journal article·2012-01-01

Large Strain Mechanical Behavior of HSLA-100 Steel Over a Wide Range of Strain Rates

Maen Alkhader, Laurence Bodelot

Publisher page

Abstract

High-strength low alloy steels (HSLA) have been designed to replace high-yield (HY) strength steels in naval applications involving impact loading as the latter, which contain more carbon, require complicated welding processes. The critical role of HSLA-100 steel requires achieving an accurate understanding of its behavior under dynamic loading. Accordingly, in this paper, we experimentally investigate its behavior, establish a model for its constitutive response at high-strain rates, and discuss its dynamic failure mode. The large strain and high-strain-rate mechanical constitutive behavior of high strength low alloy steel HSLA-100 is experimentally characterized over a wide range of strain rates, ranging from 10−3 s−1 to 104 s−1. The ability of HSLA-100 steel to store energy of cold work in adiabatic conditions is assessed through the direct measurement of the fraction of plastic energy converted into heat. The susceptibility of HSLA-100 steel to failure due to the formation and development of adiabatic shear bands (ASB) is investigated from two perspectives, the well-accepted failure strain criterion and the newly suggested plastic energy criterion [1]. Our experimental results show that HSLA-100 steel has apparent strain rate sensitivity at rates exceeding 3000 s−1 and has minimal ability to store energy of cold work at high deformation rate. In addition, both strain based and energy based failure criteria are effective in describing the propensity of HSLA-100 steel to dynamic failure (adiabatic shear band). Finally, we use the experimental results to determine constants for a Johnson-Cook model describing the constitutive response of HSLA-100. The implementation of this model in a commercial finite element code gives predictions capturing properly the observed experimental behavior. High-strain rate, thermomechanical processes, constitutive behavior, failure, finite elements, Kolsky bar, HSLA-100.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Aerospace Laboratories, California Institute of Technology, 1200 E. California Boulevard, Pasadena, CA 91125-5000; Mechanical Engineering Department, Stony Brook University, Stony Brook, NY 11794-2300

Graduate Aerospace Laboratories, California Institute of Technology, 1200 E. California Boulevard, Pasadena, CA 91125-5000

References (29)

Show source-provided references
1. Adiabatic Shear Band Failure and Dynamic Stored Energy of Cold Work10.1103/PhysRevLett.96.075502 ↗
2. Microstructural Model for Hot Strip Rolling of High-Strength Low-Alloy Steels10.1007/s11661-000-0120-4 ↗
3. Microhardness Variations in HSLA-100 Welds Fabricated With New Ultra-Low-Carbon Weld Consumables
4. The Effect of Variation of Microstructure on Fracture Mechanics Parameters of HSLA-100 Steel10.1016/j.msea.2006.05.093 ↗
5. Influence of Thermomechanical Treatments on the Microstructure and Mechanical Properties of HSLA-100 Steel Plates10.1007/s11661-003-0326-3 ↗
6. Effect of Cooling Rate on the as-Quenched Microstructure and Mechanical Properties of HSLA-100 Steel Plates10.1007/s11661-003-0009-0 ↗
7. Constitutive Response of Welded HSLA 100 Steel10.1016/S0921-5093(03)00007-8 ↗
8. Damage Accumulation and Failure of HSLA-100 Steel10.1016/j.msea.2003.08.040 ↗
9. Bai
10. On the Measurement of Local Strain and Temperature During the Formation of Adiabatic Shear Bands10.1016/0921-5093(92)90026-W ↗
11. Measurement of the Temperature Profile During Shear Band Formation in Steels Deforming at High Strain Rates10.1016/0022-5096(87)90009-3 ↗
12. Conditions for Shear Banding and Material Instability in Finite Elastoplastic Deformation10.1016/0749-6419(89)90013-2 ↗
13. Shear and Tensile Plastic Behavior of Austenitic Steel TRIP-120 Compared With Martensistic Steel HSLA-10010.1007/s10704-010-9472-y ↗
14. A Shear-Compression Specimen for Large Strain Testing10.1007/BF02411052 ↗
15. Numerical Validation of the Shear Compression Specimen. Part 1: Quasi-Static Large Strain Testing10.1007/BF02428190 ↗
16. Numerical Validation of the Shear Compression Specimen. Part 2: Dynamic Large Strain Testing10.1007/BF02428191 ↗
17. Large Strain Mechanical Behavior of 1018 Cold-Rolled Steel Over a Wide Range of Strain Rates10.1007/s11661-003-0188-8 ↗
18. Geometrical Imperfection and Adiabatic Shear Banding10.1016/j.ijimpeng.2007.07.009 ↗
19. Stress Wave Experiments in Plasticity10.1016/0749-6419(85)90016-6 ↗
20. An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading10.1088/0370-1301/62/11/302 ↗
21. On the Conversion of Plastic Work Into Heat
22. Thermomechanical Characterization of Pure Polycrystalline Tantalum10.1016/j.msea.2006.10.064 ↗
23. Large Strain Constitutive Behavior of OFHC Copper Over a Wide Range of Strain Rates Using the Shear Compression Specimen10.1016/S0167-6636(02)00164-3 ↗
25. Dynamic Hardness Measurements Using a Dropped Ball: With Application to 1018 Steel10.1016/S0921-5093(03)00499-4 ↗
26. “A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures,”
27. A Plastic Constitutive Equation Incorporating Strain, Strain-Rate and Temperature10.1016/j.ijplas.2010.02.005 ↗
28. High Strain Rate Properties of Metals and Alloys10.1179/174328008X277795 ↗
29. “A Definition of Stable Inelastic Material,”