journal article·2009-10-01

Modeling of Lath Martensitic Microstructures and Failure Evolution in Steel Alloys

T. M. Hatem, M. A. Zikry

Publisher page

Abstract

A multiple-slip dislocation-density-based crystalline formulation, specialized finite-element formulations, and Voronoi tessellations adapted to martensitic orientations were used to investigate dislocation-density activities and crack tip blunting in high strength martensitic steels. The formulation is based on accounting for variant morphologies and orientations, retained austenite, and initial dislocations densities that are uniquely inherent to martensitic microstructures. The effects of variant distributions and arrangements are investigated for different crack and void interaction distributions and arrangements. The analysis indicates that for certain orientations related to specific variant block arrangements, which correspond to random low angle orientations, cracks can be blunted by dislocation-density activities along transgranular planes. For other variant block arrangements, which correspond to random high angle orientations, sharp crack growth can occur due to dislocation activities along intergranular planes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC 27695-7910

References (54)

Show source-provided references
1. Otsuka
2. Deformation and Fracture in Martensitic Carbon Steels Tempered at Low Temperature
3. Deformation, Fracture, and Mechanical Properties of Low-Temperature-Tempered Martensite in SAE 43xx Steels10.1007/s11661-997-0139-x ↗
4. Effect of Block Size on the Strength of Lath Martensite in Low Carbon Steels10.1016/j.msea.2005.12.048 ↗
5. Retained Austenite and Tempered Martensite Embrittlement10.1007/BF02646396 ↗
6. Effect of Retained Austenite on the Microstructure and Mechanical Properties of Martensitic Precipitation Hardening Stainless Steel10.1023/A:1004626907367 ↗
7. The Morphology and Crystallography of Ferrous Lath Martensite. Studies of Fe-20%Ni-5%Mn—I. Optical Microscopy10.1016/0001-6160(81)90051-1 ↗
8. The Morphology and Crystallography of Ferrous Lath Martensite. Studies of Fe-20%Ni-5%Mn—II. Transmission Electron Microscopy10.1016/0001-6160(81)90052-3 ↗
9. The Morphology and Crystallography of Ferrous Lath Martensite. Studies of Fe-20%Ni-5%Mn—III. Surface Relief, The Shape Strain and Related Features10.1016/0001-6160(81)90053-5 ↗
10. Crystallography and Morphology of Ferrous Lath Martensite10.1016/0026-0800(81)90019-7 ↗
11. Characteristics of Lath Martensite—Part I: Crystallographic and Substructural Features10.1007/BF02644284 ↗
12. Characteristics of Lath Martensite—II10.1007/BF02644285 ↗
13. Characteristics of Lath Martensite—III10.1007/BF02644286 ↗
14. The Morphology and Crystallography of Lath Martensite in Alloys Steels10.1016/j.actamat.2006.07.009 ↗
15. The Morphology and Crystallography of Lath Martensite in Fe-C Alloys10.1016/S1359-6454(02)00577-3 ↗
16. Microstructure of Ausformed Lath Martensite in 18%Ni Maraging Steel10.1051/jp4:2003923 ↗
17. Dislocation Density Within Lath Martensite in Fe-C and Fe-Ni Alloys10.2355/isijinternational.43.1475 ↗
18. Effect of Austenite Grain Size on the Morphology and Crystallography of Lath Martensite in Low Carbon Steels10.2355/isijinternational.45.91 ↗
19. Crystallography of Lath Martensite in Steels10.2320/matertrans1989.33.235 ↗
20. 3D Crystallography and Morphological Analysis of Coarse Martensite: Combining EBSD and Serial Sectioning10.1016/j.scriptamat.2005.12.061 ↗
22. Effects of Gettering Sulfur as CrS or MnS on Void Generation Behavior in Ultra-High Strength Steel10.1016/S1359-6462(02)00067-2 ↗
