journal article·2017-10-01Open access

Constitutive Stiffness Characteristics of Cement Paste as a Multiphase Composite System—A Molecular Dynamics-Based Model

Ingrid M. Padilla Espinosa, Wayne Hodo, John S. Rivas Murillo, A. M. Rajendran, Ram V. Mohan

Abstract

Cement paste is a material with heterogeneous composite structure consisting of hydrated and unhydrated phases at all length scales that varies depending upon the degree of hydration. In this paper, a method to model cement paste as a multiphase system at molecular level for predicting constitutive properties and for understanding the constitutive mechanical behavior characteristics using molecular dynamics is presented. The proposed method creates a framework for molecular level models suitable for predicting constitutive properties of heterogeneous cement paste that could provide potential for comparisons with low length scale experimental characterization techniques. The molecular modeling method followed two approaches: one involving admixed molecular phases and the second involving clusters of the individual phases. In particular, in the present study, cement paste is represented as two-phase composite systems consisting of the calcium silicate hydrate (CSH) phase combined with unhydrated phases tricalcium silicate (C3S) or dicalcium silicate (C2S). Predicted elastic stiffness constants based on molecular model representations employed for the two phases showed that, although the individual phases have anisotropic characteristics, the composite system behaves as an isotropic material. The isotropic characteristics seen from two-phase molecular models mimic the isotropic material nature of heterogeneous cement paste at engineering scale. Further, predicted bulk modulus of the composite system based on molecular modeling is found to be high compared to the elastic modulus, which concurs with the high compression strength of cement paste seen at engineering length scales.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nanoengineering Department, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, 2907 E Gate City Boulevard, Greensboro, NC 27401 e-mail:

Engineering Research and Development Center, 3909 Halls Ferry Road, Vicksburg, MS 39180 e-mail:

Department of Mechanical Engineering, University of Mississippi, Oxford, MS 38677 e-mail:

Mem. ASME Nanoengineering Department, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, 2907 E Gate City Boulevard, Greensboro, NC 27401 e-mail:

Funding

Army Research Office

References (57)

