Springback is decreased due to application of MD. Meanwhile, MD generated localized high stress regions along the bending line, which may affect load-bearing capability of the final part.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Advanced Materials and Mechanics · Laser and Thermal Forming Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University of California, Merced, Merced, CA 95343 e-mail:

Funding

Hellman Foundation

References (33)

Show source-provided references
1. An Experimental Study on the Examination of Springback of Sheet Metals With Several Thicknesses and Properties in Bending Dies10.1016/j.jmatprotec.2003.07.005 ↗
2. Effect of Tool Temperature on the Reduction of the Springback of Aluminum Sheets10.1016/S0924-0136(02)00925-1 ↗
3. Finite Element Investigation on Parameters Influencing the Springback During Sheet Metal Forming
4. 2010
5. Qattawi, A., Venhovens, P. J., and Brooks, J., 2014, “Rethinking Automotive Engineering Education—Deep Orange as a Collaborative Innovation Framework for Project-Based Learning Incorporating Real-World Case Studies,” 121st ASEE Annual Conference and Exposition, Indianapolis, IN, June 15–18, pp. 1–28.
6. Design Considerations of Flat Patterns Analysis Techniques When Applied for Folding 3D Sheet Metal Geometries10.1007/s10845-012-0679-9 ↗
7. Extending Origami Technique to Fold Forming of Sheet Metal
8. Tachi, T., 2009, “Generalization of Rigid Foldable Quadrilateral Mesh Origami,” International Association for Shell and Spatial Structures Symposium (IASS), Valencia, Spain, Sept. 28–Oct. 2, pp. 173–179.http://origami.c.u-tokyo.ac.jp/~tachi/cg/RigidFoldableQuadMeshOrigami_tachi_IASS2009.pdf
9. Rigid-Foldable Thick Origami
10. A Solution for Folding Rigid Tall Shopping Bags10.1098/rspa.2011.0120 ↗
11. An Approach to Designing Origami-Adapted Aerospace Mechanisms10.1115/1.4032973 ↗
12. Qattawi, A., Abdelhamid, M., Mayyas, A., and Omar, M., 2014, “Design Analysis for Origami-Based Folded Sheet Metal Parts,” SAE Int. J. Mater. Manf., 7(2), pp. 488–49810.4271/2014-01-9098.10.4271/2014-01-9098 ↗
13. Application of a Novel Metal Folding Technology for Automotive BiW Design10.4271/2013-01-0373 ↗
14. Method of Bending Sheet Metal to Form Three-Dimensional Structures
15. Precision-Folded, High Strength, Fatigue-Resistant Structures and Sheet Therefor
16. 2010
17. Finite Element Analysis of Origami-Based Sheet Metal Folding Process10.1115/IMECE2016-67324 ↗
18. An Incremental Complete Solution of the Stretch-Forming and Deep-Drawing of a Circular Blank Using a Hemispherical Punch10.1016/0020-7403(76)90071-0 ↗
19. A Finite Element Analysis of Rigid-Plastic Deformation of the Flange in a Deep-Drawing Process Based on a Fourth-Degree Yield Function10.1016/0020-7403(78)90032-2 ↗
20. Analysis of Sheet Metal Stamping by a Finite-Element Method10.1115/1.3424276 ↗
21. 2010
22. Sheet Metal Forming Simulation in Industry10.1016/0924-0136(96)02303-5 ↗
23. State-of-the-Art of Simulation of Sheet Metal Forming10.1016/S0924-0136(00)00413-1 ↗
24. Overview—Simulation of Sheet Metal Forming10.1063/1.2011187 ↗
25. Advances in Sheet Forming—Materials Modeling, Numerical Simulation, and Press Technologies10.1115/1.4005117 ↗
26. A Review on Finite Element Simulations in Metal Forming
27. Advance in FEM Simulation and Its Related Technologies in Sheet Metal Forming10.1016/S0007-8506(07)63246-6 ↗
28. Numerical Simulation of Sheet Metal Forming: A Review10.1007/s00170-016-9103-5 ↗
29. NUMISTAMP: A Research Project for Assessment of Finite-Element Models for Stamping Processes10.1016/0924-0136(94)01367-A ↗
30. Comparative Investigation Into Implicit, Explicit, and Iterative Implicit/Explicit Schemes for the Simulation of Sheet-Metal Forming Processes10.1016/0924-0136(94)01368-B ↗
31. Simulation of Springback: Through-Thickness Integration10.1016/j.ijplas.2006.04.005 ↗
32. 2004
33. Prediction of Springback in Sheet Metal Components With Holes on the Bending Area, Using Experiments, Finite Element and Neural Networks10.1016/j.matdes.2011.11.039 ↗