journal article·2020-07-01

Influence of Assumed Strain Hardening Relation on Plastic Stress-Strain Response Identification From Conical Indentation

Yupeng Zhang, Alan Needleman

Publisher page

Abstract

Abstract Instrumented indentation tests provide an attractive means for obtaining data to characterize the plastic response of engineering materials. One difficulty in doing this is that the relation between the measured indentation force versus indentation depth response and the plastic stress-strain response is not unique. Materials with very different uniaxial stress-strain curves can give essentially identical curves of indentation force versus indentation depth. Zhang et al. (2019, “Identification of Plastic Properties From Conical Indentation Using a Bayesian-Type Statistical Approach,” ASME J. Appl. Mech., 86, p. 011002) numerically generated “experimental” conical indentation data and showed that using surface profile data and indentation force versus indentation depth data together with a Bayesian-type statistical analysis permitted the uniaxial plastic stress-strain response to be identified even for materials with indistinguishable indentation force versus indentation depth curves. The same form of hardening relation was used in the identification process as was used to generate the “experimental” data. Generally, a variety of power law expressions have been used to characterize the uniaxial plastic stress-strain response of engineering materials, and, of course, the form that gives the best fit for a material is not known a priori. Here, we use the same Bayesian statistics-based analysis but consider four characterizations of the plastic uniaxial stress-strain response and show that the identification of the hardening relation parameters and the associated uniaxial stress-strain response is not very sensitive to the form of the power law strain hardening relation chosen even with data that have significant noise.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, Texas A&M University, College Station, TX 77843

References (24)

Show source-provided references
1. Can Stress-Strain Relationships Be Obtained From Indentation Curves Using Conical and Pyramidal Indenters?10.1557/JMR.1999.0472 ↗
2. A Study on the Determination of Mechanical Properties of a Power Law Material by Its Indentation Force-Depth Curve10.1080/14786430600640528 ↗
3. On the Uniqueness of Measuring Elastoplastic Properties From Indentation: The Indistinguishable Mystical Materials10.1016/j.jmps.2007.01.010 ↗
4. Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation10.1016/S1359-6454(01)00295-6 ↗
5. Determination of Plastic Properties of Metals by Instrumented Indentation Using Different Sharp Indenters10.1016/S1359-6454(02)00568-2 ↗
6. A New Method to Extract the Plastic Properties of Metal Materials From an Instrumented Spherical Indentation Loading Curve10.1016/j.actamat.2004.05.018 ↗
7. Representative Strain of Indentation Analysis10.1557/JMR.2005.0280 ↗
8. Scaling Approach to Conical Indentation in Elastic-Plastic Solids With Work Hardening10.1063/1.368196 ↗
9. Evaluation of the Stress-Strain Curve of Metallic Materials by Spherical Indentation10.1016/j.ijsolstr.2005.06.068 ↗
10. A Study on the Determination of Plastic Properties of Metals by Instrumented Indentation Using Two Sharp Indenters10.1016/j.ijsolstr.2007.01.029 ↗
11. Extracting Elastic-Plastic Properties From Experimental Loading-Unloading Indentation Curves Using Different Optimization Techniques10.1016/j.ijmecsci.2018.05.043 ↗
12. Determination of Constitutive Properties From Spherical Indentation Data Using Neural Networks. Part I: The Case of Pure Kinematic Hardening in Plasticity Laws10.1016/S0022-5096(98)00109-4 ↗
13. Identification of Plastic Properties From Conical Indentation Using a Bayesian-Type Statistical Approach10.1115/1.4041352 ↗
14. Yield Behavior Beneath Hardness Indentations in Ductile Metals, Measured by Three-Dimensional Computed X-Ray Tomography and Digital Volume Correlation10.1016/j.actamat.2014.08.046 ↗
15. Identification of Material Properties Using Indentation Test and Shape Manifold Learning Approach10.1016/j.cma.2015.09.004 ↗
16. Quantifying Yield Behaviour in Metals by X-Ray Nanotomography10.1038/srep34346 ↗
17. Identification of Elastic-Plastic Properties of Metal Materials by Using the Residual Imprint of Spherical Indentation10.1016/j.msea.2016.10.025 ↗
18. A Holistic Inverse Approach Based on a Multi-Objective Function Optimisation Model to Recover Elastic-Plastic Properties of Materials From the Depth-Sensing Indentation Test10.1016/j.jmps.2019.04.001 ↗
19. Determining Constitutive Models From Conical Indentation: Sensitivity Analysis10.1557/JMR.2003.0113 ↗
20. Identification of Plastic Properties of Metal Materials Using Spherical Indentation Experiment and Bayesian Model Updating Approach10.1016/j.ijmecsci.2018.12.027 ↗
21. Simulia
22. MATLAB Release 2016a, function normrnd
23. Postbifurcation Behavior and Imperfection Sensitivity of Elastic-Plastic Circular Plates10.1016/0020-7403(75)90058-2 ↗
24. Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures10.1016/0013-7944(85)90052-9 ↗