journal article·2022-01-01

An Experimental and Numerical Study of Quenching-Induced Residual Stresses Under the Effect of Dynamic Strain Aging in an IN718 Superalloy Disc

Run-Hua Song, Hai-Long Qin, Dong-Feng Li, Zhong-Nan Bi, Esteban P. Busso, Hong-Yao Yu, Xiao-Long Liu, Jin-hui Du, Ji Zhang

Publisher page

Abstract

Abstract The effects of dynamic strain aging (DSA) on residual stresses generated in Ni-base superalloys during heat treatments are not well understood. In this study, the residual stress field induced by water quenching an IN718 disc while undergoing DSA is studied using coupled thermo-mechanical finite element (FE) analyses in conjunction with neutron diffraction (ND) measurements. A visco-plastic constitutive model that incorporates the effect of DSA is proposed to describe the experimentally observed negative strain rate sensitivity and abnormal temperature dependence phenomena in the stress–strain response of solid solution treated IN718. The predicted quenching residual stresses in the disc agree well with the ND measurements. Due to the DSA, a propagating high plastic strain rate region can be identified in the disc during the early stages of the quenching process. Due to the negative strain rate sensitivity and abnormal temperature dependence effects caused by DSA, the predicted residual stresses are approximately 10% greater than when those two effects are not accounted for. The effects of different convection heat transfer conditions in the FE model are examined and discussed. It is found that the convection heat transfer coefficients have a great influence both on the disc residual stresses and DSA-related plastic strain rate field predictions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Science, Harbin Institute of Technology, Shenzhen 518055, China

Beijing Key Laboratory of Advanced High Temperature Materials, Central Iron and Steel Research Institute, Beijing 100081, China;

GAONA Aero Material Co., Ltd., Beijing 100081, China

Department of Nuclear Physics, China Institute of Atomic Energy, Beijing 102413, China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China · Shenzhen Municipal Science and Technology Innovation Council

References (39)

