Uniaxial Ratcheting Assessment of 304 Stainless Steel Samples Undergoing Step-Loading Conditions at Room and Elevated Temperatures
Source abstract
Abstract
Abstract The present study evaluates ratcheting response of 304 stainless steel samples subjected to various step-loading conditions at room and elevated temperatures using the kinematic hardening rules of Ohno–Wang (O–W), AbdelKarim–Ohno (AK–O), and Ahmadzadeh–Varvani (A–V). The hardening rules were employed along with the visco-plastic flow rule to account for the time-dependent response of 304 stainless steel samples. Ratcheting over low–high–low loading sequences consistently showed a small drop in ratcheting strain over the third loading step. This is mainly due to plastic strain accumulation over the first two loading steps preventing ratcheting strain to drop significantly with a drop in the mean stress. Moreover, dynamic recovery terms in these models were further modified through the inclusion of an exponential function developed by Kang to address the dynamic strain aging phenomenon. Low ratcheting rate and shakedown shortly after a few stress cycles within loading steps as operating temperatures varied between 400 and 600 °C were attributed to dynamic strain aging phenomenon in SS304 steel alloy. Progressive ratcheting response and their stress–strain hysteresis loops were highly influenced at various operating temperatures, stress levels, and stress rates. Coefficients in the dynamic recovery term of the A–V model controlled ratcheting progress and hysteresis loops agreeable with those of experimental data over consecutive loading steps. Choices of material constants and the number of segments defined from stress–strain curve based on the O–W and AK–O models noticeably influenced the ratcheting response of steel samples. Predicted ratcheting values by means of the A–V, O–W, and AK–O models were discussed and compared with those of the experimental data.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Industrial Engineering, Ryerson University, 350 Victoria Street, Toronto, ON M5B 2K3, Canada
Funding
Natural Sciences and Engineering Research Council of Canada
References (53)
Show source-provided references
1. Ratcheting in Pressurized Pipes and Equipment: A Review on Affecting Parameters, Modelling, Safety Codes, and Challenges10.1111/ffe.12775 ↗
2. Thermal Ratcheting With Kinematic Hardening in a Two-Bar Assembly With Unequal Areas and Properties10.1115/1.3443376 ↗
3. Uniaxial Ratchetting of 316fr Steel at Room Temperature-Part I: Experiments10.1115/1.482761 ↗
4. Time-Dependent Ratcheting of 35CrMo Structural Steel at Elevated Temperature Considering Stress Rates10.1080/09603409.2016.1261511 ↗
5. Rate-Dependent Low Cycle Fatigue and Ratcheting of 25Cr2MoVA Steel Under Cyclic Pulsating Tension10.1080/09603409.2017.1386922 ↗
6. Visco-Plastic Constitutive Modeling on Ohno–Wang Kinematic Hardening Rule for Uniaxial Ratcheting Behavior of Z2CND18. 12N Steel10.1016/j.ijplas.2011.06.001 ↗
7. Micromechanical Modeling of the Ratcheting Behavior of 304 Stainless Steel10.1115/1.4032154 ↗
8. Uniaxial and Biaxial Creep-Ratcheting Behavior of SUS304 Stainless Steel at Room Temperature10.1016/0308-0161(90)90130-A ↗
9. The Influence of Test Temperature on the Ratchetting Behavior of Type 304 Stainless Steel10.1115/1.3226483 ↗
10. Time-Dependent Ratchetting Experiments of SS304 Stainless Steel10.1016/j.ijplas.2005.05.006 ↗
11. The Tensile and Low-Cycle Fatigue Behavior of Cold Worked 316L Stainless Steel: Influence of Dynamic Strain Aging10.1016/j.ijfatigue.2003.12.002 ↗
12. Effect of Mean Stress and Stress Amplitude on the Ratcheting Behaviour of 316LN Stainless Steel Under Dynamic Strain Aging Regime10.3184/096034012X13493571408802 ↗
13. Thermo-Viscoplastic Modeling Incorporating Dynamic Strain Aging Effect on the Uniaxial Behavior of Z2CND18. 12N Stainless Steel10.1016/j.ijplas.2012.05.001 ↗
14. Mechanistic Modeling of Dynamic Strain Aging in Austenitic Stainless Steels10.1016/S1044-5803(98)00031-X ↗
15. Serrated Plastic Flow10.1007/BF02743993 ↗
16. Current Theoretical Approaches to Collective Behavior of Dislocations10.1016/j.physrep.2006.10.003 ↗
17. Time-Independent Constitutive Theories for Cyclic Plasticity10.1016/0749-6419(86)90010-0 ↗
18. Isotropic Viscoplasticity Theory Based on Overstress (VBO). The Influence of the Direction of the Dynamic Recovery Term in the Growth Law of the Equilibrium Stress10.1016/S0749-6419(98)80002-8 ↗
19. A Nonlinear Kinematic Hardening Theory for Cyclic Thermoplasticity and Thermoviscoplasticity10.1016/0749-6419(92)90024-7 ↗
20. A Constitutive Model of Cyclic Viscoplasticity Considering Changes in Subsequent Viscoplastic Deformation Due to the Evolution of Dislocation Structures10.1016/j.ijplas.2006.10.003 ↗
