journal article·2012-10-01

Simulation of Material Flow and Heat Evolution in Friction Stir Processing Incorporating Melting

H. W. Nassar, M. K. Khraisheh

Publisher page

Abstract

Friction stir processing (FSP) is a relatively new technology for microstructure refinement of metallic alloys. At high processing speeds, excessive heating due to severe plastic deformation and friction may result in local melting at the interface between the FSP tool and the workpiece. In this work, a computational fluid dynamics (CFD) approach is applied to model material flow and heat evolution during friction stir processing of AZ31B magnesium alloy, taking into consideration the possibility of local melting in the stirring region. This is achieved by introducing the latent heat of fusion into an expression for heat capacity and accounting for possible effects of liquid formation on viscosity and friction. Results show that the temperature in the stirring region increases with the increase in rotational speed and drops slightly with the increase in translational speed. As liquid phase begins to form, the slope of temperature rise with rotational speed decreases and the maximum temperature in the stirring region stabilizes below the liquidus temperature at high rotational speeds. It is also shown that the formation of a semi-molten layer around the tool may result in a reduction in the shearing required for microstructure refinement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

e-mail:

Masdar Institute of Science and Technology, Masdar City, P.O. Box 54224, Abu Dhabi, United Arab Emirates

References (33)

Show source-provided references
1. Friction Stir Butt Welding,
2. High Strain Rate Superplasticity in a Friction Stir Processed 7075 Al Alloy10.1016/S1359-6462(99)00329-2 ↗
3. High Strain Rate Superplasticity in a Commercial 2024 Al Alloy Via Friction Stir Processing10.1016/S0921-5093(03)00367-8 ↗
4. Friction Stir Processing: A New Grain Refinement Technique to Achieve High Strain Rate Superplasticity in Commercial Alloys
5. MWCNTs/AZ31 Surface Composites Fabricated by Friction Stir Processing10.1016/j.msea.2006.01.016 ↗
6. Using Friction Stir Processing to Fabricate MgAlZn Intermetallic Alloys10.1016/j.scriptamat.2005.08.019 ↗
7. Friction Stir Welding and Processing
8. Design of the Friction Stir Welding Tool Using the Continuum Based FEM Model10.1016/j.msea.2005.09.040 ↗
9. Finite Element Modeling of Friction Stir Welding-Thermal and Thermomechanical Analysis10.1016/S0890-6955(03)00158-5 ↗
10. A Local Model for the Thermomechanical Conditions in Friction Stir Welding10.1088/0965-0393/13/1/006 ↗
11. Modeling the Effects of Coolant Application in Friction Stir Processing on Material Microstructure Using 3D CFD Analysis
12. Modeling of Friction Stir Processing Using 3D CFD Analysis10.1007/s12289-009-0662-y ↗
13. Modeling Strain Hardening and Texture Evolution in Friction Stir Welding of Stainless Steel10.1016/j.msea.2005.03.002 ↗
14. 3-Dimensional CFD Modeling of Flow Round a Threaded Friction Stir Welding Tool Profile10.1016/j.jmatprotec.2005.03.015 ↗
15. Three-Dimensional Heat and Material Flow During Friction Stir Welding of Mild Steel10.1016/j.actamat.2006.09.009 ↗
16. Three-Dimensional Modeling of the Friction Stir-Welding Process10.1016/S0890-6955(02)00114-1 ↗
17. Mechanical and Thermal Modeling of Friction Stir Welding10.1016/j.jmatprotec.2005.07.014 ↗
18. 3D Modeling of Material Flow in Friction Stir Welding Under Different Process Parameters10.1016/j.jmatprotec.2006.09.027 ↗
19. Thermal Modeling of Friction Stir Welding in a Moving Coordinate System and Its Validation10.1016/S0890-6955(03)00022-1 ↗
20. Frigaard, O., Grong, O., Hjelen, J., Gulbrandsen-Dahl, S., and Midling, O., 1999, “Characterization of the Subgrain Structure in Friction Stir Welded Aluminium Alloys Using the SEM-EBSD Technique,” Proceedings of the 1st International Symposium on Friction Stir Welding, June 14–16, Thousand Oaks, CA.
21. Microstructures of Friction Stir Weld Joints Between an Aluminium-Base Metal Matrix Composite and a Monolithic Aluminium Alloy10.1016/S1359-6462(03)00215-X ↗
22. On the Role of Process Variables in the Friction Stir Processing of Cast Aluminum A319 Alloy10.1016/j.matdes.2009.08.001 ↗
23. Incipient Melting During Friction Stir Processing of AZ91 Magnesium Castings10.1016/j.msea.2010.07.093 ↗
24. Friction Stir Processing of Commercial AZ31 Magnesium Alloy10.1016/j.jmatprotec.2007.03.045 ↗
25. 2008
26. Solidification Curves for Commercial Mg Alloys Determined From Differential Scanning Calirometry With Improved Heat-Transfer Modeling10.1007/s11661-007-9237-z ↗
27. 1982
28. Properties and Selection: Irons, Steels, and High-Performance Alloys
30. Constants for Hot Deformation Constitutive Models for Recent Experimental Data10.1179/136217110X12665778348380 ↗
31. 1994 · 68
32. Surface Roughness and Friction Coefficient in Peened Friction Stir Welded 2195 Aluminum Alloy10.1016/j.apsusc.2009.04.011 ↗
33. Correlation Between the Microstructure and Forces Generated During Friction Stir Processing of AA5052