High Strain Rate Behavior of Carbon Nanotubes Reinforced Aluminum Foams
Source abstract
Abstract
The mechanical behavior of closed-cell aluminum foam composites under different compressive loadings has been investigated. Closed-cell aluminum foam composites made using the liquid metallurgy route were reinforced with multiwalled carbon nanotubes (CNTs) with different concentrations, namely, 1%, 2%, and 3% by weight. The reinforced foams were experimentally tested under dynamic compression using the split Hopkinson pressure bar (SHPB) system over a range of strain rates (up to 2200 s−1). For comparison, aluminum foams were also tested under quasi-static compression. It was observed that closed-cell aluminum foam composites are strain rate sensitive. The mechanical properties of CNT reinforced Al-foams, namely, yield stress, plateau stress, and energy absorption capacity are significantly higher than that of monolithic Al-foam under both low and high strain rates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Aerospace Engineering Department, University of Missouri, Columbia, MO 65211;
National Center for Nanotechnology, KACST, P.O. Box 6086, Riyadh 11442, Saudi Arabia
Advanced Materials and Processes Research Institute (CSIR), Bhopal 462064, India
Mechanical and Aerospace Engineering Department, University of Missouri, Columbia, MO 65211 e-mail:
References (39)
Show source-provided references
1. Produit Métall. pour l'obtention d'objets Laminés
2. 1997
3. Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications10.1002/adem.200800091 ↗
4. Aluminium Foam for Automotive Applications10.1002/(SICI)1527-2648(200004)2:4<200::AID-ADEM200>3.0.CO;2-2 ↗
5. Characteristics of Aluminium Metal Foam for Automotive Applications10.1007/s12666-010-0117-7 ↗
6. A High-Speed Train Made of Aluminium Foam
7. The Mechanical Properties of Cellular Solids10.1007/BF02645546 ↗
8. A Comparison of Mechanical Properties of Some Foams and Honeycombs10.1007/BF00580144 ↗
9. Efficient Structural Components Using Porous Metals10.1016/S0921-5093(96)10842-X ↗
10. Mechanical Behavior of Metallic Foams10.1146/annurev.matsci.30.1.191 ↗
11. Experimental Study of Energy Absorption in a Close-Celled Aluminum Foam Under Dynamic Loading10.1016/S1359-6462(99)00038-X ↗
12. High Strain Rate Compression of Closed-Cell Aluminium Foams10.1016/S0921-5093(00)01219-3 ↗
13. High Strain Rate Compressive Behaviour of Aluminium Alloy Foams10.1016/S0734-743X(99)00153-0 ↗
14. Comparison of Quasi-Static and Dynamic Compression Behavior of Closed-Cell Aluminum Foam10.1016/j.msea.2009.07.017 ↗
15. An Experimental Study on the Behaviour Under Impact Loading of Metallic Cellular Materials10.1016/j.ijmecsci.2004.12.012 ↗
16. Compressive Response of a Closed-Cell Aluminum Foam at High Strain Rate10.1016/j.scriptamat.2005.10.062 ↗
17. Compressive Behavior of Aluminum Foams at Low and High Strain Rates10.1007/s11771-007-0269-8 ↗
18. Effect of Strain Rate and Relative Density on Compressive Deformation Behaviour of Closed Cell Aluminum-Fly Ash Composite Foam10.1016/j.matdes.2008.06.059 ↗
19. Compressive Properties of a Closed-Cell Aluminum Foam as a Function of Strain Rate and Temperature10.1016/j.msea.2009.07.007 ↗
20. Evaluation of the Effect of the Strain Rate on the Compressive Response of a Closed-Cell Aluminium Foam Using the Split Hopkinson Pressure Bar Test10.1016/j.matdes.2012.12.050 ↗
21. Compressive Deformation and Energy Absorption Characteristics of Closed Cell Aluminum-Fly Ash Particle Composite Foam10.1016/j.msea.2009.01.019 ↗
22. Foaming Experiments on LM25 Alloy Reinforced With SiC Particulates10.1016/j.msea.2010.06.024 ↗
23. Strain-Rate Effects on the Compressive Response of Closed-Cell Copper-Coated Carbon Fiber/Aluminum Composite Foam10.1016/j.scriptamat.2010.09.005 ↗
24. Effect of Ceramic Particle Addition on the Foaming Behavior, Cell Structure and Mechanical Properties of P/M AlSi7 Foam10.1016/j.msea.2006.03.013 ↗
25. Influences of Titanium Hydride (TiH2) Content and Holding Temperature in Foamed Pure Aluminum10.1080/10426910902748016 ↗
26. The Effect of Cooling Rate on the Structure and Properties of Closed-Cell Aluminium Foams10.1016/j.actamat.2010.05.039 ↗
27. A Novel Approach to Prepare Aluminium-Alloy Foams Reinforced by Carbon-Nanotubes10.1016/j.matlet.2015.07.115 ↗
28. A Novel Approach to Obtain In-Situ Growth Carbon Nanotube Reinforced Aluminum Foams With Enhanced Properties10.1016/j.matlet.2015.09.093 ↗
29. Microstructure and Properties of Spark Plasma Sintered Carbon Nanotube Reinforced Aluminum Matrix Composites10.1002/adem.201100132 ↗
30. Microstructure and Mechanical Behavior of Copper Coated Multiwall Carbon Nanotubes Reinforced Aluminum Composites10.1016/j.msea.2015.04.070 ↗
31. Effects of the Strain Rate and Alloying on the Compression Characteristics of Closed Cell Aluminum Foams10.2320/matertrans.MRA2008487 ↗
32. Standard Test Methods for Determining Average Grain Size10.1520/E0112-10 ↗
33. 2011
34. Hopkinson Bar Experimental Technique: A Critical Review10.1115/1.1704626 ↗
35. 1994
36. Split-Hopkinson Pressure Bar Testing of Ceramics
37. Pulse Shaping Techniques for Testing Brittle Materials With a Split Hopkinson Pressure Bar10.1007/BF02411056 ↗
38. Improved Pulse Shaping to Achieve Constant Strain Rate and Stress Equilibrium in Split-Hopkinson Pressure Bar Testing10.1007/s11661-007-9204-8 ↗
39. High Strain Rate Behavior of Graphene Reinforced Polyurethane Composites10.1115/1.4029291 ↗