23. A Discussion of the Effect of Inclusion Volume Fraction on the Toughness of Steel10.1016/j.msea.2007.02.015 ↗
24. An Analysis of the Dynamic Shear Failure Resistance of Structural Metal10.1016/S0022-5096(98)00020-9 ↗
25. An Interactive Micro-Void Shear Localization Mechanism in High Strength Steels10.1016/j.jmps.2006.08.002 ↗
26. Micromechanical Simulation of Dynamic Fracture Using Cohesive Finite Element Method10.1115/1.1647127 ↗
27. Modeling Void Coalescence During Ductile Fracture of a Steel10.1016/j.msea.2003.08.018 ↗
28. Computer Simulation of Martensitic Simulation of Martensitic Transformation in Fe-Ni Face-Centered Cubic Alloys10.1016/0921-5093(94)09735-6 ↗
29. Study of Martensitic Transformation by Use of Monte-Carlo Method and Molecular Dynamics10.1016/j.msea.2006.02.057 ↗
30. MD Modeling of Defects in Fe and Their Interactions10.1016/j.jnucmat.2003.08.037 ↗
31. Inelastic Microstructural Failure Mechanisms in Crystalline Materials With High Angle Grain Boundaries10.1016/0022-5096(96)00049-X ↗
32. Effects of Grain Boundaries and Dislocation Density Evolution on Large Strain Deformation Modes in FCC Crystalline Materials10.1023/A:1008717428264 ↗
33. Hatem, T. M., and Zikry, M. A., 2009, “Dislocation-Density Crystalline Plasticity Modelling of Lath Martensitic Microstructures in Steel Alloys,” Philos. Mag. A0141-8610, in press.10.1080/14786430903185999 ↗
34. An O(n log n) Algorithm for Rectilinear Minimal Spanning Trees10.1145/322123.322124 ↗
35. Two Dimensional Voronoi Diagram in the Lp-Metric10.1145/322217.322219 ↗
36. A 2-Parameter Description of Heterogeneous Dislocation Distributions in Deformed Metal Crystals10.1016/0025-5416(87)90463-0 ↗
37. Kinetics of Flow and Strain-Hardening10.1016/0001-6160(81)90112-7 ↗
38. Effect of Grain Orientation on Deformation Structure in Cold-Rolled Polycrystalline Aluminum10.1016/S1359-6454(98)00229-8 ↗
39. Three Dimensional Dislocation-Based Crystalline Constitutive Formulation for Ordered Intermetallics10.1016/S1359-6462(97)00512-5 ↗
40. Evolution of F.C.C. Deformation Structures in Polyslip10.1016/0956-7151(92)90296-Q ↗
41. Cold Deformation Microstructures10.1179/mst.1990.6.11.1039 ↗
42. The Mechanism of Plastic Deformation of Crystals—Part I: Theoretical10.1098/rspa.1934.0106 ↗
43. The Mechanism of Plastic Deformation of Crystals—Part II: Comparison With Observations10.1098/rspa.1934.0107 ↗
44. Multislip in F.C.C. Crystals: A Theoretical Approach Compared With Experimental Data10.1016/0001-6160(82)90184-5 ↗
45. Glide Mechanisms in B.C.C. Crystals: An Investigation of the Case of Alfa Iron Through Multislip and Latent Hardening Test10.1016/0001-6160(83)90004-4 ↗
46. A Micromechanical Model of Hardening, Rate Sensitivity and Thermal Softening in B.C.C Single Crystal10.1016/S0022-5096(01)00114-4 ↗
47. Bhadeshia
48. McMahon · 180
49. An Accurate and Stable Algorithm for High Strain-Rate Finite Strain Plasticity10.1016/0045-7949(94)90004-3 ↗
50. Dislocation Nucleation From a Crack Tip: An Analysis Based on the Peierls Concept10.1016/S0022-5096(05)80012-2 ↗
51. Intergranular and Transgranular Crack Growth at Triple Junction Boundaries in Ordered Intermetallics10.1016/S0749-6419(98)00017-5 ↗
52. Modeling of Grain-Boundary Effects and Intergranular and Transgranular Failure in Polycrystalline Intermetallics10.1007/BF02586131 ↗
53. Cleavage Cracking Resistance of High Angle Grain Boundaries in Fe–3%Si Alloy10.1016/S0167-6636(02)00284-3 ↗
54. Crack Trapping Effect of Persistent Grain Boundary Islands10.1111/j.1460-2695.2005.00908.x ↗