journal article·2009-10-01

Inverse Calculation of Uniaxial Stress-Strain Curves From Bending Test Data

G. S. Schajer, Y. An

Publisher page

Abstract

Uniaxial tension and compression stress-strain curves are simultaneously evaluated from load and surface strain data measured during a bending test. The required calculations for the uniaxial results are expressed as integral equations and solved in that form using inverse methods. This approach is taken to reduce the extreme numerical sensitivity of calculations based on equations expressed in differential form. The inverse solution method presented addresses the numerical sensitivity issue by using Tikhonov regularization. The use of a priori information is explored as a means of further stabilizing the stress-strain curve evaluation. The characteristics of the inverse solution are investigated using experimental data from bending and uniaxial tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Structural Health Monitoring Techniques · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fellow ASME

Department of Mechanical Engineering, University of British Columbia, Vancouver, V6T 1Z4 Canada

References (12)

Show source-provided references
1. Über den Zusammenhang der Biegungselastizatät des Gusseisens mit seiner Zug- und Druckelastizatät” (On the Connection Between the Bending Deformation of Cast Iron With Its Tension and Compression Deformation)
2. Nadai · 165
3. Marin · 97
4. Uniaxial Stress-Strain Curves From a Bending Test10.1007/BF02326357 ↗
5. Derivation of the Tensile Stress-Strain Curve From Bending Data10.1007/BF01033845 ↗
6. A Method for the Simultaneous Derivation of Tensile and Compressive Behaviour of Materials Under Bauschinger Effect Using Bend Tests10.1243/09544054JEM275 ↗
9. Dahlquist
10. Hole-Drilling Residual Stress Profiling With Automated Smoothing10.1115/1.2744416 ↗
11. Boyer
12. Upper Yield Point: Occurrence in Bending Tests and Signification10.1038/160399a0 ↗