A Study of Improving the Formability of the Commercial Pure Titanium Foils
Source abstract
Abstract
Abstract In order to obtain the optimum forming process for commercial pure titanium grade 2 foils, a series of tensile tests and micro scale limited dome height (µ-LDH) tests at four temperatures, and meso scale limited dome height tests (meso-LDH) with three punch speeds were conducted on the as-received foils with a thickness of 75 µm. The effects of temperature, geometry, and high-velocity impact were investigated to understand their influences on the formability of the foils. It has been found in the tensile tests that the formability can be improved by elevating temperatures; this has been validated by the µ-LDH tests. Based on forming limit diagrams (FLDs) of the meso-LDH specimens, the high-velocity impact forming process results in not only much better formability but also more uniform thickness distributions than the quasi-static. By analyzing the fractographical scanning electron microscope (SEM) pictures of the meso-LDH specimens, it has been proven that the formability of the foils by using high-velocity impact process is superior to the conventional process. Furthermore, high-velocity impact causes forming limit curve (FLC) to shift in the upper right direction on the right-hand side of FLD. Therefore, it is suggested forming the foils by using high-velocity impact forming process at the elevated temperature for obtaining a better formability and more uniform thickness distribution. It is also recommended to make the radius of the LDH hemisphere punch close to the smallest feature of the designed products for obtaining more accurate FLCs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Northern Illinois University, DeKalb, IL 60115
Fuel Cell Propulsion System, Application Engineering and R&D, Global Electric Vehicle & Autonomous, General Motors Pontiac Engineering Center, Building C, 850 North Glenwood Avenue, Pontiac, MI 48340-2920
References (18)
Show source-provided references
1. Stamping Formability of Pure Titanium Sheets10.1016/j.jmatprotec.2005.05.004 ↗
2. Zheng · 201510.1051/mfreview/2015005 ↗
3. Marciniak · 2002
4. Inertia Effects on the Ductile Failure of Thin Rings10.1115/1.3162066 ↗
5. Effect of Inertia on the Necking Behaviour of Ring Specimens Under Rapid Radial Expansion
6. Balanethiram, V. S. , 1996, “Hyperplasticity: Enhanced Formability of Sheet Metals at High Velocity,” Ph.D. dissertation, The Ohio State University, Columbus, OH.
7. Formability of Steel Sheet in High Velocity Impact10.1016/j.jmatprotec.2004.08.032 ↗
8. A Constitutive Description of the Deformation of Copper Based on the Use of Mechanical Threshold Stress as an Internal State Variable10.1016/0001-6160(88)90030-2 ↗
9. Dislocation Kinetics at High Strain Rate10.1016/0001-6160(87)90285-9 ↗
10. Formability of Stainless Steel10.1007/s11661-998-0041-1 ↗
11. ASTM E112 · 2004 · 10
12. Utilizing a Meso Scale Limited Dome Test to Study the Effect of Strain Rate on the Formability of Commercial Pure Titanium Grade Two Foil
13. Deformation Behavior of Commercially Pure (CP) Titanium Under Equi-Biaxial Tension10.1016/j.msea.2016.08.018 ↗
14. ASTM E2218-02 · 2008
15. The Coupling Influence of Size Effects and Strain Rates on the Formability of Austenitic Stainless Steel 304 Foil10.1016/j.jmatprotec.2012.10.004 ↗
16. Determination of Forming Speed at a Laser Shock Stretch Drawing Process
17. Determination of Temperature Rise During High Strain Rate Deformation10.1016/S0167-6636(97)00036-7 ↗
18. State of the Art in Micro Forming and Investigations in Micro Deep Drawing