journal article·2015-10-01

Verification of a Thermoviscoplastic Constitutive Relation for Brass Material Using Taylor's Test

Farid Abed, Tomasz Jankowiak, Alexis Rusinek

Publisher page

Abstract

This paper presents a methodology to define and verify the dynamic behavior of materials based on Taylor's test. A brass alloy with a microstructure composed mainly of two pure metals that have two different crystal structures, copper (face-centered cubic (fcc)) and zinc (hexagonal closed-packed (hcp)), is used in this study. A combined approach of different principal mechanisms controlled by the emergence and evolution of mobile dislocations as well as the long-range intersections between forest dislocations is, therefore, adopted to develop accurate definition for its flow stress. The constitutive relation is verified against experimental results conducted at low and high strain rates and temperatures using compression screw machine and split Hopkinson pressure bar (SHPB), respectively. The present model predicted results that compare well with experiments and was capable of simulating the low strain rate sensitivity that was observed during the several static and dynamic tests. The verified constitutive relations are further integrated and implemented in a commercial finite element (FE) code for three-dimensional (3D) Taylor's test simulations. A Taylor's test enables the definition of only one point on the stress–strain curve for a given strain rate using the initial and final geometry of the specimen after impact into a rigid surface. Thus, it is necessary to perform several tests with different geometries to define the complete material behavior under dynamic loadings. The advantage of using strain rate independent brass in this study is the possibility to rebuild the complete process of strain hardening during Taylor's tests by using the same specimen geometry. Experimental results using the Taylor test technique at a range of velocity impacts between 70 m/s and 200 m/s are utilized in this study to validate the constitutive model of predicting the dynamic behavior of brass at extreme conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metallurgy and Cultural Artifacts

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, American University of Sharjah, P.O. Box 26666, Sharjah, UAE e-mail:

Institute of Structural Engineering, Poznan University of Technology, Piotrowo 5, Poznan 60-965, Poland

Laboratory of Mechanics, Biomechanics, Polymers and Structures, National Engineering School of Metz, 1 route d'Ars Laquenexy, Metz Cedex 03 57045, France

References (34)

Show source-provided references
1. Strain Rate Sensitivity of Flow Stress at Low Temperature in 304N Stainless Steel10.1016/0749-6419(92)90044-D ↗
2. Strain Rate Sensitivity, Strain Hardening, and Yield Behavior of 304L Stainless Steel10.1115/1.3225893 ↗
3. Adiabatic Shear Band Localizations in BCC Metals at High Strain Rates and Various Initial Temperatures
4. Experimental and Numerical Study on the Perforation Process of Mild Steel Sheets Subjected to Perpendicular Impact by Hemispherical Projectiles10.1016/j.ijimpeng.2008.09.004 ↗
5. Selected Topics of High Speed Machining Analysis
6. Dynamic Localizations in HSLA-65 and DH-36 Structural Steel at Elevated Temperatures10.1115/1.4023775 ↗
7. Johnson, G. R., and Cook, W. H., 1983, “A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures,” 7th International Symposium on Ballisitics, The Hague, The Netherlands, Apr. 19–21, pp. 541–547.
8. Dislocation-Mechanics-Based Constitutive Relations for Material Dynamics Calculation10.1063/1.338024 ↗
9. A Constitutive Description of the Deformation of Copper Based on the Use of the Mechanical Threshold Stress as an Internal State Variable10.1016/0001-6160(88)90030-2 ↗
10. Shear Testing of a Sheet Steel at Wide Range of Strain Rates and a Constitutive Relation With Strain-Rate and Temperature Dependence of the Flow Stress10.1016/S0749-6419(00)00020-6 ↗
11. Effect of Dislocation Density Evolution on the Thermomechnical Response of Metals With Different Crystal Structures at Low and High Strain Rates and Temperatures
12. A Dislocation Based Constitutive Description for Modeling the Behavior of FCC Metals Within Wide Ranges of Strain Rate and Temperature10.1016/j.mechmat.2011.09.008 ↗
13. Comparisons of Constitutive Models for Steel Over a Wide Range of Temperatures and Strain Rates10.1115/1.4006171 ↗
14. Taylor's Test Technique for Dynamic Characterization of Materials: Application to Brass
15. The Use of Flat-Ended Projectiles for Determining Dynamic Yield Stress I. Theoretical Considerations10.1098/rspa.1948.0081 ↗
16. Impact of Cylinders on a Rigid Boundary10.1063/1.1662328 ↗
17. An Elementary Theory for the Taylor Impact Test
18. Validation of the Klepaczko-Malinowski Model for Friction Correction and Recommendation on Split Hopkinson Pressure Bar10.1016/j.finel.2011.05.006 ↗
19. Flow Stress of f.c.c. Polycrystals With Application to OFHC Cu10.1016/S1359-6454(97)00230-9 ↗
20. Modeling Temperature and Strain Rate History Effects in OFHC Copper10.1016/S0749-6419(98)00062-X ↗
21. The Influence of Crystal Structure on the Dynamic Behavior of Materials at High Temperatures10.1016/S0749-6419(03)00037-8 ↗
22. Thermodynamic Consistent Formulations of Viscoplastic Deformations in FCC Metals10.1061/(ASCE)0733-9399(2007)133:1(76) ↗
23. A Thermo-Viscoplastic Constitutive Model for FCC Metals With Application to OFHC Copper10.1016/j.ijmecsci.2009.07.001 ↗
24. Nonbasal Deformation Modes of HCP Metals and Alloys: Role of Dislocation Source and Mobility10.1007/s11661-002-0150-1 ↗
25. Realistic Constitutive Relations for Metal Plasticity
26. Constitutive Modeling of the Mechanical Behavior of High Strength Ferritic Steels for Static and Dynamic Applications10.1007/s11043-010-9112-y ↗
27. Constitutive Modeling of Nitrogen-Alloyed Austenitic Stainless Steel at Low and High Strain Rates and Temperatures10.1016/j.mechmat.2014.07.007 ↗
28. Implicit Algorithm for Finite Deformation Hypoelasto-Viscoplasticity in FCC Metals10.1002/nme.1655 ↗
29. Physically Based Multiscale-Viscoplastic Model for Metals and Steel Alloys: Theory and Computation
30. Plastic Work and Heat Generated During Plastic Deformation of a High Strength Steel10.1016/j.matdes.2008.04.048 ↗
31. Nonlinear Finite Element Modeling of Dynamic Localizations in High Strength Steel Columns Under Impact10.1016/j.ijimpeng.2012.10.006 ↗
32. abaqus, Reference Manual
33. Pertinence de l'essaid'impact du cylindre de Taylor pour laprévision du comportement balistique des aciers à blindage
34. Influence of Interfacial Friction and Specimen Configuration in Split Hopkinson Pressure Bar System10.1016/j.triboint.2015.04.002 ↗