journal article·2012-10-01

Effect of KIII on Fatigue Crack Growth Behavior

Masanori Kikuchi, Yoshitaka Wada, Chikako Ohdama

Publisher page

Abstract

In this study, mixed-mode fatigue tests are conducted using surface-cracked specimens. Slant surface-cracked specimens are prepared with crack angles of 15 deg, 30 deg, 45 deg, and 60 deg. It is shown that a “factory roof” fracture is formed at the deepest point of the surface crack due to ΔKIII and causes the crack growth rate to decrease. Additionally, fatigue crack growth is simulated using the superposition finite element method (FEM) with crack growth criteria. It is shown that conventional crack growth criteria are not applicable to factory roof fractures. Finally, a modified criterion for the prediction of crack growth rate is proposed, fatigue crack growth simulation is conducted using this criterion, and the results are compared with experimental results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Mechanical Behavior of Composites · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Tokyo University of Science, 2641 Yamazaki, Noda, Chiba 278-8510, Japan e-mail:

Tokyo University of Science, Suwa, 5000-1 Toyohira, Chino, Nagano 391-0292, Japan e-mail:

References (13)

Show source-provided references
1. Schollmann, M., Kullmer, G., Fulland, M., and Richard, H. A., 1963, “A New Criterion for 3D Crack Growth Under Mixed-Mode (I + II + III) Loading,” Proceedings of 6th International Conference on Biaxial/Multiaxial Fatigue & Fracture, Vol. I, pp. 589–596.
2. A Critical Analysis of Crack Propagation Laws10.1115/1.3656900 ↗
3. Brittle and Ductile Crack Propagation Using Automatic Finite Element Crack Box Technique10.1016/j.engfracmech.2006.08.029 ↗
4. Quasi-Automatic of Crack Propagation for 2D Lefm Problems10.1016/0013-7944(95)00247-2 ↗
5. On the Solution of Three-Dimensional Thermo-Elastic Mixed-Mode Edge Crack Problems by the Dual Boundary Element Method10.1016/S0013-7944(00)00015-1 ↗
6. Comparison of Crack Growth Simulation by DBEM and FEM for SEN-Specimens Undergoing Torsion or Bending Loading10.1016/j.engfracmech.2007.03.039 ↗
7. Theoretical Crack Path Prediction10.1111/j.1460-2695.2004.00855.x ↗
8. Comparison of Experimental and Numerically Simulated Fatigue Crack Propagation10.1299/jmmp.3.952 ↗
9. On Adaptive Multilevel Superposition of Finite Element Meshes10.1016/0168-9274(94)90023-X ↗
10. On Fracture Analysis Using an Element Overlay Technique10.1016/j.engfracmech.2004.05.003 ↗
11. A Finite Element Calculation of Stress Intensity Factors by a Modified Crack Closure Integral10.1016/0013-7944(77)90013-3 ↗
12. An Energy Release Rate Criterion for Mixed Mode Fracture10.1007/BF00038891 ↗
13. Experimental Study of the T-Criterion in Ductile Fractures