journal article·2021-10-01

Modeling the Creep of Nickel

Rolf Sandström, Jing Zhang

Publisher page

Abstract

Abstract Many metals and alloys have a stress exponent for the creep rate that is considerably higher than the value of three that is typically predicted by creep recovery models. One example is pure Ni. Creep data from Norman and Duran that are analyzed in the paper give a stress exponent of about seven in the temperature range 0.3–0.55 of the melting point. It has recently been shown that the high creep exponent of Al and Cu in the power-law breakdown regime can be explained by the presence of strain-induced vacancies. By applying a creep recovery model that does not involve adjustable parameters, it is shown that strain-induced vacancies can also explain the high-stress exponent of pure nickel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, KTH Royal Institute of Technology, Stockholm SE-100 44, Sweden

Funding

China Scholarship Council

References (34)

Show source-provided references
1. Dislocation Mechanisms in Creep10.1179/imtlr.1972.17.1.130 ↗
2. Does the “Natural” Third Power Law of Steady State Creep Hold for Pure Aluminium?10.1016/0956-716X(90)90036-G ↗
3. Mechanical Behavior of Crystalline Solids at Elevated Temperature10.1016/0079-6425(68)90024-8 ↗
4. Comparison of Low Stress Creep Properties of Ferritic and Austenitic Creep Resistant Steels10.1016/S0921-5093(01)00943-1 ↗
5. High Temperature Creep of Sanicro 25 Austenitic Steel at Low Stresses10.1016/j.msea.2018.02.095 ↗
6. Steady-State Creep of Pure Polycrystalline Nickel From 0.3 to 0.55 Tm10.1016/0001-6160(70)90102-1 ↗
7. Basic Model for Primary and Secondary Creep in Copper10.1016/j.actamat.2011.09.052 ↗
8. Sandström · 2017
9. Hirth · 1982
10. The Effect of Vacancy Generation on Plastic Deformation10.1016/0036-9748(80)90295-1 ↗
11. Basic Creep Modelling of Aluminium10.1016/j.msea.2017.11.053 ↗
12. Creep in Phosphorus Alloyed Copper During Power-Law Breakdown10.1016/j.jnucmat.2007.02.005 ↗
13. The Role of Creep in Stress Strain Curves for Copper10.1016/j.jnucmat.2011.12.012 ↗
14. Climb of Extended Edge Dislocations10.1016/0001-6160(81)90156-5 ↗
15. Basic Modelling of Tertiary Creep of Copper10.1007/s10853-017-1968-7 ↗
16. First-principles Evaluation of the Effect of Alloying Elements on the Lattice Parameter of a 23Cr25NiWCuCo Austenitic Stainless Steel to Model Solid Solution Hardening Contribution to the Creep Strength10.1016/j.msea.2014.12.057 ↗
17. Creep Strength Contribution due to Precipitation Hardening in Copper–Cobalt Alloys10.1007/s10853-018-2922-z ↗
18. Basic Modelling of Creep Rupture in Austenitic Stainless Steels10.1016/j.tafmec.2017.02.004 ↗
19. Precipitation Evolution and Creep Strength Modelling of 25Cr20NiNbN Austenitic Steel10.1179/1878641315Y.0000000007 ↗
20. Influence of Pipe Diffusion on the Creep of Fine-Grained Materials10.1016/0025-5416(81)90100-2 ↗
21. Blum · 1985 · 83
22. Threshold Stresses in Materials Containing Dispersed Particles10.1016/0036-9748(82)90484-7 ↗
23. Pinning of Dislocations on the Departure Side of Strengthening Dispersoids10.1016/0036-9748(83)90333-2 ↗
24. Weak Beam Studies of Dislocation/Dispersoid Interaction in an Ods Superalloy10.1016/0036-9748(85)90022-5 ↗
25. Is Pipe Diffusion in Metals Vacancy Controlled? A Molecular Dynamics Study of an Edge Dislocation in Copper10.1103/PhysRevLett.63.628 ↗
26. A Molecular Dynamics Study of Self-diffusion in the Cores of Screw and Edge Dislocations in Aluminum10.1016/j.actamat.2009.07.048 ↗
27. Mechanism of Intrinsic Diffusion in the Core of Screw Dislocations in FCC Metals—A Molecular Dynamics Study10.1016/j.commatsci.2017.11.048 ↗
28. Development of a Diffusion Mobility Database for Ni-Base Superalloys10.1016/S1359-6454(01)00383-4 ↗
29. Elastic Properties of Metals and Alloys, I. Iron, Nickel, and Iron-Nickel Alloys10.1063/1.3253127 ↗
30. Measurement of Structural Parameters Important in Creep of Ni-Mo and Ni-W Solid Solutions10.1007/BF02647839 ↗
31. Lattice Parameters of Ni(γ), Ni3Al(γ') and Ni3Ga(γ') Solid Solutions With Additions of Transition and B-Subgroup Elements10.1016/0001-6160(85)90211-1 ↗
32. The High-Temperature Creep Behavior of Nickel-Rich Ni-W Solid Solutions10.1007/BF02647673 ↗
33. Review of Experimental Observations and Theoretical Models of Dislocation Cells and Subgrains
34. Dieter · 1986