journal article·2015-04-01

High Temperature Flow Behavior and Microstructure of Al-Cu/Mg2Si Metal Matrix Composite

A. H. Shafieizad, A. Zarei-Hanzaki, M. Ghambari, A. Abbasi-Bani

Publisher page

Abstract

The present work deals with the high temperature flow behavior and the microstructure of the Al-Cu/Mg2Si metal matrix composite. Toward this end, a set of hot compression tests was performed in a wide range of temperature (573–773 K) and strain rate (0.001–0.1 s−1). The results indicated that the temperature and strain rate have a significant effect on the flow softening and hardening behavior of the material. The work hardening rate may be offset due to the occurrence of the restoration processes, the dynamic coarsening, and spheroidization of the second phase particles. In this regard, two phenomenological constitutive models, Johnson–Cook (JC) and Arrhenius-type equations, were employed to describe the high temperature deformation behavior of the composite. The JC equation diverged from experimental curves mainly in conditions which are far from its reference temperature and reference strain rate. This was justified considering the fact that JC model considers thermal softening, strain rate hardening, and strain hardening as three independent phenomena. In contrast, the Arrhenius-type model was more accurate in modeling of the flow behavior in wide range of temperature and strain rate. The minor deviation at some specified conditions was attributed to the negative strain rate sensitivity of the alloys at low temperature deformation regime.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hot Deformation and Thermo-Mechanical Processing of High Performance Engineering Materials Laboratory, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran 0098-14395-515,Iran e-mail:

Hot Deformation and Thermo-Mechanical Processing of High Performance Engineering Materials Laboratory, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran 0098-14395-515, Iran e-mail:

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran 0098-14395-515, Iran e-mail:

References (47)

