Tensile and Bending Behavior of Sintered Alloys: Experimental Results and Modeling
Source abstract
Abstract
Sintered materials show a different stress-strain behavior when subjected to tensile or compressive loading, the response to compression being characterized by a higher elastic modulus, yield stress, and strain hardening rate. These differences tend to make the bending behavior somewhat more complex to analyze, particularly in the elasto-plastic field, as compared to conventional materials, having equal mechanical properties under tension and compression. As a consequence, the use of widely applied test techniques, such as the Three Point Bending (TPB), becomes more difficult for sintered materials, due to the lack of reliable analytical models capable of evaluating elasto-plastic stress-strain distribution as a function of applied load and deflection. In the present investigation, the results of uniaxial tensile-compressive and bending tests conducted on sintered ferrous alloys characterized by different microstructures and porosity are reported and briefly discussed. Then an analytical model, specifically aimed to analyze the elasto-plastic monotonic behavior of a TPB specimen made with a material having different tensile and compressive properties, is presented. Its predictions as regards load-deflection curves and elasto-plastic stress-strain distributions are compared with the results of TPB tests and of numerical (Finite Element) analysis, showing a fairly good agreement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dipartimento di Costruzioni meccaniche e nucleari, University of Pisa Via Diotisalvi 2, 56126 Pisa, Italy
Dipartimento di Ingegneria dei materiali, University of Trento Via Mesiano 77, 38050 Trento, Italy
References (11)
Show source-provided references
1. Danninger H. , JanggG., WeissB., and SticklerR., 1993, “Microstructure and Mechanical Properties of Sintered Iron—Part I,” PMI, Vol. 25, No. 3, pp. 111–117.
2. Engstrom U. , AllrothS., 1986, “A Newly Developed Sintered High Strength Material,” Proc. of the 1986 Int. P/M Conference and Exibition: Horizons in Powder Metallurgy, Part I, pp. 1039–1048.
3. Fontanari, V., 1995, “Comportamento meccanico statico e ad impatto di acciai sinterizzati,” Ph.D. thesis in Materials Mechanics, University of Pisa.
4. Griffiths T. J. , 1983, “Reappraisal of Results of Transverse Rupture Tests for Hardmetals,” Powder Metallurgy, Vol. 26, No. 1, pp. 42–43.10.1179/pom.1983.26.1.42 ↗
5. Karlsson B. , and BertilssonI., 1982, “Mechanical Properties of Sintered Steels,” Scandinavian J. of Met., Vol. 11, pp. 267–275.
6. Kuhn, H. A., and Ferguson, B. L., 1990, Powder Forging, MPIF, Princeton, NJ.
7. Noguchi T. , 1990, “Bending of Gray Cast Iron,” J. of Testing and Evaluation, Vol. 18, No. 1, pp. 70–75.10.1520/JTE12453J ↗
8. Meyers, M. A., and Chawla, K. K., 1984, Mechanical Metallurgy: Principles and Applications, Prentice-Hall, pp. 559–570.
9. Spitzig W. A. , SmelserR. E., and RichmondO., 1988, “The Evolution of Damage and Fracture in Iron Compacts with Various Initial Porosities,” Acta Metall, Vol. 36, no. 5, pp. 1201–1211.10.1016/0001-6160(88)90273-8 ↗
10. Straffelini G. , FontanariV., and MolinariA., 1995, “Influence of Microstructure on Impact Behaviour of Sintered Ferrous Materials,” Powd. Met., Vol. 38, No, 1, pp. 45–51.10.1179/pom.1995.38.1.45 ↗
11. Vedula K. M. , and HeckelR. M., 1981, “Structure Property Relations for the Tensile Behaviour of Single Phase Ductile Sintered Materials,” Modern Dev. in Powd. Met., Vol. 12, pp. 759–777.