Show source-provided references
1. Microstructure and Transport Properties of Concrete
2. Garboczi, E. J., and Bentz, D. P., 1998, “Concrete: A Multi-Scale Interactive Composite,” International RILEM Conference, Haifa, Israel, Mar. 8–12, pp. 43–50.http://ws680.nist.gov/publication/get_pdf.cfm?pub_id=860125
3. Multi-Scale Picture of Concrete and Its Transport Properties: Introduction for Non-Cement Researchers
4. Structure and Physical Properties of Hardened Portland Cement Paste10.1111/j.1151-2916.1958.tb13494.x ↗
5. 225R-99: Guide to the Selection and Use of Hydraulic Cements
6. 2006
7. The Nature of the Hydration Products in Hardened Cement Pastes10.1016/S0958-9465(99)00036-0 ↗
8. Characterisation of Cement Hydrate Phases by TEM, NMR and Raman Spectroscopy10.1680/adcr.2010.22.4.233 ↗
9. Nature of C-S-H in 20 Year Old Neat Ordinary Portland Cement and 10% Portland Cement-90% Ground Granulated Blast Furnace Slag Pastes10.1179/174367607X228106 ↗
10. 6—Hydration, Setting and Hardening of Portland Cement A2—Hewlett, Peter C.
11. 1997
12. Modeling the Linear Elastic Properties of Portland Cement Paste10.1016/j.cemconres.2005.05.001 ↗
13. A Multiscale Micromechanics-Hydration Model for the Early-Age Elastic Properties of Cement-Based Materials10.1016/S0008-8846(03)00039-5 ↗
14. Microstructure-Based Micromechanical Prediction of Elastic Properties in Hydrating Cement Paste10.1016/j.cemconres.2006.05.014 ↗
15. Modelling Elasticity of a Hydrating Cement Paste10.1016/j.cemconres.2007.07.003 ↗
16. Numerical Homogenization of Hardened Cement Paste10.1007/s00466-007-0211-9 ↗
17. Spherical and Acicular Representation of Hydrates in a Micromechanical Model for Cement Paste: Prediction of Early-Age Elasticity and Strength10.1007/s00707-008-0007-9 ↗
18. Association of Macroscopic Laboratory Testing and Micromechanics Modelling for the Evaluation of the Poroelastic Parameters of a Hardened Cement Paste10.1016/j.cemconres.2010.03.016 ↗
19. Analyses and Aodels of the Autogenous Shrinkage of Hardening Cement Paste—2: Modelling at Scale of Hydrating Grains10.1016/S0008-8846(96)00202-5 ↗
20. Representative Volume Element Based Modeling of Cementitious Materials10.1115/1.4025916 ↗
21. Determination by Nanoindentation of Elastic Modulus and Hardness of Pure Constituents of Portland Cement Clinker10.1016/S0008-8846(00)00505-6 ↗
22. The Effect of Two Types of C-S-H on the Elasticity of Cement-Based Materials: Results From Nanoindentation and Micromechanical Modeling10.1016/S0008-8846(03)00230-8 ↗
23. Swelling, Shrinkage and Creep: A Mechanical Approach to Cement Hydration10.1617/14161 ↗
24. Nanomechanical Properties of C-S-H Gel/Cement Grain Interface by Using Nanoindentation and Modulus Mapping10.1631/jzus.A1400166 ↗
25. Mapping of Mechanical Properties of Cement-Based Materials at Micro/Nano-Scale
26. On the Use of Nanoindentation for Cementitious Materials10.1007/BF02479557 ↗
27. Drying Shrinkage of Cement Paste as Measured in an Environmental Scanning Electron Microscope and Comparison With Microstructural Models10.1023/A:1018682404655 ↗
28. Density Functional Calculations of Elastic Properties of Portlandite, Ca(OH)(2)10.1016/j.cemconres.2004.07.036 ↗
29. Computation of Elastic Properties of Portland Cement Using Molecular Dynamics10.1061/(ASCE)NM.2153-5477.0000026 ↗
30. Force Field for Tricalcium Silicate and Insight Into Nanoscale Properties: Cleavage, Initial Hydration, and Adsorption of Organic Molecules10.1021/jp312815g ↗
31. Mechanical Properties of Calcium Silicate Hydrate (C–S–H) at Nano-Scale: A Molecular Dynamics Study10.1016/j.matchemphys.2014.04.001 ↗
32. A Realistic Molecular Model of Cement Hydrates10.1073/pnas.0902180106 ↗
33. Elastic Properties of the Main Species Present in Portland Cement Pastes10.1016/j.actamat.2008.12.007 ↗
34. Microscopic Physical Basis of the Poromechanical Behavior of Cement-Based Materials10.1007/BF02481622 ↗
35. Nano-Scale Investigation of Elastic Properties of Hydrated Cement Paste Constituents Using Molecular Dynamics Simulations10.1016/j.commatsci.2014.12.006 ↗
36. Proposed Structure for Calcium Silicate Hydrate Gel.10.1111/j.1151-2916.1986.tb07446.x ↗
37. Computational Modeling of Shear Deformation and Failure of Nanoscale Hydrated Calcium Silicate Hydrate in Cement Paste: Calcium Silicate Hydrate Jennite10.1177/1056789515580184 ↗
38. The American Mineralogist Crystal Structure Database
39. The Crystal Structure of Jennite, Ca9Si6O18(OH)6·8H2O10.1016/j.cemconres.2003.12.033 ↗
40. Crystal Structure of the Tricalcium Silicate 3CaO.SiO2=C3S
41. Crystal Structure and Hydration of Belite
42. Materials Studio Modeling Environment, Release 6.0
43. The COMPASS Force Field: Parameterization and Validation for Phosphazenes10.1016/S1089-3156(98)00042-7 ↗
44. Polysiloxanes: Ab Initio Force Field and Structural, Conformational and Thermophysical Properties10.1016/S1386-1425(97)00013-9 ↗
45. Semi-Ionic Model for Metal Oxides and Their Interfaces With Organic Molecules10.1021/jp071775y ↗
46. Quantifying Artifacts in Ewald Simulations of Inhomogeneous Systems With a Net Charge10.1021/ct400626b ↗
47. Iterative Minimization Techniques for Ab Initio Total-Energy Calculations: Molecular Dynamics and Conjugate Gradients10.1103/RevModPhys.64.1045 ↗
48. Crystal Structure and Pair Potentials: A Molecular-Dynamics Study10.1103/PhysRevLett.45.1196 ↗
49. Calculation of Elastic-Constants Using Isothermal Molecular-Dynamics10.1103/PhysRevB.33.895 ↗
50. Atomistic Modeling of Mechanical Properties of Polymeric Glasses10.1021/ma00155a022 ↗
51. 2015
52. Determination of Hashin-Shtrikman Bounds on the Isotropic Effective Elastic Moduli of Polycrystals of Any Symmetry10.1016/j.cageo.2015.03.009 ↗
53. The Elastic Behaviour of a Crystalline Aggregate10.1088/0370-1298/65/5/307 ↗
54. Metal Matrix Composites
55. Boumiz, A., Sorrentino, D., Vernet, C., and Tenoudji, F. C., 1997, “Modelling the Development of the Elastic Moduli as a Function of the Hydration Degree of Cement Pastes and Mortars,” Second International RILEM Symposium on Hydration and Setting, pp. 295–316.
56. First-Principles Study of Elastic Constants and Interlayer Interactions of Complex Hydrated Oxides: Case Study of Tobermorite and Jennite10.1111/j.1551-2916.2009.03199.x ↗
57. Role of Interatomic Bonding in the Mechanical Anisotropy and Interlayer Cohesion of CSH Crystals10.1016/j.cemconres.2013.05.009 ↗