journal article·2014-10-01

Efficient Methodologies for Determining Temperature-Dependent Parameters of a Ni-Base Superalloy Crystal Viscoplasticity Model for Cyclic Loadings

M. M. Kirka, D. J. Smith, R. W. Neu

Publisher page

Abstract

The prediction of temperature-dependent fatigue deformation and damage in directionally solidified and single-crystal nickel-base superalloy components used in the hot section of gas turbine engines requires a constitutive model that accounts for the crystal orientation in addition to the changing deformation mechanisms and rate dependencies from room temperature to extremes of the use temperature (e.g., 1050 °C). Crystal viscoplasticity (CVP) models are ideal for accounting for all of these dependencies. However, as the models become more physically realistic in capturing the true cyclic deformation mechanisms, increases the requirements to achieve an accurate model calibration. As a result, CVP models have yet to become viable for life analysis in industry. To make CVP models an industry relevant tool, the calibration times must be reduced. This paper explores methods to reduce the calibration time. First, a series of special calibration experiments are conceived and conducted on each relevant orientation and microstructure. Second, a set of parameterization protocols are used to minimize parameter interdependencies that reduce the amount of iteration required during the calibration. These experimental and calibration protocols are exercised using the CVP model of Shenoy et al. (2005, “Thermomechanical Fatigue Behavior of a Directionally Solidified Ni-Base Superalloy,” ASME J. Eng. Mater. Technol., 127(3), pp. 325–336) by calibrating a directionally solidified Ni-base superalloy across an industry relevant temperature range of 20 °C to 1050 °C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332

The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332;

Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 e-mail:

References (38)

Show source-provided references
1. Application of Materials and Process Modeling to the Design, Development and Sustainment of Advanced Turbine Engines
2. Challenges for High Temperature Materials in the New Millennium
3. National Science and Technology Council · 2011
4. Verification and Validation of ICME Methods and Models for Aerospace Applications
5. 2006
6. Hierarchical Multiscale Modeling of Ni-Base Superalloys
7. Rapid Determination of Temperature-Dependent Parameters for the Crystal Viscoplasticity Model
8. Thermomechanical Fatigue Behavior of a Directionally Solidified Ni-Base Superalloy10.1115/1.1924560 ↗
9. Microstructure-Sensitive Modeling of Polycrystalline IN 10010.1016/j.ijplas.2008.01.001 ↗
10. Grain Scale Crystal Plasticity Model With Slip and Microtwinning for a Third Generation Ni-Base Disk Alloy10.1002/9781118516430.ch18 ↗
11. A Dislocation Mechanics-Based Crystallographic Model of a B2-Type Intermetallic Alloy10.1016/S0749-6419(95)00041-0 ↗
12. Microstructure-Based Multiscale Constitutive Modeling of γ-γ’ Nickel-Base Superalloys10.1615/IntJMultCompEng.v4.i5-6.70 ↗
13. Constitutive Equations for Cyclic Plasticity and Cyclic Viscoplasticity10.1016/0749-6419(89)90015-6 ↗
14. Continuous Distributions of Dislocations: A New Application of the Methods of Non-Riemannian Geometry10.1098/rspa.1955.0171 ↗
15. Anisotropic Constitutive Modeling for Nickel-Base Single Crystal Superalloys
16. A Computational Model for the Finite Element Analysis of Thermoplasticity Coupled With Ductile Damage at Finite Strains10.1002/(SICI)1097-0207(19990820)45:11<1569::AID-NME644>3.0.CO;2-P ↗
17. Life Management System for Advanced E Class Gas Turbines: General Electric 7EA 1st Stage Bucket Analysis
18. ‘Cube Slip’ in Near-[111] Oriented Specimens of a Single-Crystal Nickel-Base Superalloy10.1016/S1359-6462(98)00446-1 ↗
19. Mechanistic Considerations for TMF Life Prediction of Nickel-Base Superalloys10.1016/0029-5493(92)90164-Q ↗
20. Non-Schmid Yield Behavior in Single Crystals10.1016/0022-5096(92)90005-M ↗
21. A Theory of the Anomalous Yield Behavior in L12 Ordered Alloys10.1016/0001-6160(84)90117-2 ↗
22. Anisotropic Constitute Modeling of a Single Crystal Superalloy at Elevated Temperature10.1115/1.3120838 ↗
23. Creep Fatigue of a Directionally Solidified Ni-Base Superalloy—Smooth and Cylindrically Notched Specimens10.1111/j.1460-2695.2010.01487.x ↗
24. Standard Test Method for Strain-Controlled Fatigue Testing
25. Multiscale Representation of Polycrystalline Ineleasticity
26. ABAQUS Inc.
27. 1957
28. Comparison Between Experimental Determination and Calculation of Elastic Properties of Nickel-Base Superalloys Between 25 and 1200 °C10.1002/pssa.2211100217 ↗
29. Elastic Properties of Textured and Directionally Solidified Nickel-Based Superalloys Between 25 and 1200 °C10.1016/0921-5093(89)90350-X ↗
30. Thermomechanical Fatigue Formation in Nickel-Base Superalloys at Notches
31. Thermomechanical Fatigue Crack Formation in Single Crystal Ni-Base Superalloys
32. Thermomechanical Fatigue Behavior of the Directionally-Solidified Nickel-Base Superalloy CM247
33. The Relation Between Polycrystal Deformation and Single-Crystal Deformation10.1007/BF02900224 ↗
34. Plastic Strain in Metals
35. Overview No. 42: Texture Development and Strain Hardening in Rate Dependent Polycrystals10.1016/0001-6160(85)90188-9 ↗
36. 2000
37. Application of Stress Relaxation Testing in Metallurgical Life Assessment Evaluations of GTD111 Alloy Turbine Buckets10.1115/1.2816299 ↗
38. 1995