Source abstract
Abstract
Abstract Fe–Co–2V (Hiperco®2 equivalent) is a soft ferromagnetic material that is commonly used for electrical components that require robust magnetic performance. Despite the excellent magnetic properties of Fe–Co–2V, it often exhibits low strength, ductility, and workability due to an ordered B2 microstructure. The mechanical properties exhibit considerable dependency on grain size and degree of order, which are influenced by processing methods. A thorough understanding of Fe–Co–2V’s fatigue performance is required to predict mechanical reliability under operating loads; however, limited fatigue data currently exist for Fe–Co alloys. This work characterizes the fatigue properties of wrought Fe–Co–2V through strain-controlled fatigue testing and fractography. Young’s modulus, ultimate strength, and yield stress were determined through monotonic tension tests. The fatigue behavior was quantified using fully reversed, strain-controlled fatigue testing for applied strain amplitudes ranging from 0.10% to 1.00%. Subsequently, the Coffin–Manson strain-life curve was fit to the experimental data. Failure mechanisms were investigated through fractography with a scanning electron microscope. Inspection of the failure surfaces revealed that crack initiation occurred at defects located on or near the specimen surface with a localized region of crack propagation prior to the transgranular cleavage fracture. Additionally, two material models were calibrated from the experimental static and cyclic experimental testing. The characterization of the fatigue behavior of wrought Fe–Co–2V presented herein will aid in the fatigue analysis of Fe–Co–2V components and the development of analytical fatigue modeling methodologies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, University of California, Davis, CA 95616
Department of Mechanical Engineering, Clemson University, Clemson, SC 29634
Department of Physical Sciences, Embry-Riddle Aeronautical University, Daytona Beach, FL 32114
Department of Mechanical Engineering, University of New Mexico, Albuquerque, NM 87131
Sandia National Laboratories, Albuquerque, NM 87123
Department of Mechanical Engineering, William Marsh Rice University, Houston, TX 77005
References
Reference metadata was not supplied for this record.