journal article·2019-01-01Open access

Mechanical Behavior of Differently Oriented Electron Beam Melting Ti–6Al–4V Components Using Digital Image Correlation

Edel Arrieta, Mohammad Haque, Jorge Mireles, Calvin Stewart, Cesar Carrasco, Ryan. B. Wicker

Abstract

Mechanical properties of additive manufactured metal components can be affected by the orientation of the layer deposition. In this investigation, Ti–6Al–4V cylindrical specimens were fabricated by electron beam melting (EBM) at four different build angles (0 deg, 30 deg, 60 deg, and 90 deg) and tested as per ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials. With the layer-by-layer fabrication suggesting granting anisotropic properties to the builds, strain fields were recorded by digital image correlation (DIC) in the search for shear effects under uniaxial loads. For the validation of this measuring method, axial strains were measured with a clip extensometer and a virtual extensometer, simultaneously. Failure analysis of the specimens at different orientations was conducted to evidence the recording of shear strain fields. The failure analysis included fractography, optical micrographs of the microstructure distribution, and failure profiles displaying different failure features associated with the layering orientation. Additionally, an experimental study case of how the failure mode of components can potentially be designed from the fabrication process is presented. At the end, remarks about the shear effects found, and an insight of the possibility of designing components by failure for safer structures are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

W.M. Keck Center for 3D Innovation, The University of Texas at El Paso, El Paso, TX 79968 e-mail:

Department of Mechanical Engineering, The University of Texas at El Paso, El Paso, TX 79968

W. M. Keck Center for 3D Innovation, The University of Texas at El Paso, El Paso, TX 79968

Future Aerospace Science and Technology Center (FAST), The University of Texas at El Paso, El Paso, TX 79968

Funding

National Science Foundation

References (17)

Show source-provided references
1. Additive Manufacturing of Metallic Components by Selective Electron Beam Melting—A Review10.1080/09506608.2016.1176289 ↗
2. The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures10.1115/1.4001743 ↗
3. Metallurgy of Additive Manufacturing: Examples From Electron Beam Melting10.1016/j.addma.2014.12.002 ↗
4. Fatigue Behaviour of Additively Manufactured Ti-6Al-4 V10.1016/j.proeng.2015.12.632 ↗
5. Microstructure and Mechanical Behavior of Ti–6Al–4V Produced by Rapid-Layer Manufacturing, for Biomedical Applications10.1016/j.jmbbm.2008.05.004 ↗
6. Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of as-Deposited ARCAM EBM Ti-6Al-4V10.1007/s11837-015-1298-7 ↗
7. Gong, H., Rafi, K., Starr, T., and Stucker, B., 2013, “The Effects of Processing Parameters on Defect Regularity in Ti-6Al-4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting,” 24th Annual International Solid Freeform Fabrication Symposium (ISFFS), Austin, TX, Aug. 12–14, pp. 424–439.https://sffsymposium.engr.utexas.edu/Manuscripts/2013/2013-33-Gong.pdf
8. The Metallurgy and Processing Science of Metal Additive Manufacturing10.1080/09506608.2015.1116649 ↗
9. Standard Test Methods for Tension Testing of Metallic Materials10.1520/E0008_E0008M-16A ↗
10. Mesomechanic Strain Analysis of Twill-Weave Composite Lamina Under Unidirectional in-Plane Tension10.1016/j.compositesa.2008.01.006 ↗
11. Local Strain in a 5-Harness Satin Weave Composite Under Static Tension—Part I: Experimental Analysis10.1016/j.compscitech.2011.03.021 ↗
12. Optimization of Digital Image Correlation for High-Resolution Strain Mapping of Ceramic Composites10.1007/s11340-012-9617-1 ↗
13. Mireles, J., 2016, “Joining of Metallic Structures Using Powder Bed Fusion Additive Manufacturing Technology,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 8–10, p. 75.10.1016/j.addma.2016.01.001 ↗
14. Effect of Process Variables on Transformation-Texture Development in Ti-6Al-4V Sheet Following Beta Heat Treatment10.1007/s11661-013-1735-6 ↗
15. Characterising the Effects of Strain Rate, Crystallographic Texture and Direction of Loading on the Mechanical Behaviour of Ti-6Al-4V10.1007/s40870-015-0040-4 ↗
16. Revealing Martensitic Transformation and α/β Interface Evolution in Electron Beam Melting Three-Dimensional-Printed Ti-6Al-4V10.1038/srep26039 ↗
17. Recent Progress of Additive Manufactured Ti-6Al-4V by Electron Beam Melting