Thermally Grown Oxide Stress in PS-PVD and EB-PVD Thermal Barrier Coatings Observed at Various Lifetimes Via Synchrotron X-ray Diffraction
Source abstract
Abstract
Abstract The current standard application method for thermal barrier coatings (TBCs) on turbine blades for jet engines is electron-beam physical vapor deposition (EB-PVD) due to its high strain tolerance and low thermal conductivity. An emerging deposition method, plasma-spray physical vapor deposition (PS-PVD), presents an opportunity for a tailorable microstructure, and non-line-of-sight deposition that is faster and less expensive. To compare the lifetime behavior of both PS-PVD and EB-PVD coatings, samples subjected to 300 and 600 thermal cycles were measured during a 1 h thermal cycle to determine the strains, which were converted to stress, in the thermally grown oxide (TGO) layer of the TBCs using synchrotron X-ray diffraction (XRD). Room temperature XRD measurements indicated among samples that PS-PVD coatings experienced greater variation in in-plane room temperature strain in the TGO after cycling than the EB-PVD coatings. In-situ XRD measurements indicated similar high-temperature strain and no spallation after 600 thermal cycles for both coatings. Microscopy imaging after cycling showed greater rumpling in PS-PVD coatings that led to different failure modes between the two coatings’ TGO layers. The tailorability of PS-PVD coatings allows for adjustments in the processing parameters to improve their overall performance after aging and bridge the differences between the two deposition methods.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Central Florida Department of Mechanical and, Aerospace Engineering, , Orlando, FL 32816
University of Central Florida Department of Materials Science and Engineering, , Orlando, FL 32816
Argonne National Laboratory X-ray Science Division, , Lemont, IL 60439
Praxair Surface Technologies, Inc. , Indianapolis, IN 46222
NASA Glenn Research Center Materials and Structures Division, , Cleveland, OH 44135
References (69)
Show source-provided references
1. Materials Design for the Next Generation Thermal Barrier Coatings10.1146/annurev.matsci.33.011403.113718 ↗
2. Mechanisms of Spallation of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings With and Without Platinum Aluminide Bond Coat Ridges10.1016/S0257-8972(00)00891-4 ↗
3. Failure Modes in Plasma-Sprayed Thermal Barrier Coatings10.1016/S0921-5093(02)00251-4 ↗
4. Thermal Cycling of EB-PVD TBCs Based on YSZ Ceramic Coat and Diffusion Aluminide Bond Coat10.1016/j.jallcom.2021.159720 ↗
5. Stress Development in Alumina Scales Formed up on Oxidation of (111) Nial Single Crystals10.1016/S0010-938X(97)83344-6 ↗
6. Growth Strains in Thermally Grown Al2O3 Scales Studied Using Synchrotron Radiation10.1007/s11837-009-0103-x ↗
7. Microstructural Study of the Theta-Alpha Transformation in Alumina Scales Formed on Nickel-Aluminides10.1179/mht.2000.011 ↗
8. Evolution of Stress and Morphology in Thermal Barrier Coatings10.1016/j.surfcoat.2010.04.065 ↗
9. Characterization of Microstructure and Thermal Properties of YSZ Coatings Obtained by Axial Suspension Plasma Spraying (ASPS)10.1007/s11666-015-0263-x ↗
10. Sintering and Creep Processes in Plasma-Sprayed Thermal Barrier Coatings10.1361/10599630420434 ↗
11. Columnar Thermal Barrier Coatings Produced by Different Thermal Spray Processes10.1007/s11666-021-01228-5 ↗
12. Growth Strains and Creep in Thermally Grown Alumina: Oxide Growth Mechanisms10.1063/1.3009973 ↗
13. On TGO Creep and the Initiation of a Class of Fatigue Cracks in Thermal Barrier Coatings10.1016/j.surfcoat.2009.05.018 ↗
