Investigating Discrepancies in Vibration Bending Fatigue Behavior of Additively Manufactured Titanium 6Al-4V
Source abstract
Abstract
The vibration bending fatigue life uncertainty of additively manufactured titanium (Ti) 6Al-4V specimens is studied. In this investigation, an analysis of microscopic discrepancies between ten fatigued specimens paired by stress amplitude is correlated with the bending fatigue life scatter. Through scanning electron microscope (SEM) analysis of fracture surfaces and grain structures, anomalies and distinctions such as voids and grain geometries are identified in each specimen. These data along with previously published results are used to support assessments regarding bending fatigue uncertainty. The understanding gained from this study is important for the future development of a predictive vibration bending fatigue life model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mem. ASME Air Force Research Laboratory, Aerospace Systems Directorate, Wright-Patterson AFB, OH 45433 e-mails: ;
Mem. ASME Air Force Research Laboratory, Aerospace Systems Directorate, Wright-Patterson AFB, OH 45433 e-mail:
Mem. ASME Perceptive Engineering Analytics, LLC, Minneapolis, MN 55418 e-mail:
References (46)
Show source-provided references
1. ASTM F2924-14 · 2014
2. ASTM F2971-13 · 2013
3. ASTM F3049-14 · 2014
4. Optimization of the Design of Recuperative Heat Exchangers in the Exhaust Nozzle of an Aero Engine10.1016/j.apm.2006.10.008 ↗
5. Sunden · 2013 · 22410.1533/9780857096067.2.224 ↗
6. Optimal Design of Compact Recuperators for Microturbine Application10.1016/j.applthermaleng.2005.01.015 ↗
7. Thermal Design and Model Analysis of the swiss-Roll Recuperator for an Innovative Micro Gas Turbine10.1016/j.applthermaleng.2008.06.029 ↗
8. Engine Structural Integrity Program (ENSIP)
9. As-Built Geometry and Surface Finish Effects on Fatigue and Tensile Properties of Laser Fused Titanium 6Al-4V10.1115/GT2017-63482 ↗
10. Nicholas · 2006
11. Development of a Novel Vibration-Based Fatigue Testing Methodology10.1016/j.ijfatigue.2003.10.012 ↗
12. Regression Study on Variables Affecting Vibration Fatigue Behavior of Additive Manufactured Titanium 6Al-4V10.1115/GT2017-64049 ↗
13. Investigation of Surface Roughness Effects on Material Behavior of Additive Manufactured Titanium 6Al-4V
14. Geometric Deviation and the Effect on Fatigue Life of Additive Manufactured Titanium 6Al-4V
15. Scott-Emuakpor · 2016 · 21
16. Metallic Materials Properties Development and Standardization
17. A New Multiaxial Fatigue Testing Method for Variable Amplitude Loading and Stress Ratio10.1115/1.1788687 ↗
18. Vibration-Based Bending Fatigue of a Hybrid Insert-Plate System10.1007/s11340-015-0004-6 ↗
19. An Energy-Based Uniaxial Fatigue Life Prediction Method for Commonly Used Gas Turbine Engine Materials10.1115/1.2943152 ↗
20. Bending Fatigue Life Characterization of Direct Metal Laser Sintering Nickel Alloy 71810.1111/ffe.12286 ↗
21. Fatigue Crack Growth Behavior of Structures Subject to Vibratory Stresses
22. Material Property Determination of Vibration Fatigued DMLS and Cold-Rolled Nickel Alloys10.1115/GT2014-26247 ↗
23. A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue10.1520/STP14974S ↗
24. Validation of the Step Test Method for Generating Haigh Diagrams for Ti-6Al-4V10.1016/S0142-1123(99)00032-8 ↗
25. A New Distortion Energy-Based Equivalent Stress for Multiaxial Fatigue Life Prediction10.1016/j.ijnonlinmec.2011.12.002 ↗
26. Investigation of the Effect of Process Parameters on the Formation and Characteristics of Recast Layer in Wire-EDM of Inconel 71810.1016/j.msea.2009.01.061 ↗
27. Uncertainties of an Automated Optical 3D Geometry Measurement Modeling and Analysis Process for Mistuned IBR Reverse Engineering10.1115/GT2013-95320 ↗
28. Experimental Validation of a Mesh Quality Optimized Morphed Geometric Mistuning Model10.1115/GT2015-43150 ↗
29. Thurstone · 1947
30. Multiple Factor Analysis: Principal Component Analysis for Multitable and Multiblock Data Sets10.1002/wics.1246 ↗
31. A Fleet Risk Prediction Methodology for Mistuned IBRs Using Geometric Mistuning Models10.2514/6.2015-1144 ↗
32. Ugural · 2003
33. Shigley · 1989
34. Anderson · 200510.1201/9781420058215 ↗
35. Pilkey · 2008
36. Fatigue Notch Sensitivity of Some Aluminum Alloys10.6028/jres.052.032 ↗
37. Extension of a Probabilistic Mesomechanics Based Model for Fatigue Notch Factor to Titanium Alloy Components
38. Fatigue and Static Strength of Notched and Unnotched Aluminum-Alloy and Steel Specimens10.1007/BF02326137 ↗
39. Fatigue Behaviour of Notched Additive Manufactured Ti6Al4V With As-Built Surfaces10.1016/j.ijfatigue.2017.04.009 ↗
40. Notch Size Effects in HCF Behavior of Ti-6Al-4V10.1016/S0142-1123(99)00023-7 ↗
41. Fatigue and Strength Studies of Titanium 6Al-4V Fabricated by Direct Metal Laser Sintering10.1115/1.4031271 ↗
42. Volume 19: Fatigue and Fracture
43. The Role of Grain Boundaries on Fatigue Crack Initiation—An Energy Approach10.1016/j.ijplas.2010.09.009 ↗
44. Predicting Tensile Properties of Ti-6Al-4V Produced via Directed Energy Deposition10.1016/j.actamat.2017.05.025 ↗
45. Mixed-Mode, High-Cycle Fatigue-Crack Growth Thresholds in Ti-6Al-4V: Role of Small Cracks10.1016/S0142-1123(02)00020-8 ↗
46. Marcus · 1999 · 165110.1007/978-1-4615-4791-4_211 ↗