Nonlinear Stress–Strain Characterization of Cast Iron Used to Manufacture Pipes for Water Supply
Source abstract
Abstract
The stress–strain response of cast iron under tension or compression is nonlinear. This paper examines how the hyperbolic constitutive law can be applied to characterize nonlinear stress–strain behavior of cast iron used in water supply networks. Procedures are described to obtain parameters of the hyperbolic constitutive law from either the response (data) obtained from simple uniaxial tensile and compressive tests or from bending tests. To demonstrate its applicability, this hyperbolic constitutive law is first applied to data obtained from uniaxial tensile and compressive tests conducted by Schlick and Moore (1936, “Strength and Elastic Properties of Cast Iron in Tension, Compression, Flexure, and Combined Tension and Flexure,” Bulletin 127, Iowa Engineering Experiment Station, Ames, IA). In addition, an approach to extract parameters for the hyperbolic constitutive law from bending (beam and pipe rings) tests is proposed and subsequently applied to tests conducted by Talbot (1908, “Tests of Cast-Iron and Reinforced Concrete Culvert Pipe,” Bulletin No. 22, University of Illinois, Urbana, IL). This latter approach is attractive for practical purposes because the test set up is simple and the test coupons are very easy to prepare. The hyperbolic constitutive law in conjunction with maximum normal strain theory as proposed by St. Venant (Collins, J. A., 1993, Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, John Wiley, New York, NY) was also used to predict failure loads.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Underground Structures · Numerical methods in engineering · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Principal Rajani Consultants, Inc., 2024 Glenfern Avenue Ottawa, ON, K1J 6G8, Canada e-mail:
References (21)
Show source-provided references
1. The History of US Pipe & Foundry Co.—A Centennial Celebration
2. Supporting Strength of Cast Iron Pipe for Gas and Water Services
3. Cast-Iron-Strength, Resilience, Tests and Specifications
4. Some Considerations Regarding Cast Iron and Steel Pipes
5. On the Mechanics of Grey Cast Iron Under Pure Bending10.1115/1.3225851 ↗
6. Mechanical Behavior of Spun-Cast Gray Iron Pipe10.1061/(ASCE)0899-1561(2007)19:10(826) ↗
7. 1978 · 542
8. 1986
9. Strength and Elastic Properties of Cast Iron in Tension, Compression, Flexure, and Combined Tension and Flexure
10. Tests of Cast-Iron and Reinforced Concrete Culvert Pipe
11. American Recommended Practice. Manual for the Computation of Strength and Thickness of Cast Iron Pipe
12. Response of Jointed Cast Iron Pipelines to Parallel Trench Construction
13. The Effect of Corrosion Pitting on Circumferential Failures in Grey Cast Iron Pipes
14. Hyperbolic Stress–Strain Response: Cohesive Soils10.1061/JSFEAQ.0000479 ↗
15. A Statistical Theory of the Strength of Materials
16. Uniaxial Stress–Strain Curves From a Bending Test10.1007/BF02326357 ↗
17. Uber den Zusammenhang der Biegungselastizitat des Gusseisens mit seiner Zug- and Druckelastizitat
18. Measuring Hydro-Static Dependent Constitutive Behaviour of Adhesives Using a Bend Specimen10.1080/00218469308044648 ↗
19. Derivation of Uniaxial Stress–Strain Curves for Cast Iron From Samples Tested in Flexure
20. Inverse Calculation of Uniaxial Stress–Strain Curves From Bending Test Data10.1115/1.3120409 ↗
21. 1993