journal article·2017-07-01

On the Modeling of Fibers Embedding in Aluminum Using Ultrasonic Consolidation

Abba A. Abubakar, Shafique M. A. Khan, Samir Mekid

Publisher page

Abstract

Ultrasonic consolidation of fiber optics in metals is of major importance allowing surface embedding and protecting the fibers from exposure to open environment. The paper investigates the computational modeling of this process of embedding fibers at the aluminum subsurface. This new method provides an opportunity to develop sensory materials (Mekid et al., 2015, “Towards Sensor Array Materials: Can Failure be Delayed?” Sci. Technol. Adv. Mater., 16(3), p. 034607) and new types of nervous materials (Mekid and Kwon, 2009, “Nervous Materials: A New Approach for Better Control, Reliability and Safety of Structures,” Sci. Adv. Mater., 1(3), pp. 276–285) for structural health monitoring applications. A thermo-mechanical analysis of embedding SiC fiber in aluminum substrate has been conducted. The temperature distribution was obtained using a thermal model with process-dependent heat flux at the sonotrode/foil interface, which is coupled to the structural model in an iterative manner for simulating fiber embedment. The structural model uses a process-dependent plastic flow rule with an isotropic hardening model. A ductile damage model is employed for the first time in simulating such problems in addition to the use of real material properties of the fiber, which has resulted in better numerical results. Both of these factors help in determining the extent of damage particularly to the fiber/sensor being embedded. The experimental test has shown good agreement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Advanced Fiber Optic Sensors · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia e-mail:

Mem. ASME Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia e-mail:

References (28)

Show source-provided references
1. Fiber-Embedded Metallic Materials: From Sensing Towards Nervous Behavior10.3390/ma8115435 ↗
2. Nervous Materials: A New Approach for Better Control, Reliability and Safety of Structures10.1166/sam.2009.1055 ↗
3. Fiber-Embedded Metallic Materials: From Sensing Towards Nervous Behavior10.3390/ma8115435 ↗
4. Double-Twisted Conductive Smart Threads Comprising a Homogeneously and a Gradient-Coated Thread for Multidimensional Flexible Pressure-Sensing Devices10.1002/adfm.201670142 ↗
5. Phenomenological Considerations in Ultrasonic Welding
7. Mechanical Analysis of Ultrasonic Bonding for Rapid Prototyping10.1115/1.1459082 ↗
8. Mechanical Analysis of Ultrasonic Welding
9. Numerical Analysis of Ultrasonic Wire Bonding: Effects of Bonding Parameters on Contact Pressure and Frictional Energy10.1016/j.mechmat.2005.05.007 ↗
10. Numerical Analysis of Ultrasonic Wire Bonding—Part 2: Effects of Bonding Parameters on Temperature Rise10.1016/j.microrel.2007.01.083 ↗
11. Effect of Substrate Dimensions on Dynamics of Ultrasonic Consolidation10.1016/j.ultras.2010.04.005 ↗
12. A Thermo-Mechanical Finite Element Analysis of Acoustic Softening During Ultrasonic Consolidation of Aluminum Foils
13. Numerical Analysis of Deformation and Thermal Behavior During Ultrasonic Al Ribbon Bonding10.2207/qjjws.29.138s ↗
14. Takahashi, Y., Suzuki, S., Ohyama, Y., and Maeda, M., 2012, “Numerical Analysis of Interfacial Deformation and Temperature Rise During Ultrasonic Al Ribbon Bonding,” J. Phys.: Conf. Ser., 379(1), p. 012128.10.1088/1742-6596/379/1/01202810.1088/1742-6596/379/1/012028 ↗
15. Ultrasonic Consolidation for Embedding SMA Fibers Within Aluminum Matrices10.1016/j.compstruct.2004.04.064 ↗
16. Fabrication of Metal-Matrix Composites and Adaptive Composites Using Ultrasonic Consolidation Process10.1016/j.msea.2005.08.041 ↗
17. Smart Structure Sensors Based on Embedded Fiber Bragg Grating Arrays in Aluminum Alloy Matrix by Ultrasonic Consolidation10.1088/0957-0233/20/3/034013 ↗
18. Ultrasonic Embedding of Nickel-Coated Fiber Bragg Grating in Aluminum and Associated Sensing Characteristics10.1016/j.yofte.2011.09.004 ↗
19. Fibre Embedding in Aluminium Alloy 3003 Using Ultrasonic Consolidation Process–Thermo-Mechanical Analyses10.1007/s00170-010-3007-6 ↗
20. Finite Element Analysis of Ultrasonic Insertion of SiC Fibre in Aluminium Alloy 606110.1504/IJMATEI.2011.042876 ↗
21. A Thermomechanical Crystal Plasticity Constitutive Model for Ultrasonic Consolidation10.1016/j.commatsci.2011.07.023 ↗
22. ABAQUS Documentation
23. Thermomechanical Analyses of Ultrasonic Welding Process Using Thermal and Acoustic Softening Effects10.1016/j.mechmat.2008.06.004 ↗
24. Thermal Contact Resistance
25. Silicon Carbide, SiC Ceramic Properties
26. Ductile Failure Behavior of Polycrystalline Al 6061-T610.1007/s10704-012-9689-z ↗
27. 2004
28. Foresight Formulation in Innovative Production, Automation and Control Systems10.1108/14636680710821089 ↗