journal article·2021-10-01

Experimental and Molecular Dynamics Simulation-Based Investigations on Hydrogen Embrittlement Behavior of Chromium Electroplated 4340 Steel

Ozge Dogan, Mehmet Fazil Kapci, Volkan Esat, Burak Bal

Publisher page

Abstract

Abstract In this study, chromium electroplating process, corresponding hydrogen embrittlement, and the effects of baking on hydrogen diffusion are investigated. Three types of materials in the form of Raw 4340 steel, Chromium electroplated 4340 steel, and Chromium electroplated and baked 4340 steel are used in order to shed light on the aforementioned processes. Mechanical and microstructural analyses are carried out to observe the effects of hydrogen diffusion. Mechanical analyses show that the tensile strength and hardness of the specimens deteriorate after the chrome-electroplating process due to the presence of atomic hydrogen. X-ray diffraction (XRD) analyses are carried out for material characterization. Microstructural analyses reveal that hydrogen enters into the material with chromium electroplating process, and baking after chromium electroplating process is an effective way to prevent hydrogen embrittlement. Additionally, the effects of hydrogen on the tensile response of α-Fe-based microstructure with a similar chemical composition of alloying elements are simulated through molecular dynamics (MD) method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Abdullah Gül University, 38080 Kayseri, Turkey

Mechanical Engineering, Center for Sustainability (CfS), Middle East Technical University—Northern Cyprus Campus, Guzelyurt, Mersin 10, Turkey

References (67)

