Introduction to Plastics Engineering
Source abstract
Abstract
Industrial and consumer products made of plastics are ubiquitous in our daily lives. Converting raw plastics into useful parts is a scientific and technological challenge that has been progressively overcome in the past several decades. This expansive monograph authored by one of the leading experts with vast experience as an academic at IIT-Kanpur and a practitioner while at GE Corporate R&D tackles this huge subject by expounding aspects of transforming modern plastics into useful day-to-day items based on principles of mechanical engineering and engineering mechanics. It weaves together complex issues related to the mechanics, mechanical design, fabrication, and assembly of engineered plastics. In doing so, the book distinguishes itself from others by emphasizing not just the material science and “build-and-test” approach embraced by the plastics industry but by adopting approaches from engineering science and materials science synergistically to address practical issues of part design, size, cost, development cycle, and assembly, among others.The author demonstrates this distinct approach of integrating materials and engineering aspects of plastics by dividing the monograph into five distinct parts. In Part I, an overview of plastics engineering is offered by describing what plastics are, why they have become important in the last half-a-century or so, how engineering materials have and can influence the product design, the role of engineering science on processing, design, and assembly of parts, and how innovative designs can overcome the complexity and economics associated with plastic products. To drive these ideas home, for example, the author elegantly demonstrates the historical evolution of structural designs and constructions based on stone, iron, and steel over the eons. Part II of the book lays out the fundamentals of continuum mechanics to plastics engineers. It includes concepts of stress, strain, and constitutive relations along with analyses used for axial, flexural, and torsional members. In this part, separate chapters dealing with the fluid mechanics and viscous behaviors of plastics address many important foundational components. Infilling of plastics with other functional phases is a common strategy used to enhance the mechanical performance such as stiffness, strength, coefficient of thermal expansion, and susceptibility to ultraviolet radiation. This category of plastics being a major segment of the modern plastics industry, micromechanics of filled plastics is described in a separate chapter in this part of the book. Part III deals with the classification and chemical structure of plastics in general. The associated concepts are introduced to the beginners in sufficient detail by considering simple polymer systems such as polyethylene and polypropylene. Modification of polymers using various additives and blending of different plastics to achieve desired mechanical behavior is also described in this part of the book. A history of developments of various plastics over the 20th century adds a nice perspective to the rapid evolution of the modern plastics industry. Building on the foundational aspects of viscoelasticity in Part II, a dedicated chapter on evaluating viscoelastic properties of plastics using techniques such as DMA and responses of several candidate materials is included next in this part. The description of the time–temperature superposition principle in sufficient detail is quite valuable to the reader as well. The chapter on the mechanical behavior of different plastics, to which the author has personally contributed a great deal during his long career, provides a phenomenological perspective and links between materials and mechanics aspects of plastics. This fairly elaborate chapter includes a great deal of useful data that elucidates distinguishing aspects of mechanical failure behavior of plastics in terms of necking and thermomechanical response which are often mistakenly assumed to be similar to that of metals.The flexibility of plastics to be designed and made into intricate parts with different sizes, shapes, colors, and finishes via low-cost manufacturing processes make them highly competitive relative to metals. Accordingly, the book emphasizes in the next part, Part IV, shaping of different types of unfilled and filled plastics—thermoplastics, thermosets, and elastomers—into complex parts. A chapter that describes large-scale manufacturing of resins and its conversion into products is described via flowcharts in this part of the book. Subtle issues such as the wall thickness of the part that can be achieved from the perspective of thermal conductivity, thermal diffusivity, and viscous flow characteristics of plastics are also discussed. A rather expansive chapter on processing thermoplastics using injection molding and its variants follows. It deals with all the process-related intricacies in terms of the design of the molding machines, fabrication of molds and simulation tools used for designing flow paths, prediction of residual stresses, and shrinkage and warpage of molded parts. This chapter also illustrates the complexity of heat transfer and flow paths around obstructions such as pins, inserts, dimensionally disparate parts, among others. The author underscores the importance of computer-aided process control and computer simulations alongside measurements to tackle the complexities intrinsic to the molding process. The next chapter in this part is dedicated to shrinkage, dimensional stability, and residual stresses in plastic parts from shaping processes such as injection molding. The author recognizes that although these factors are easy to conceive, tackling them practically is far more challenging, often requiring a trial-and-error approach. Again, by tapping into his own research on the subject, the author considers the example of injection molding of a simple thin rectangular part for monitoring the pressure histories in the mold as well as shrinkage at various spatial