Show source-provided references
1. The Effectiveness of Direct Aging on Inconel 718 Forgings Produced at High Strain Rates as Obtained on a Screw Press
2. Influence of Stress on γ″‌ Precipitation Behavior in Inconel 718 During Aging10.1016/j.jallcom.2018.01.030 ↗
3. Stress Relaxation Behaviour in In718 Nickel Based Superalloy During Ageing Heat Treatments10.1016/j.msea.2017.09.116 ↗
4. In-Situ Residual Stress Analysis During Annealing Treatments Using Neutron Diffraction in Combination With a Novel Furnace Design10.1016/j.matdes.2016.07.078 ↗
5. Assessment of the Stress-Oriented Precipitation Hardening Designed by Interior Residual Stress During Ageing in In718 Superalloy10.1016/j.msea.2018.05.016 ↗
6. Diffraction in Neutron Imaging a Review10.1016/j.nima.2017.07.040 ↗
7. Characterization and Modeling of Quenching-Induced Residual Stresses in the Nickel-Based Superalloy In71810.1007/s11661-004-0079-7 ↗
8. Characterization of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparison to Finite Element Modeling10.1016/j.msea.2006.04.049 ↗
9. Stress Relaxation Through Ageing Heat Treatment—A Comparison Between In Situ and Ex Situ Neutron Diffraction Techniques10.1016/j.crhy.2011.10.020 ↗
10. In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings10.1007/s11661-019-05302-0 ↗
11. Study on the Evolution of Residual Stress During Ageing Treatment in a Gh4169 Alloy Disk
12. Residual Stress Evolution and Its Mechanism During the Manufacture of Superalloy Disk Forgings
13. Residual Stress Measurements in a Thick, Dissimilar Aluminum Alloy Friction Stir Weld10.1016/j.actamat.2006.04.034 ↗
14. On the Evolution of Local Material Properties and Residual Stress in a Three-Pass Sa508 Steel Weld10.1016/j.actamat.2012.03.022 ↗
15. Through-Thickness Distributions of Residual Stresses in Two Extreme Heat-Input Thick Welds: A Neutron Diffraction, Contour Method and Deep Hole Drilling Study10.1016/j.actamat.2013.02.034 ↗
16. Residual Stresses in a Quenched Superalloy Turbine Disc: Measurements and Modeling10.1007/s11661-006-0017-y ↗
17. Characterization of Residual Stresses in Compressor Discs for Aeroengines: Neutron Diffraction and Finite Element Simulations
18. Multi-Scale Experiment and Simulation of Dynamic Strain Ageing Effect in Inconel 718 Superalloy
19. Residual Stress Distribution in Ni-Based Superalloy Turbine Discs During Fabrication Evaluated by Neutron/x-Ray Diffraction Measurement and Thermomechanical Simulation10.1016/j.matdes.2019.107603 ↗
20. Experimental and Numerical Investigations of Dynamic Strain Ageing Behaviour in Solid Solution Treated Inconel 718 Superalloy10.1108/EC-01-2020-0006 ↗
21. Theory of Flow Localisation Due to Dynamic Strain Ageing10.1016/0001-6160(88)90043-0 ↗
22. Activation Energy Calculations for Discontinuous Yielding in Inconel 718spf10.1016/S0921-5093(00)01470-2 ↗
23. The High-Temperature Bauschinger Effect in Alloy 718
24. Effect of Solution Treatment on the Microstructure and Mechanical Properties of In718 Alloy10.1016/S1875-5372(17)30197-2 ↗
25. Study of Precipitation-Assisted Stress Relaxation and Creep Behavior During the Ageing of a Nickel-Iron Superalloy10.1016/j.msea.2018.11.028 ↗
26. Determination of the High Temperature Elastic Properties and Diffraction Elastic Constants of Ni-Base Superalloys10.1016/j.matdes.2015.09.152 ↗
27. Calculation of Single-Crystal Elastic Constants for Cubic Crystal Symmetry From Powder Diffraction Data10.1107/S002188989800898X ↗
28. A Dislocation Mechanics-Based Crystallographic Model of a B2-Type Intermetallic Alloy10.1016/S0749-6419(95)00041-0 ↗
29. A Continuum Theory for Dynamic Recrystallization With Microstructure-Related Length Scales10.1016/S0749-6419(98)00008-4 ↗
30. On the Evolution of Lattice Deformation in Austenitic Stainless Steels the Role of Work Hardening at Finite Strains10.1016/j.jmps.2011.09.008 ↗
31. The Rate Dependence of the Portevin-le Chatelier Effect10.1016/0001-6160(88)90117-4 ↗
32. Geometrically Non-Linear Modeling of the Portevin–le Chatelier Effect10.1016/j.commatsci.2008.07.036 ↗
33. A Constitutive Model Accounting for Strain Ageing Effects on Work-Hardening. Application to a C–mn Steel10.1016/j.crme.2017.09.005 ↗
34. On the Calculation of Polycrystalline Elasticity Constants From Single Crystal Data
35. Anomalous Behaviors of a Single-Crystal Nickel-Base Superalloy Over a Wide Range of Temperatures and Strain Rates10.1016/j.mechmat.2015.11.015 ↗
36. The Influence of Quenchant Agitation on the Heat Transfer Coefficient and Residual Stress Development in the Quenching of Steels10.1243/0954405001518251 ↗
37. Effects of Dynamic Strain Aging on Strain Hardening Behavior, Dislocation Substructure, and Fracture Morphology in a Ferritic Stainless Steel10.1007/s11661-019-05574-6 ↗
38. Crystal Plasticity Based Investigation of Micro-Void Evolution Under Multi-Axial Loading Conditions10.1016/j.ijplas.2020.102673 ↗
39. Crystal Plasticity-Based Micromechanical Finite Element Modelling of Ductile Void Growth for an Aluminium Alloy Under Multiaxial Loading Conditions10.1177/0957650918772678 ↗