Show source-provided references
1. Effects of Surface Treatments on the Fatigue Strength of AISI 4340 Aeronautical Steel10.1016/S0142-1123(01)00015-9 ↗
2. A Study of Machining Characteristics of AISI 4340 Alloy Steel by Wire Electrical Discharge Machining Process10.1016/j.matpr.2019.12.037 ↗
3. Microstructural Evaluation of Hydrogen Embrittlement and Successive Recovery in Advanced High Strength Steel10.1016/j.jmatprotec.2018.09.039 ↗
4. Hydrogen Embrittlement of 4340 Steel due to Condensation During Vaporized Hydrogen Peroxide Treatment10.1016/j.msea.2011.01.100 ↗
5. Investigation of Role of Alloy Microstructure in Hydrogen-Assisted Fracture of AISI 4340 Steel Using Circumferentially Notched Cylindrical Specimens10.1016/j.msea.2017.05.056 ↗
6. Internal Hydrogen Embrittlement of pre-Cracked, Cadmium-Plated AISI 4340 High Strength Steel With Sustained Load Tests and Incremental Step-Loading Tests10.1016/j.engfracmech.2019.106773 ↗
7. Hydrogen Embrittlement of an Automotive 1700MPa Martensitic Advanced High-Strength Steel10.1016/j.corsci.2020.108726 ↗
8. Experimental Investigation of Hydrogen Embrittlement During Coating Process and Effect on Mechanical Properties of High Strength Steel Used for Fasteners10.1016/j.matpr.2018.06.217 ↗
9. The Influence of Microstructure on the Hydrogen Embrittlement Susceptibility of Martensitic Advanced High Strength Steels10.1016/j.mtcomm.2018.07.011 ↗
10. On Modeling Fracture of Ferritic Steels due to Hydrogen Embrittlement10.1016/j.jmps.2018.09.012 ↗
11. Hydrogen Embrittlement in Different Materials: A Review10.1016/j.ijhydene.2018.09.201 ↗
12. The Synergistic Effects of Hydrogen Embrittlement and Transient gas Flow Conditions on Integrity Assessment of a Precracked Steel Pipeline10.1016/j.ijhydene.2020.04.262 ↗
13. Hydrogen Embrittlement of the Coarse Grain Heat Affected Zone of a Quenched and Tempered 42CrMo4 Steel10.1016/j.ijhydene.2020.04.097 ↗
14. Enumeration of the Hydrogen-Enhanced Localized Plasticity Mechanism for Hydrogen Embrittlement in Structural Materials10.1016/j.actamat.2018.12.014 ↗
15. Lowering Strain Rate Simultaneously Enhances Carbon- and Hydrogen-Induced Mechanical Degradation in an Fe-33Mn-1.1C Steel10.1007/s11661-018-5080-7 ↗
16. Effects of Residual Stress and Plastic Strain on Hydrogen Embrittlement of a Stretch-Formed TRIP-Aided Martensitic Steel Sheet10.1016/j.corsci.2020.108957 ↗
17. A New Perspective on Hydrogen Diffusion and Hydrogen Embrittlement in low-Alloy High Strength Steel10.1016/j.corsci.2020.108800 ↗
18. Dependence of Hydrogen Embrittlement Mechanisms on Microstructure-Driven Hydrogen Distribution in Medium Mn Steels10.1016/j.actamat.2019.11.029 ↗
19. Influence of Dislocations on Hydrogen Diffusion and Trapping in an Al-Zn-Mg Aluminium Alloy10.1016/j.matdes.2019.107901 ↗
20. The Detrimental Effect of Hydrogen at Dislocations on the Hydrogen Embrittlement Susceptibility of Fe-C-X Alloys: An Experimental Proof of the HELP Mechanism10.1016/j.ijhydene.2017.12.109 ↗
21. Evaluation of Susceptibility to Hydrogen Embrittlement—A Rising Step Load Testing Method10.4236/msa.2016.78035 ↗
22. The Synergistic Action and Interplay of Hydrogen Embrittlement Mechanisms in Steels and Iron: Localized Plasticity and Decohesion10.1016/j.engfracmech.2019.106528 ↗
23. Discrete Dislocation Plasticity HELPs Understand Hydrogen Effects in bcc Materials10.1016/j.jmps.2018.08.020 ↗
24. Mechanisms of Hydrogen-Enhanced Localized Plasticity: An Atomistic Study Using α-Fe as a Model System10.1016/j.actamat.2014.01.008 ↗
25. Strain Rate and Hydrogen Effects on Crack Growth From a Notch in a Fe-High-Mn Steel Containing 1.1 wt% Solute Carbon10.1016/j.ijhydene.2019.10.227 ↗
26. A New Venue Toward Predicting the Role of Hydrogen Embrittlement on Metallic Materials10.1007/s11661-016-3708-z ↗
27. Effect of Strain Rate on Hydrogen Embrittlement Susceptibility of Twinning-Induced Plasticity Steel Pre-Charged with High-Pressure Hydrogen Gas10.1016/j.ijhydene.2016.06.259 ↗
28. Hydrogen Reduction During Steel Casting By Thermally Induced Up-Hill Diffusion
29. Impact of Chemical Inhomogeneities on Local Material Properties and Hydrogen Environment Embrittlement in AISI 304L Steels10.1016/j.ijhydene.2018.01.062 ↗
30. Effect of Cathodic Hydrogen Charging on the Wear Behavior of 5754 Al Alloy10.1016/j.wear.2017.08.013 ↗
31. Cathodic Hydrogen Charging of Zinc10.1016/j.corsci.2013.10.016 ↗