locations as a function of different hold pressures. The importance of pressure–temperature-specific volume data, introduced in Part II of the book, is revisited again in the context of part shrinkage. The presentation on the evolution of residual stresses and warpage is also highly informative for practicing engineers. The processing methods other than injection molding—extrusion, injection molding, blow molding, thermoforming, and three-dimensional (3D) printing—are all described in sufficient detail and with good illustrations in a follow-on chapter. Processing of parts using thermoset resins and elastomers is addressed in a separate chapter. It includes details on processing advanced composites and rubber parts including reinforced rubber such as automotive tires. Pultrusion, filament winding, and laminated composites are among the other topics described regarding the former. The last chapter of Part IV of the book presents various joining methods—both temporary and permanent joints—used for plastics as they meet engineering design requirements and are frequently used alongside other engineering materials including metals. The description includes sections ranging from traditional mechanical fastening and unique adaptations to adhesive bonding, thermal bonding, friction welding, and electromagnetic bonding. In each of these categories, nicely illustrated sub-sections on different variants of each method, the resulting joint morphology, attainable strength, process complexities are all described in sufficient detail along with a good bit of tabulated data.The last part of this book, Part V, is dedicated to filled plastics, a major segment of the modern plastics industry, that offer enhanced mechanical and other functional attributes. It starts with a chapter on state-of-the-art material processing concepts as well as elastic and failure characteristics of discrete fiber-filled plastics comprising of short and long fibers separately. A good bit of this chapter draws from author’s own empirical and phenomenological research on the subject. It is sufficiently detailed and informative with a great deal of useful data on injection-molded glass fiber reinforced PS, PE, PBT, and others. Many not so well-known aspects of filled plastics, namely, inhomogeneities due to the spatial variation of fiber orientation caused by flow patterns, process parameters, fiber aspect ratio, and thickness of the part, to name a few, are all discussed. The chapter includes a detailed section that outlines the complexity of modeling discrete fiber-filled composites by considering fiber orientation tensors in both 3D and 2D. The second chapter of this part deals with lightweight rigid structural foams made of gas-charged and injection-molded thermoplastics originally developed to avoid sink marks in the molded parts. The resulting cross-sectional complexities associated with the nonhomogeneous distribution of millimeter size pores of different sizes are elaborated in this chapter. Understanding the mechanical characteristics—elastic modulus, ultimate stress, and failure strain—being rather challenging for such morphologies, the author again adopts and demonstrates mechanics-based approaches to estimate effective elastic moduli in the axial loading and bending configurations. Many of the results reported in this chapter are again derived from author’s own research on the topic. It contains a lot of empirical data on different elastic moduli, ultimate stress and strain as a function of the density of modified PPO, and gas-filled PC structural foams useful to practicing engineers. The next chapter deals with processing and mechanical properties of random mat composites made of non-woven glass fiber mats as reinforcement in thermoplastics ideal for making large, low-cost, stiff, and tough parts. As in the previous two chapters, the focus of this chapter is on quantifying the elastic modulus and tensile strength of these highly nonhomogeneous plastics. The empirical data connecting the tensile modulus with the local material density and then tensile strength with modulus for glass mat-polypropylene composite are valuable to practicing engineers. A great deal of insight into determining the effective elastic modulus of these complex materials, which often vary substantially over short distances by as much as a factor of two over half an inch, is described using mechanics-based models coupled with idealized sinusoidal or rectangular spatial variations. The larger questions of understanding properties—modulus and strength—of such complex materials and structural parts in general using statistical approaches are also considered in this chapter. The last chapter of this part, and the book, is on continuous fiber composites made of thermosets, originally developed as high-performance lightweight materials for the aerospace industry. The coverage in this chapter is essentially qualitative and seems to have been included more for completeness than technical depth. Descriptive sections on filament wound, pultruded, sandwich, and resin transfer molded composites are also part of this chapter. Tires, reinforced hoses, and conveyer belts which are rubber-based composites are described in this chapter as well.In conclusion, this expansive 1000-page book authored by Professor Stokes is certainly a great addition to the bookshelves of both practicing plastics engineers and academics. Apart from a few instances of repetitiveness and a few typographical errors (e.g., GPa instead of MPa for ultimate stress), each chapter of the book has been put together meticulously and thoughtfully with informative illustrations, mechanics-based models, and empirical data. With many chapters of the book containing author’s own works besides others, the monograph is very authentic and I strongly recommend it as a textbook and research monograph.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanotechnology research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Auburn University, AL 36830.
References
Reference metadata was not supplied for this record.