Show source-provided references
1. Compressive Deformation Behaviour of Coarse SiC Particle Reinforced Composite: Effect of Age-Hardening and SiC Content
2. Influence of Hot Rolling on the Deformation Behavior of Particle Reinforced Aluminum Metal Matrix Composite10.1016/j.msea.2013.03.039 ↗
3. Effect of Reinforcement Volume Fraction on the Evolution of Reinforcement Size During the Extrusion of Al-SiC Composites10.1016/S0921-5093(01)01526-X ↗
4. Effect of Hot Extrusion on Wear Properties of Al–15 wt.% Mg2Si In Situ Metal Matrix Composites10.1016/j.matdes.2013.07.084 ↗
5. The Influence of Ni Addition and Hot-Extrusion on the Microstructure and Tensile Properties of Al–15% Mg2Si Composite10.1016/j.matdes.2012.10.005 ↗
6. A Critical Review of Experimental Results and Constitutive Descriptions for Metals and Alloys in Hot Working10.1016/j.matdes.2010.11.048 ↗
7. A Thermo-Viscoplastic Constitutive Model for FCC Metals With Application to OFHC Copper10.1016/j.ijmecsci.2009.07.001 ↗
8. A Phenomenological Constitutive Equation to Describe Various Flow Stress Behaviors of Materials in Wide Strain Rate and Temperature Regimes10.1115/1.4000225 ↗
9. A New Mathematical Model for Predicting Flow Stress of Typical High-Strength Alloy Steel at Elevated High Temperature10.1016/j.commatsci.2009.06.026 ↗
10. Fields, D., and Backofen, W., 1957, “Determination of Strain Hardening Characteristics by Torsion Testing,” Proceedings of the American Society for Testing and Materials, Vol. 57, pp. 1259–1272.
11. Constitutive Modeling of High-Strain-Rate Deformation in Metals Based on the Evolution of an Effective Microstructural Length10.1016/j.mechmat.2004.07.005 ↗
12. Experimental and Theoretical Study of Mechanical Behavior of 1100 Aluminum in the Strain Rate Range 10−5−104 s−110.1016/0749-6419(92)90057-J ↗
13. Mechanical Response and Modeling of Fully Compacted Nanocrystalline Iron and Copper10.1016/S0749-6419(00)00023-1 ↗
14. Quasi-Static and Dynamic Responses of Advanced High Strength Steels: Experiments and Modeling
15. Nanocrystalline Aluminum and Iron: Mechanical Behavior at Quasi-Static and High Strain Rates, and Constitutive Modeling10.1016/j.ijplas.2004.07.008 ↗
16. The Relationship Between Stress and Strain for Homogeneous Deformation
17. A Thermo-Viscoplastic Constitutive Model to Predict Elevated-Temperature Flow Behaviour in a Titanium-Modified Austenitic Stainless Steel
18. Johnson, G. R., and Cook, W. H., 1983, “A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures,” Proceedings of the Seventh International Symposium on Ballistics, Hague, The Netherlands, Apr. 19–21, Vol. 21, pp. 541–547.
19. Effect of Strain Rate Upon Plastic Flow of Steel
20. On the Mechanism of Hot Deformation10.1016/0001-6160(66)90207-0 ↗
21. Strength and Structure Under Hot-Working Conditions10.1179/095066069790138056 ↗
22. Constitutive Equations for High Temperature Flow Stress of Aluminium Alloys10.1179/mst.1997.13.3.210 ↗
23. Behaviors of IC10 Alloy Over a Wide Range of Strain Rates and Temperatures: Experiments and Modeling
24. A Comparative Study on Johnson–Cook, Modified Zerilli–Armstrong and Arrhenius-Type Constitutive Models to Predict Elevated Temperature Flow Behaviour in Modified 9CR–1MO Steel10.1016/j.commatsci.2009.09.025 ↗
25. A Comparative Study on the Capability of Johnson–Cook and Arrhenius-Type Constitutive Equations to Describe the Flow Behavior of Mg–6Al–1Zn Alloy10.1016/j.mechmat.2013.12.001 ↗
26. Constitutive Description of High Temperature Flow Behavior of Sanicro-28 Super-Austenitic Stainless Steel10.1016/j.msea.2013.09.036 ↗
27. Constitutive Analysis to Predict High-Temperature Flow Stress in Modified 9CR–1MO (P91) Steel10.1016/j.matdes.2009.08.012 ↗
28. The Prediction of Hot Deformation Behavior in Fe–21MN–2.5Si–1.5Al Transformation-Twinning Induced Plasticity Steel10.1016/j.msea.2012.06.014 ↗
29. The Flow Behavior Modeling of Cast A356 Aluminum Alloy at Elevated Temperatures Considering the Effect of Strain10.1016/j.msea.2011.12.076 ↗
30. The Workability Evaluation of Wrought AZ80 Magnesium Alloy in Hot Compression10.1016/j.matdes.2010.11.025 ↗
31. The High Temperature Flow Behavior Modeling of AZ81 Magnesium Alloy Considering Strain Effects10.1016/j.matdes.2012.02.049 ↗
32. Microstructural Development of Al–15 Wt.% Mg2Si In Situ Composite With Mischmetal Addition
33. The Influence of Cu Rich Intermetallic Phases on the Microstructure, Hardness and Tensile Properties of Al–15% Mg2Si Composite10.1016/j.msea.2010.01.063 ↗
34. Constitutive Descriptions for Hot Compressed 2124-T851 Aluminum Alloy Over a Wide Range of Temperature and Strain Rate10.1016/j.commatsci.2010.08.003 ↗
35. Development of Dynamic Recrystallization Theory
36. Dynamic Restoration Processes in High-Mn TWIP Steels10.1115/1.3120394 ↗
37. On the Mechanisms of Dynamic Recovery10.1016/S1359-6462(02)00235-X ↗
38. Hot Deformation Behavior of 7150 Aluminum Alloy During Compression at Elevated Temperature10.1016/j.matchar.2008.12.012 ↗
39. The Effects of Thermo-Mechanical Parameters on the Microstructure of Thixocast A356 Aluminum Alloy
40. A Phenomenological Constitutive Model for High Temperature Flow Stress Prediction of Al–Cu–Mg Alloy10.1016/j.msea.2011.12.023 ↗
41. Compressive Deformation Behaviour of Al Alloy (2014)–10 Wt.% SiCP Composite: Effects of Strain Rates and Temperatures10.1016/j.msea.2011.09.078 ↗
42. Constitutive Base Analysis of a 7075 Aluminum Alloy During Hot Compression Testing10.1016/j.matdes.2011.05.040 ↗
43. McQueen, H., and Blum, W., 1998, “Recovery and Recrystallization in Al Alloys Fundamentals and Practical Applications,” Proceedings of The 6th International Conference on Aluminum Alloys, ICAA-6, Toyohashi, Japan, July 5–10, pp. 99–112.
44. Hot Deformation Behavior of 2026 Aluminum Alloy During Compression at Elevated Temperature10.1016/j.msea.2009.09.042 ↗
45. Assessment of Constitutive Equations in Modelling the Hot Deformability of Some Overaged Al–Mg–Si Alloys With Varying Solute Contents
46. Variable Strain Rate Sensitivity in an Aluminum Alloy: Response and Constitutive Modeling10.1016/j.ijplas.2012.02.001 ↗
47. A Comparative Analysis of Training Methods for Artificial Neural Network Rainfall-Runoff Models10.1016/j.asoc.2005.02.002 ↗