journal article·2015-07-01

The Corrosion Behavior of 9Cr Ferritic–Martensitic Heat-Resistant Steel in Water and Chloride Environment

Z. Zhang, P. M. Singh, Z. F. Hu

Publisher page

Abstract

The corrosion behavior of 9Cr ferritic–martensitic heat-resistant steel was investigated in water and chloride environment at room temperature (RT). The results of linear polarization, electrochemical impedance spectroscopy (EIS), and potentiodynamics (PD) polarization tests on long-term exposure show that 9Cr ferritic–martensitic steel has weaker corrosion resistance and greater pitting corrosion tendency in higher chloride concentrations. Corresponding scanning electron microscopy (SEM) observation displays that higher concentration chloride promotes the pitting initiation. During long-term exposure, pitting susceptibility decreases, the average pit size increases, and the density declines in higher chloride concentrations. Pits in the grains and along the grain boundaries are observed by optical microscope (OM), and it indicates that inclusions in grains and carbide particles at grain boundaries are the sites susceptible to pitting initiation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Tongji University, Shanghai 201804, China

School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245

References (26)

Show source-provided references
1. Corrosion and Corrosion Fatigue Behaviors of 9Cr Steel in a Supercritical Water Condition
2. High Temperature Tensile Testing of Modified 9Cr-1Mo After Irradiation With High Energy Protons10.1016/S0022-3115(03)00023-0 ↗
3. Recent Advances in Creep-Resistant Steels for Power Plant Applications
4. Carbide Reactions and Phase Equilibria in Low Alloy Cr–Mo–V Steels Tempered at 773–993 K—Part I: Experimental Measurements10.1016/S1359-6454(97)00238-3 ↗
5. Creep-Fatigue Damage and Life Prediction in P92 Alloy by Focused Ultrasound Measurements10.3365/met.mat.2008.08.391 ↗
6. Microstructural Evolution of P92 Ferritic/Martensitic Steel Under Ar+ Ion Irradiation at Elevated Temperature10.1016/j.matchar.2012.03.009 ↗
7. Oxidation Behavior of Ferritic-Martensitic Steel P92 Exposed to Supercritical Water at 600 °C/25 MPa
8. Microstructural Observation of Tempered Martensite in Medium-Carbon Low-Alloy Steel by Atomic Force Microscopy10.2320/jinstmet1952.64.6_460 ↗
9. Observations of Prior Austenite Grain Boundaries and Carbides in the Same Area of Tempered Martensite in Medium-Carbon Steel by Atomic Force Microscopy10.2320/jinstmet1952.65.8_734 ↗
10. Corrosion and Passivity of Metals in Methanol Solutions of Electrolytes10.1007/s10008-008-0649-5 ↗
11. The Effect of Water, Sulphate and pH on the Corrosion Behavior of Carbon Steel in Ethanolic Solutions10.1016/0013-4686(87)87086-X ↗
12. Role of Water, Acetic Acid and Chloride on Corrosion and Pitting Behaviour of Carbon Steel in Fuel-Grade Ethanol10.1016/j.corsci.2010.03.034 ↗
13. Inhibition Mechanism of Imidazoline Derivative Inhibitor for Q235 Steel in Saltwater Saturated With CO210.3866/PKU.WHXB20080124 ↗
14. Electrochemical and Surface Analysis Studies on Corrosion Inhibition of Q235 Steel by Imidazoline Derivative Against CO2 Corrosion10.1016/j.corsci.2010.09.042 ↗
15. The Electrochemical Behaviour of 2205 Duplex Stainless Steel in Alkaline Solutions With Different pH in the Presence of Chloride10.1016/j.electacta.2012.01.025 ↗
16. Theory
17. Impedance and XPS Study of Benzotriazole Films Formed on Copper, Copper–Zinc Alloys and Zinc in Chloride Solution
18. Point Defect Model for the Passive State10.1149/1.2069096 ↗
19. The Corrosion Behavior of Austenitic and Duplex Stainless Steels in Artificial Saliva With the Addition of Fluoride10.1016/j.corsci.2010.11.010 ↗
20. Corrosion Behavior of 5A05 Aluminum Alloy in NaCl Solution10.1007/s40195-013-0018-y ↗
21. Mechanism of (Mg,Al,Ca)-Oxide Inclusion-Induced Pitting Corrosion in 316L Stainless Steel Exposed to Sulphur Environments Containing Chloride Ion10.1016/j.corsci.2012.09.044 ↗
22. Research of Pitting Susceptibility in Low Carbon Steels and Mechanism of Pitting Initiation
23. Pit Initiation Mechanism at MnS Inclusions in Stainless Steel: Synergistic Effect of Elemental Sulfur and Chloride Ions10.1149/2.081310jes ↗
24. Influence of Microstructural Inhomogeneities on the Fracture Toughness of Modified 9Cr-1Mo Steel at 298-823 K
25. 2005 · 84
26. Sikka, V. K., Ward, C. T., and Thomas, K. C., 1983, “Modified 9Cr-1Mo Steel—An Improved Steel for Steam Generator Application,” Ferritic Steels for High Temperature Applications: Proceedings of ASM International Conference on Production, Fabrication, Properties and Application of Ferritic Steels for High Temperature Applications, Warren, PA, 6–8 October 1981, A. K.Khare, ed., ASM, Metals Park, OH, pp. 65–84.