A Physics-Based Model for Metal Matrix Composites Deformation During Machining: A Modified Constitutive Equation
Source abstract
Abstract
One of the main challenges encountered in modeling the behavior of metal matrix composites (MMCs) during machining is the availability of a suitable constitutive equation. Currently, the Johnson–Cook (J–C) constitutive equation is being used, even though it was developed for homogeneous materials. In such a case, an equivalent set of homogeneous parameters is used, which is only suitable for a particular combination of particle size and volume fraction. The current work presents a modified form of the J–C constitutive equation that suits MMCs, and explicitly accounts for the effects of particle size and volume fraction, as controlled parameters. Also, an energy-based force model is presented, which considers particle cracking and debonding based on the principles of fracture mechanics. In order to validate the new approach, cutting forces were predicted and compared to experimental results, where a good agreement was found. In addition, the predicted forces were compared to other analytical models available in the literature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced machining processes and optimization · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Faculty of Engineering, Alexandria University, Alexandria 21544, Egypt
Machining Research Laboratory (MRL), Faculty of Engineering and Applied Science, University of Ontario Institute of Technology (UOIT), Oshawa, ON L1H 7K4, Canada
References (41)
Show source-provided references
1. Particle Reinforced Aluminium and Magnesium Matrix Composites10.1179/imr.1994.39.1.1 ↗
2. Plastic Deformation and Failure in A359 Aluminium and an A359–SiCp MMC Under Quasi-Static and High-Strain-Rate Tension10.1177/0021998306063351 ↗
3. Analytical Model for Force Prediction When Machining Metal Matrix Composite10.1016/j.ijmecsci.2012.03.010 ↗
4. Identification of the Specific Cutting Force for Geometrically Defined Cutting Edges and Varying Cutting Conditions10.1016/j.ijmachtools.2014.03.009 ↗
5. Analytical Modelling of Chip Geometry and Cutting Forces in Helical Ball End Milling of Superalloy Inconel 71810.1016/j.cirpj.2010.11.003 ↗
6. Prediction of Cutting Forces in Three and Five-Axis Ballend Milling With Tool Indentation Effect10.1016/j.ijmachtools.2012.12.002 ↗
7. Modelling the Effects of Tool-Edge Radius on Residual Stresses When Orthogonal Cutting AISI-316L10.1016/j.ijmachtools.2006.03.004 ↗
8. Sensitivity Analysis of Cryogenic Cooling on Machining of Magnesium Alloy AZ31B-O10.1016/j.procir.2015.03.030 ↗
9. Mechanistic Identification of Specific Force Coefficients for a General End Mill10.1016/j.ijmachtools.2003.10.001 ↗
10. Identification of Dynamic Cutting Force Coefficients and Chatter Stability With Process Damping10.1016/j.cirp.2008.03.048 ↗
11. Effects of Edge Preparation and Feed When Hard Turning a Hot Work Die Steel With Polycrystalline Cubic Boron Nitride Tools10.1016/S0007-8506(07)60373-4 ↗
12. Johnson, G. R., and Cook, W. H., 1983, “A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures,” Seventh International Symposium on Ballistics, Hague, The Netherlands, pp. 541–547.http://www.adhaesion.com/binary/A%20constitutive%20model%20and%20data%20for%20metals%20subjected%20to%20large%20strains,%20high%20strain%20rates%20and%20high%20temperatures.pdf
13. Machinability of Particulate Aluminium Matrix Composites10.1016/S0007-8506(07)61151-2 ↗
14. Machinability of Graphitic Metal Matrix Composites as a Function of Reinforcing Particles10.1016/S0007-8506(07)63135-7 ↗
15. Machining of High Strength Light Weight Alloys for Engine Applications10.1016/j.cirp.2007.05.027 ↗
16. An Energy Based Analytical Force Model for Orthogonal Cutting of Metal Matrix Composites10.1016/S0007-8506(07)60652-0 ↗
17. Prediction of Cutting Forces in Machining of Metal Matrix Composites10.1016/j.ijmachtools.2005.11.012 ↗
18. Analytical Modelling of Tool Wear Progression During Turning Particulate Reinforced Metal Matrix Composites10.1016/S0007-8506(07)60048-1 ↗
19. Kannan, S., Kishawy, H. A., Deiab, I. M., and Surappa, M. L., 2005, “Modelling of Tool Flank Wear Progression During Orthogonal Machining of Metal Matrix Composites,” Trans. North Am. Manuf. Res. Inst. SME NAMRC, 33, pp. 605–612.
20. Machinability and Modelling of Cutting Mechanism for Titanium Metal Matrix Composites
21. On Machining Modelling of Metal Matrix Composites: A Novel Comprehensive Constitutive Equation10.1016/j.ijmecsci.2016.01.020 ↗
22. A Methodology for Practical Cutting Force Evaluation Based on the Energy Spent in the Cutting System10.1080/10910340802306017 ↗
23. Influence of Alumina Particles on the Mechanics of Machining Metal Matrix Composites10.1016/j.ijmachtools.2004.09.013 ↗
24. Influence of Particle Volume Fraction, Shape, and Aspect Ratio on the Behaviour of Particle-Reinforced Metal–Matrix Composites at High Rates of Strain10.1016/S1359-6454(98)00250-X ↗
25. Mechanical Behaviour of Particle Reinforced Metal Matrix Composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
26. Fracture of Brittle Particles in a Ductile Matrix10.1007/BF00018353 ↗
27. The Assessment of Plastic Deformation in Metal Cutting10.1016/j.jmatprotec.2003.10.015 ↗
28. 1989
29. A Numerical Method for Calculating Temperature Distributions in Machining, From Force and Shear Angle Measurements10.1016/0020-7357(76)90043-3 ↗
30. Particle Fracture in High-Volume-Fraction Ceramic-Reinforced Metals: Governing Parameters and Implications for Composite Failure10.1016/j.jmps.2009.08.005 ↗
31. Modelling of Chip–Tool Interface Friction to Predict Cutting Forces in Machining of Al/SiCp Composites10.1016/j.ijmachtools.2009.03.003 ↗
32. Modelling of Two-Body Abrasive Wear Under Multiple Contact Conditions10.1016/S0043-1648(98)00161-6 ↗
33. A Theory of Friction and Wear During the Abrasion of Metals10.1016/0043-1648(62)90235-1 ↗
34. Abrasive Wear Mechanisms and the Grit Size Effect10.1016/0043-1648(79)90188-1 ↗
35. 1999
36. Evaluated Material Properties for a Sintered α-Alumina10.1111/j.1151-2916.1997.tb03074.x ↗
37. 2001
38. Lesuer, D. R., Kay, G. J., and LeBlanc, M. M., 1999, “Modelling Large-Strain, High-Rate Deformation in Metals,” Third Biennial Tri-Laboratory Engineering Conference on Modelling and Simulation, Pleasanton, CA.https://e-reports-ext.llnl.gov/pdf/237821.pdf#page=277
39. A New Quantitative Sensitivity Analysis of the Flow Stress of 18 Engineering Materials in Machining10.1115/1.1857935 ↗
40. The Mechanical Response of a 6061-T6 Al/Al2O3 Metal Matrix Composite at High Rates of Deformation10.1016/0956-7151(95)00123-D ↗
41. Multi-Step 3-D Finite Element Modelling of Subsurface Damage in Machining Particulate Reinforced Metal Matrix Composites10.1016/j.compositesa.2009.05.017 ↗