14. Role of Mechanical Loads in Inducing in-Cycle Tensile Stress in Thermally Grown Oxide10.1063/1.3692592 ↗
15. Evolution of Residual Stresses in PS-PVD Thermal Barrier Coatings on Thermal Cycling10.1007/s11666-018-0734-y ↗
16. Deposition Behavior of PSPVD Yttria Partially Stabilized Zirconia Coatings10.1007/s11666-021-01196-w ↗
17. Stress Variation With Thermal Cycling in the Thermally Grown Oxide of an EB-PVD Thermal Barrier Coating10.1016/S0257-8972(03)00858-2 ↗
18. Photoluminescence Piezospectroscopy: A Multi-purpose Quality Control and NDI Technique for Thermal Barrier Coatings10.1111/j.1744-7402.2004.tb00183.x ↗
19. Effect of Temperature on Rumpling and Thermally Grown Oxide Stress in an EB-PVD Thermal Barrier Coating10.1016/j.surfcoat.2006.07.212 ↗
20. Thermal Barrier Coatings for Aircraft Engines: History and Directions10.1007/BF02646310 ↗
21. Mechanics-Based Scaling Laws for the Durability of Thermal Barrier Coatings10.1016/S0079-6425(00)00007-4 ↗
22. Review on Advanced EB-PVD Ceramic Topcoats for TBC Applications10.1111/j.1744-7402.2004.tb00182.x ↗
23. Phosphor Thermometry Instrumentation for Synchronized Acquisition of Luminescence Lifetime Decay and Intensity on Thermal Barrier Coatings10.1088/1361-6501/ab64ac ↗
24. Doped 8% Yttria Stabilized Zirconia for Temperature Measurements on Thermal Barrier Coatings Using Phosphor Thermometry10.2514/6.2020-0631 ↗
25. Piezospectroscopic Evaluation and Damage Identification for Thermal Barrier Coatings Subjected to Simulated Engine Environments10.1016/j.surfcoat.2016.09.057 ↗
26. Modeling Luminescence Behavior for Phosphor Thermometry Applied to Doped Thermal Barrier Coating Configurations10.1364/AO.58.000D68 ↗
27. Oxidation Performance of si-hfo2 Environmental Barrier Coating Bond Coats Deposited Via Plasma Spray-Physical Vapor Deposition10.1016/j.surfcoat.2019.125311 ↗
28. Vapor Phase Deposition Using Plasma Spray-PVD10.1007/s11666-009-9428-9 ↗
29. Columnar-Structured Thermal Barrier Coatings (TBCs) by Thin Film Low-Pressure Plasma Spraying (Lpps-tf)10.1007/s11666-010-9549-1 ↗
30. Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings10.1002/9781118095232.ch7 ↗
31. New Surfaces For A New Millennium
32. Microstructural Effects and Properties of Non-Line-of-Sight Coating Processing Via Plasma Spray-Physical Vapor Deposition10.1007/s11666-017-0570-5 ↗
33. Lpps Thin Film: A Hybrid Coating Technology Between Thermal Spray and PVD for Functional Thin Coatings and Large Area Applications
34. Atmospheric Plasma Sprayed Thermal Barrier Coatings With High Segmentation Crack Densities: Spraying Process, Microstructure and Thermal Cycling Behavior10.1016/j.surfcoat.2011.06.032 ↗
35. Coatings With Columnar Microstructures for Thermal Barrier Applications10.1002/adem.201900988 ↗
36. Improved Thermal Cycling Durability of Thermal Barrier Coatings Manufactured by PS-PVD10.1007/s11666-013-9971-2 ↗
37. Investigation of the Resistance of Opencolumn-Structured PS-PVD TBCS to Erosive and High-Temperature Corrosive Attack10.1016/j.surfcoat.2017.05.003 ↗
38. Mechanism of Spallation in Platinum Aluminide/Electron Beam Physical Vapor-Deposited Thermal Barrier Coatings10.1007/s11661-999-0332-1 ↗
39. Comparison of Electron-Beam Physical Vapor Deposition and Plasma-Spray Physical Vapor Deposition Thermal Barrier Coating Properties Using Synchrotron X-ray Diffraction10.1115/GT2019-90828 ↗
40. Comparison of Thermally Cycled PS-PVD and EB-PVD Thermal Barrier Coatings’ Depth-Resolved Monoclinic Phase Evolution Via Synchrotron X-ray Diffraction
41. Strain and Texture Analysis of Coatings Using High-Energy X-rays10.1063/1.1582351 ↗