32. In-Situ Observation of Martensitic Transformation in an Interstitial Metastable High-Entropy Alloy During Cathodic Hydrogen Charging10.1016/j.scriptamat.2019.07.042 ↗
33. Effect of Cathodic Hydrogen-Charging Current Density on Mechanical Properties of Prestrained High Strength Steels10.1016/j.msea.2015.06.003 ↗
34. Effect of Hydrogen Embrittlement on the Microstructures of Electroplated Steel Alloy 413010.1016/j.asej.2018.08.004 ↗
35. Hydrogen Embrittlement of a Quenching and Partitioning Steel During Corrosion and Zinc Electroplating10.1016/j.msea.2018.12.022 ↗
36. Hydrogen Embrittlement of High Strength Steel Electroplated with Zinc–Cobalt Alloys10.1016/S0010-938X(03)00180-X ↗
37. Effects of Hydrogen-Charging on the Susceptibility of X100 Pipeline Steel to Hydrogen-Induced Cracking10.1016/j.ijhydene.2009.09.090 ↗
38. Effect of pre-Strain on Microstructure and Hydrogen Embrittlement of K-TIG Welded Austenitic Stainless Steel10.1016/j.corsci.2018.12.018 ↗
39. Investigation of the Hydrogen Embrittlement Susceptibility of T24 Boiler Tubing in the Context of Stress Corrosion Cracking of its Welds10.1016/j.prostr.2018.12.038 ↗
40. Effect of Microstructure Inhomogeneity on Hydrogen Embrittlement Susceptibility of X80 Welding HAZ Under Pressurized Gaseous Hydrogen10.1016/j.ijhydene.2017.08.081 ↗
41. A Review: The Impact of Hydrogen Embrittlement on the Fatigue Strength of High Strength Steel10.1016/j.matpr.2020.02.627 ↗
42. Electrochemical and Mechanical Aspects of Hydrogen Embrittlement Evaluation of Martensitic Steels10.1016/B978-0-12-409547-2.13770-9 ↗
44. Effect of Hydrogen in Advanced High Strength Steel Materials10.1016/j.ijhydene.2019.08.149 ↗
45. Hydrogen Embrittlement of a Hard Chromium Plated Cylinder Assembly10.1016/j.engfailanal.2019.04.052 ↗
46. First Principles Investigations of Hydrogen Interaction with Vacancy-Oxygen Complexes in Vanadium Alloys10.1016/j.ijhydene.2019.08.123 ↗
47. Improved Hydrogen Embrittlement Resistance After Quenching–Tempering Treatment for a Cr-Mo-V High Strength Steel10.1016/j.ijhydene.2019.09.142 ↗
48. Experimental Study of Hydrogen Embrittlement in Maraging Steels10.1016/j.prostr.2017.12.049 ↗
49. Effects of Al-Si Coating and Zn Coating on the Hydrogen Uptake and Embrittlement of Ultra-High Strength Press-Hardened Steel10.1016/j.surfcoat.2019.06.047 ↗
50. Effects of Microstructures on Hydrogen Induced Cracking of Electrochemically Hydrogenated Double Notched Tensile Sample of 4340 Steel10.1016/j.msea.2016.02.047 ↗
51. Dwivedi · 2021
52. Microstructural Evolution of AISI 4340 Steel During Direct Metal Deposition Process10.1016/j.msea.2010.11.036 ↗
53. Short-Range Molecular Dynamics10.1006/jcph.1995.1039 ↗
54. Towards Molecular Dynamics Studies of Hydrogen Effects in Fe-Cr-Ni Stainless Steels
55. Visualization and Analysis of Atomistic Simulation Data With OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
56. 3D Time-Resolved Observations of Corrosion and Corrosion-Fatigue Crack Initiation and Growth in Peak-Aged Al 7075 Using Synchrotron X-ray Tomography10.1016/j.corsci.2018.04.029 ↗
57. Investigating Behavior of Hydrogen in Zirconium by First-Principles: From Dissolution, Diffusion to the Interaction with Vacancy10.1016/j.nimb.2019.07.036 ↗
58. Identification of Ductile to Brittle Transition Temperature by Using Plane Strain Specimen in Tensile Test and Correlation with Instrumented Charpy Impact Test: Experimental and Numerical Study10.1051/meca/2017034 ↗
59. Transgranular Crack Growth in the Pipeline Steels Exposed to Near-Neutral pH Soil Aqueous Solutions: The Role of Hydrogen10.1016/j.actamat.2009.08.047 ↗
60. Microstructural Aspects of Intergranular and Transgranular Crack Propagation in an API X65 Steel Pipeline Related to Fatigue Failure10.1016/j.engfailanal.2018.08.014 ↗
61. Effect of Hydrogen Environment on the Separation of Fe Grain Boundaries10.1016/j.actamat.2016.01.067 ↗
62. Pulse Current Plasma Assisted Electrolytic Cleaning of AISI 4340 Steel10.1016/j.jmatprotec.2009.08.018 ↗
63. Failure Analysis of Bolted Joints: Effect of Friction Coefficients in Torque–Preloading Relationship10.1016/j.engfailanal.2010.09.015 ↗
64. 2011
65. Hydrogen Induced Cracking of Pipeline and Pressure Vessel Steels: A Review10.1016/j.engfracmech.2018.06.018 ↗
66. Strain-Induced ɛ-Martensitic Transformation and Hydrogen Embrittlement of SUS304 Stainless Steel10.1080/09500839.2019.1696480 ↗
67. Quantitative Evaluation of Hydrogen Effects on Evolutions of Deformation-Induced ɛ-Martensite and Damage in a High-Mn Steel10.1007/s11661-020-06021-7 ↗