journal article·2011-01-01

Frequency-Steered Acoustic Arrays: Application to Structural Health Monitoring of Composite Plates

Buli Xu, Matteo Senesi, Massimo Ruzzene

Publisher page

Abstract

This paper presents the design, characterization, and application of periodic piezoelectric actuator arrays for structural health monitoring. In the proposed array configuration, all elements are activated simultaneously to achieve strong frequency-dependent directional actuation, which allows beam steering through a sweep of the excitation frequency and limited hardware requirements. The array enables in situ monitoring of critical components through strongly focused actuation and directional scanning capabilities. The concept is illustrated for a selected design with quadrilateral topology on an isotropic plate. The application to composite panels is also specifically discussed by illustrating the complexity of the corresponding dispersion properties, which suggest design challenges for mode tuning. A quadrilateral design is tested for excitation of the A0 mode on a selected lay-up sequence to illustrate the generality of the proposed concept and its applicability to composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Acoustic Wave Phenomena Research · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA 30332

School of Aerospace Engineering and School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332

References (22)

Show source-provided references
1. Optimization of Lamb Wave Inspection Techniques10.1016/0963-8695(92)90003-Y ↗
2. A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential10.1115/1.1491272 ↗
3. The Potential of Guided Waves for Monitoring Large Areas of Metallic Structures10.1023/A:1010601829968 ↗
4. Strategies for Guided-Wave Structural Health Monitoring10.1098/rspa.2007.0048 ↗
5. Detection, Localization and Characterization of Damage in Plates With an In Situ Array of Spatially Distributed Ultrasonic Sensors10.1088/0964-1726/17/3/035035 ↗
6. Real Time Synthetic Aperature Imaging System
7. Ultrasonic Phased Arrays for Nondestructive Testing10.1016/0308-9126(87)90290-2 ↗
8. Implementing Guided Wave Mode Control by Use of a Phased Transducer Array10.1109/58.920708 ↗
9. Embedded-Ultrasonics Structural Radar for Nondestructive Evaluation of Thin-Wall Structures10.1115/IMECE2002-39017 ↗
10. Omni-Directional Guided Wave Transducer Arrays for the Rapid Inspection of Large Areas of Plate Structures10.1109/TUFFC.2003.1209557 ↗
11. In-Situ Optimized PWAS Phased Arrays for Lamb Wave Structural Health Monitoring
12. In Situ 2-D Piezoelectric Wafer Active Sensors Arrays for Guided Wave Damage Detection10.1016/j.ultras.2008.03.005 ↗
13. Guided Wave Excitation by a Clover Transducer for Structural Health Monitoring: Theory and Experiments10.1088/0964-1726/18/7/075005 ↗
14. On the Beamsteering Characteristics of MFC Phased Arrays for Structural Health Monitoring10.2514/6.2008-1969 ↗
15. A Synthetic Time-Reversal Imaging Method for Structural Health Monitoring10.1088/0964-1726/13/2/020 ↗
16. Pitch-Catch Active Sensing Methods in Structural Health Monitoring for Aircraft Structures10.1177/1475921707081979 ↗
17. Imaging Algorithms for Locating Damage via In Situ Ultrasonic Sensors
18. Adaptive Imaging of Damage From Changes in Guided Wave Signals Recorded From Spatially Distributed Arrays
19. Two-Dimensional Periodic Actuators for Frequency-Based Beam Steering10.1088/0964-1726/18/12/125023 ↗
20. Finite-Dimensional Piezoelectric Transducer Modeling for Guided Wave Based Structural Health Monitoring10.1088/0964-1726/14/6/037 ↗
21. Hall
22. Modeling Wave Propagation in Damped Waveguides of Arbitrary Cross-Section10.1016/j.jsv.2006.01.021 ↗