42. Hauk · 1997
43. The Measurement of Residual Strains Within Thermal Barrier Coatings Using High-Energy X-ray Diffraction10.1111/j.1551-2916.2005.00331.x ↗
44. Through-Thickness Determination of Phase Composition and Residual Stresses in Thermal Barrier Coatings Using High-Energy X-rays10.1016/j.actamat.2009.10.010 ↗
45. The Influence of the Reactive Element Yttrium on the Stress in Alumina Scales Formed by Oxidation10.1016/S1359-6454(96)00258-3 ↗
46. Substrate and Bond Coat Compositions: Factors Affecting Alumina Scale Adhesion10.1016/S0921-5093(97)00851-4 ↗
47. Investigation of TGO Stress in Thermally Cycled Plasma-Spray Physical Vapor Deposition and Electron-Beam Physical Vapor Deposition Thermal Barrier Coatings Via Photoluminescence Spectroscopy10.1016/j.surfcoat.2019.125047 ↗
48. Stresses Within Rare-Earth Doped Yttria-Stabilized Zirconia Thermal Barrier Coatings From In-Situ Synchrotron X-ray Diffraction at High Temperatures10.1016/j.surfcoat.2022.128647 ↗
49. High-Energy X-ray Phase Analysis of Cmas-Infiltrated 7ysz Thermal Barrier Coatings: Effect of Time and Temperature10.1557/jmr.2020.212 ↗
50. Strain Response of Thermal Barrier Coatings Captured Under Extreme Engine Environments Through Synchrotron X-ray Diffraction10.1038/ncomms5559 ↗
51. Monitoring Local Strain in a Thermal Barrier Coating System Under Thermal Mechanical Gas Turbine Operating Conditions10.1007/s11837-015-1399-3 ↗
52. Capturing the Competing Influence of Thermal and Mechanical Loads on the Strain of Turbine Blade Coatings Via High Energy X-rays10.3390/coatings8090320 ↗
53. Synchrotron X-ray Measurement Techniques for Thermal Barrier Coated Cylindrical Samples Under Thermal Gradients10.1063/1.4817543 ↗
54. Synchrotron X-ray Diffraction Measurements Mapping Internal Strains of Thermal Barrier Coatings During Thermal Gradient Mechanical Fatigue Loading10.1115/1.4029480 ↗
55. Internal Strains and Stresses Measured in Cortical Bone Via High-Energy X-ray Diffraction10.1016/j.jsb.2005.08.003 ↗
56. Introduction to Two-Dimensional X-ray Diffraction10.1154/1.1577355 ↗
57. In Situ Synchrotron Measurements of Oxide Growth Strains10.4028/www.scientific.net/msf.490-491.287 ↗
58. Temperature-Dependent Elastic Stiffness Constants of α-and θ-Al2O3 From First-Principles Calculations10.1088/0953-8984/22/37/375403 ↗
59. Deccalc—A Program for the Calculation of Diffraction Elastic Constants From Single Crystal Coefficients
60. Noyan · 2013
61. Residual Stress Measurement in Textured Thin Film by Grazing Incidence X-ray Diffraction10.1016/S0040-6090(02)00680-6 ↗
62. Residual Stress Gradients in α-Al2O3 Hard Coatings Determined by Pencil-Beam X-ray Nanodiffraction: The Influence of Blasting Media10.1016/j.surfcoat.2014.12.028 ↗
63. Oxidation-Induced Failure of EB-PVD Thermal Barrier Coatings10.1016/S0257-8972(01)01482-7 ↗
64. The Effect of Morphology of Thermally Grown Oxide on the Stress Field in a Turbine Blade With Thermal Barrier Coatings10.1016/j.surfcoat.2015.06.061 ↗
65. Quantifying Thermal Barrier Coating Delamination Through Luminescence Modeling10.1016/j.surfcoat.2020.126153 ↗
66. Parametric Studies of Failure Mechanisms in Elastic EB-PVD Thermal Barrier Coatings Using FEM10.1016/j.ijsolstr.2005.07.037 ↗
67. Correlation Between Spraying Conditions and Microcrack Density and Their Influence on Thermal Cycling Life of Thermal Barrier Coatings10.1361/10599630420443 ↗
68. Thermal Barrier Coatings for Gas-Turbine Engine Applications10.1126/science.1068609 ↗
69. Environmental Stability of the YSZ Layer and the YSZ/TGO Interface of an In-Service EB-PVD Coated High-Pressure Turbine Blade10.1007/s10853-008-3215-8 ↗