Ratcheting Prediction at the Notch Root of Steel Samples Over Asymmetric Loading Cycles
Source abstract
Abstract
Abstract The present study intends to evaluate local ratcheting and stress relaxation of medium carbon steel samples under various asymmetric load levels by means of two kinematic hardening rules of Chaboche (CH) and Ahmadzadeh-Varvani (A-V). The Neuber's rule was coupled with the hardening rules to predict ratcheting and stress relaxation at the vicinity of the notch root. Stress-strain hysteresis loops generated by the CH and A-V models were employed to simultaneously control ratcheting progress over stress cycles and stress relaxation at notch root while strain range kept constant in each cycle. The higher cyclic load levels applied at the notch root accelerated shakedown over smaller number of cycles and resulted in lower relaxation rate. The larger notch diameter of 9 mm on the other hand induced lower stress concentration and smaller plastic zone at the notch root promoting ratcheting progress with less materials constraint over loading cycles compared with notch diameter d = 3 mm. Predicted ratcheting results through the A-V and CH models as coupled with the Neuber's rule were found in good agreements with the experimental data. The choice of the A-V and CH hardening rules in assessing ratcheting of materials was attributed to the number of terms/coefficients and complexity of their frameworks and computational time/central processing unit (CPU) required to run a ratcheting program.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Industrial Engineering, Ryerson University, 350 Victoria Street, Toronto, ON, M5B 2K3, Canada
Funding
Natural Sciences and Engineering Research Council (NSERC) of Canada
References (36)
Show source-provided references
1. Ratcheting in Pressurized Pipes and Equipment: A Review on Affecting Parameters, Modelling, Safety Codes, and Challenges10.1111/ffe.12775 ↗
2. Morrow · 1959 · 8310.1520/STP39312S ↗
3. Jhansale · 1973 · 246
4. The Effect of Low Cycle Fatigue, Ratcheting and Mean Stress Relaxation on Stress–Strain Response and Microstructural Development in a Dual Phase Steel10.1016/j.ijfatigue.2015.06.003 ↗
5. Landgraf · 1970 · 310.1520/STP26837S ↗
6. Evaluation of Residual Stress Relaxation and its Effect on Fatigue Strength of AISI 316L Stainless Steel Ground Surfaces: Experimental and Numerical Approaches10.1016/j.ijfatigue.2012.10.008 ↗
7. Transient and Steady-State Deformation at Notch Root Under Cyclic Loading10.1016/S0167-6636(98)00048-9 ↗
8. Analysis of Uniaxial Ratcheting Behavior and Cyclic Mean Stress Relaxation of a Duplex Stainless Steel10.1016/j.ijplas.2014.06.008 ↗
9. Calculations for Uniaxial Stress and Strain Cycling in Plasticity10.1115/1.3167662 ↗
10. Modeling and Characterization of Cyclic Relaxation and Ratcheting Using the Distributed-Element Model10.1016/j.apm.2007.01.002 ↗
11. Modeling Mean Stress Relaxation in Variable Amplitude Loading for 7075-T6511 and 7249-T76511 High Strength Aluminum Alloys10.1016/j.ijfatigue.2011.10.016 ↗
12. Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel at High Temperatures10.1016/S1006-706X(07)60012-0 ↗
13. Smooth Specimen Simulation of the Fatigue Behavior of Notches
14. Stadnick · 1972 · 22910.1520/STP34686S ↗
15. Endochronic Analysis of Cyclic Elastoplastic Strain Fields in a Notched Plate10.1115/1.3167147 ↗
16. A Micro/Macroscopic Analysis for Cyclic Plasticity of Dual-Phase Materials10.1115/1.2789139 ↗
17. Hu · 1999
18. Advanced Cyclic Plasticity Models in Simulating Ratcheting Responses of Straight and Elbow Piping Components, and Notched Plates
19. Influence of Notch Geometry on the Notch Vicinity Stress and Strain Responses10.1115/PVP2016-63287 ↗
20. Ratcheting Assessment of Notched Steel Samples Subjected to Asymmetric Loading Cycles Through Coupled Kinematic Hardening-Neuber Rules10.1016/j.ijmecsci.2018.05.034 ↗
21. Ratcheting Progress at Notch Root of 1045 Steel Samples Over Asymmetric Loading Cycles: Experiments and Analyses10.1111/ffe.12827 ↗
22. Theory of Stress Concentration for Shear-Strained Prismatical Bodies With Arbitrary Nonlinear Stress-Strain Law10.1115/1.3641780 ↗
23. Ratcheting Assessment of Materials Based on the Modified Armstrong–Frederick Hardening Rule at Various Uniaxial Stress Levels10.1111/ffe.12059 ↗
24. A Comparative Study in Descriptions of Coupled Kinematic Hardening Rules and Ratcheting Assessment Over Asymmetric Stress Cycles10.1111/ffe.12549 ↗
25. On Some Modifications of Kinematic Hardening to Improve the Description of Ratcheting Effects10.1016/0749-6419(91)90050-9 ↗
26. Time-Independent Constitutive Theories for Cyclic Plasticity10.1016/0749-6419(86)90010-0 ↗
27. Khan · 1995
28. A Mathematical Representation of the Multiaxial Bauschinger Effect
29. On the Calibration of the Chaboche Hardening Model and a Modified Hardening Rule for Uniaxial Ratcheting Prediction10.1016/j.ijsolstr.2009.04.002 ↗
30. Ratcheting Assessment of Steel Alloys Under Step-Loading Conditions10.1016/j.matdes.2013.04.047 ↗
31. A Kinematic Hardening Rule to Investigate the Impact of Loading Path and Direction on Ratcheting Response of Steel Alloys10.1016/j.mechmat.2016.07.010 ↗
32. Cyclic Hardening Properties of Hard-Drawn Copper and Rail Steel10.1016/0022-5096(89)90024-0 ↗
33. Cyclic Creep Process in AISI316L Stainless Steel in Terms of Dislocation Patterns and Internal Stresses10.1016/j.actamat.2004.03.011 ↗
34. Description of Stress-Strain Curves by Three Parameters
35. MATLAB · 2018
36. Concurrent Ratcheting and Stress Relaxation at the Notch Root of Steel Samples Undergoing Asymmetric Tensile Loading Cycles10.1111/ffe.12996 ↗