journal article·2016-10-01

High-Ampacity Overhead Power Lines With Carbon Nanostructure–Epoxy Composites

V. S. N. Ranjith Kumar, S. Kumar, G. Pal, Tushar Shah

Publisher page

Abstract

Design of high-performance power lines with advanced materials is indispensable to effectively eliminate losses in electrical power transmission and distribution (T&D) lines. In this study, aluminum conductor composite core with carbon nanostructure (ACCC–CNS) coating in a multilayered architecture is considered as a novel design alternative to conventional aluminum conductor steel-reinforced (ACSR) transmission line. In the multiphysics approach presented herein, first, electrothermal finite element analysis (FEA) of the ACSR line is performed to obtain its steady-state temperature for a given current. Subsequently, the sag of the ACSR line due to self-weight and thermal expansion is determined by performing thermostructural analysis employing an analytical model. The results are then verified with those obtained from the FEA of the ACSR line. The electrothermal finite element (FE) model and the thermostructural analytical model are then extended to the ACCC–CNS line. The results indicate that the ACCC–CNS line has higher current-carrying capacity (CCC) and lower sag compared to those of the ACSR line. Motivated by the improved performance of the ACCC–CNS line, a systematic parametric study is conducted in order to determine the optimum ampacity, core diameter, and span length. The findings of this study would provide insights into the optimal design of high-performance overhead power lines.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Thermal Analysis in Power Transmission · Smart Materials for Construction · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute Center for Energy (iEnergy), Department of Mechanical and Materials Engineering, Masdar Institute of Science and Technology, P.O. Box 54224, Abu Dhabi, UAE

Mem. ASME Institute Center for Energy (iEnergy), Department of Mechanical and Materials Engineering, Masdar Institute of Science and Technology, P.O. Box 54224, Abu Dhabi, UAE e-mails: ;

Applied Nanostructured Solutions, LLC, 2323 Eastern Boulevard MP 50, Baltimore MD, 21220

References (34)

Show source-provided references
1. Modeling of Carbon Nanotubes and Carbon Nanotube–Polymer Composites10.1016/j.paerosci.2015.12.001 ↗
2. Multiscale Modeling of Effective Electrical Conductivity of Short Carbon Fiber-Carbon Nanotube-Polymer Matrix Hybrid Composites10.1016/j.matdes.2015.09.105 ↗
3. Tunable Morphology and Its Influence on Electrical, Thermal and Mechanical Properties of Carbon Nanostructure-Buckypaper10.1016/j.matdes.2016.03.122 ↗
4. Steel Supported Aluminum Overhead Conductors
5. 3M Aluminum Conductor Composite Reinforced Technical Notebook (795 kcmil Family): Conductor and Accessory Testing
6. Engineering Transmission Lines With ACCC Conductor
7. A Composite Core Conductor for Low Sag at High Temperatures10.1109/TPWRD.2005.848736 ↗
8. Failure Prediction Analysis of an ACCC Conductor Subjected to Thermal and Mechanical Stresses10.1109/TDEI.2010.5448116 ↗
9. Characterization of the Fatigue Properties of a Hybrid Composite Utilized in High Voltage Electric Transmission10.1016/j.compositesa.2011.04.019 ↗
10. Micromechanics Modeling of Fatigue Failure Mechanisms in a Hybrid Polymer Matrix Composite10.1016/j.compscitech.2012.07.017 ↗
11. Effect of a Surface Coating on Flexural Performance of Thermally Aged Hybrid Glass/Carbon Epoxy Composite Rods10.1016/j.compscitech.2014.11.010 ↗
12. Kocar, I., and Ertas, A., 2004, “Thermal Analysis for Determination of Current Carrying Capacity of PE and XLPE Insulated Power Cables Using Finite Element Method,” 12th IEEE Mediterranean Electrotechnical Conference, MELECON 2004, Dubrovnik, Croatia, May 12–15, Vol. 3, pp. 905–908.10.1109/MELCON.2004.134810310.1109/MELCON.2004.1348103 ↗
13. Coupled Electrical and Thermal Analysis of Power Cables Using Finite Element Method10.5772/27350 ↗
14. Extensions to the Finite Element Method for Thermal Analysis of Underground Cable Systems10.1016/S0378-7796(02)00192-X ↗
15. Nguyen, N., Vu, P., and Tlusty, J., 2010, “New Approach of Thermal Field and Ampacity of Underground Cables Using Adaptive hp-FEM,” IEEE PES T&D 2010, New Orleans, LA, Apr. 19–22.10.1109/TDC.2010.548439410.1109/TDC.2010.5484394 ↗
16. Application of the Global Positioning System to the Measurement of Overhead Power Transmission Conductor Sag10.1109/61.974218 ↗
17. Sag and Tension Calculations for Overhead Transmission Lines at High Temperatures-Modified Ruling Span Method10.1109/61.853019 ↗
18. Real-Time Sag Monitoring System for High-Voltage Overhead Transmission Lines Based on Power-Line Carrier Signal Behavior10.1109/TPWRD.2007.905550 ↗
19. Flexible Strain-Tension Calculation Method for Gap-Type Overhead Conductors10.1109/TPWRD.2009.2016631 ↗
20. Du, Y., and Liao, Y., 2011, “Online Estimation of Power Transmission Line Parameters, Temperature and Sag,” North American Power Symposium (NAPS), Boston, MA, Aug. 4–6.10.1109/NAPS.2011.6024854
21. CNT-Infused Fiber and Method Therefor
22. Glass Substrates Having Carbon Nanotubes Grown Thereon and Methods for Production Thereof
23. CNT-Based Resistive Heating for Deicing Composite Structures
24. IEEE Standard for Calculating the Current-Temperature of Bare Overhead Conductors
25. ACSR: Aluminum Conductor Steel Reinforced Bare, 11-4ACSR
26. 1993 · 658
27. Aluminum Association · 1971
28. 2007
29. Carbon Nanotube–Polymer Composites: Chemistry, Processing, Mechanical and Electrical Properties10.1016/j.progpolymsci.2009.09.003 ↗
30. Hartman, D. R., Greenwood, M. E., and Miller, D. M., 1994, “High Strength Glass Fibers,” 39th International SAMPE Symposium and Exhibition: Moving Forward With 50 Years of Leadership in Advanced Materials, Anaheim, CA, Apr. 11–14, Vol. 39, pp. 521–533.
31. The Hierarchical Structure and Properties of Multifunctional Carbon Nanotube Fibre Composites10.1016/j.carbon.2011.10.040 ↗
32. Heat Transfer Mechanisms
33. A Hybrid Numerical Method to Calculate the Sag of Composite Conductors10.1016/j.tifr.2005.09.006 ↗
34. Overhead Conductor Manual