21. Viscoplastic Constitutive Modelling of the Ratchetting Behavior of 35CrMo Steel Under Cyclic Uniaxial Tensile Loading With a Wide Range of Stress Amplitude10.1016/j.euromechsol.2019.04.009 ↗
22. Kinematic Hardening Rules With Critical State of Dynamic Recovery, Part I: Formulation and Basic Features for Ratchetting Behavior10.1016/0749-6419(93)90042-O ↗
23. High Temperature Creep and Cyclic Deformation Behaviour of AISI 316 L(N) Austenitic Steel and Its Modelling With Unified Constitutive Equations10.1016/0029-5493(95)01139-0 ↗
24. Uniaxial Ratcheting and Fatigue Failure of Tempered 42CrMo Steel: Damage Evolution and Damage-Coupled Visco-Plastic Constitutive Model10.1016/j.ijplas.2008.06.004 ↗
25. An Updated Version of the Multimechanism Model for Cyclic Plasticity10.1016/j.ijplas.2009.11.002 ↗
26. On the Modelling of Strain Ageing in a Metastable Austenitic Stainless Steel10.1016/j.jmatprotec.2011.08.003 ↗
27. Extension of the Viscoplasticity Theory Based on Overstress (VBO) to Capture Non-Standard Rate Dependence in Solids10.1016/S0749-6419(01)00011-0 ↗
28. A Simplified Phenomenological Model for Non-Elastic Deformation: Predictions of Pure Aluminum Behavior and Incorporation of Solute Strengthening Effects10.1016/0001-6160(78)90129-3 ↗
29. Uniaxial Ratcheting of Ss316L Stainless Steel At High Temperature : Experiments and Simulations
30. Kinematic Hardening Model Suitable for Ratchetting With Steady-State10.1016/S0749-6419(99)00052-2 ↗
31. Uniaxial Ratcheting of SS304 Stainless Steel at High Temperatures: Visco-Plastic Constitutive Model10.1016/S0167-8442(03)00038-7 ↗
32. The Constitutive Equation for Work-Hardening and Rate Sensitive Plastic Materials
33. Cyclic Deformation of 316L Stainless Steel and Constitutive Modeling Under Non-Proportional Variable Loading Path10.1016/j.ijplas.2019.04.016 ↗
34. Goodall · 1981 · 10310.1007/978-3-642-81598-0_6 ↗
35. Isotropic-Kinematic Hardening Framework to Assess Ratcheting Response of Steel Samples Undergoing Asymmetric Loading Cycles10.1111/ffe.12905 ↗
36. Ratcheting Assessment of Visco-Plastic Alloys at Ambient Temperature by Means of the AV and OW Hardening Rule Frameworks10.1016/j.mechmat.2019.01.007 ↗
37. Ratcheting Assessment of 304 Steel Samples by Means of Two Kinematic Hardening Rules Coupled With Isotropic Hardening Descriptions10.1016/j.ijmecsci.2018.09.045 ↗
38. Time-Dependent Ratcheting Assessment of Steel Samples Undergoing Multi-Step Loading Cycles Through Use of Hardening Rules10.1016/j.mtcomm.2019.100682 ↗
39. Experimental Study on the Cyclic Deformation and Plastic Flow of U71Mn Rail Steel10.1016/S0020-7403(02)00062-0 ↗
40. Constitutive Model for Uniaxial Time-Dependent Ratcheting of 6061-T6 Aluminum Alloy10.1016/j.commatsci.2011.06.015 ↗
41. A Visco–Plastic Constitutive Model Incorporated With Cyclic Hardening for Uniaxial/Multiaxial Ratcheting of SS304 Stainless Steel at Room Temperature10.1016/S0167-6636(02)00153-9 ↗
42. Chaboche, J. L., Van, K. D., and Cordier, G., 1979, “Modelization of the Strain Memory Effect on the Cyclic Hardening of 316 Stainless Steel.” Technical Report L11/3, p. 1–10.
43. Constitutive Modeling of Cyclic Plasticity With Emphasis on Ratchetting10.1016/S0020-7403(97)00053-2 ↗
44. Ratcheting Assessment of Materials Based on the Modified Armstrong–Frederick Hardening Rule at Various Uniaxial Stress Levels10.1111/ffe.12059 ↗
45. A Comparative Study in Descriptions of Coupled Kinematic Hardening Rules and Ratcheting Assessment Over Asymmetric Stress Cycles10.1111/ffe.12549 ↗
46. Visco-Plastic Ratcheting Response of Materials Undergoing Step-Loading Conditions With Various Cyclic Stress Levels10.1007/s11665-020-04628-w ↗
47. Experimental Study on Uniaxial and Nonproportionally Multiaxial Ratcheting of SS304 Stainless Steel at Room and High Temperatures10.1016/S0029-5493(02)00062-6 ↗
48. Non-Proportionally Multiaxial Ratcheting of Cyclic Hardening Materials at Elevated Temperatures: Experiments and Simulations10.1016/j.mechmat.2005.01.006 ↗
49. Recent Topics in Constitutiwe Modeling of Cyclic Plasticity and Viscoplasticity10.1115/1.3119155 ↗
50. Application of Viscoplasticity Theory Based on Overstress (VBO) to High Temperature Cyclic Deformation of 316FR Steel10.1299/jsmea.41.539 ↗
51. A Viscoplastic Constitutive Model Incorporating Dynamic Strain Aging Effect During Cyclic Deformation Conditions10.1016/S0749-6419(99)00053-4 ↗
52. Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relations10.1115/1.2823355 ↗
53. On the Ohno-Wang Kinematic Hardening Rules for Multiaxial Ratcheting Modeling of Medium Carbon Steel10.1016/j.ijplas.2004.05.005 ↗