Predictions of the Elastic–Plastic Compressive Response of Functionally Graded Polymeric Composite Lattices Manufactured by Three-Dimensional Printing
Source abstract
Abstract
Abstract We use three-dimensional printing to manufacture lattices with uniform and graded relative density, made from a composite parent material comprising a nylon matrix reinforced by short carbon fibers. The elastic–plastic compressive response of these solids is measured up to their densification regime. Data from experiments on the lattices with uniform relative density are used to deduce the dependence of their elastic–plastic homogenized constitutive response on their relative density, in the range 0.2–0.8. These data are used to calibrate finite element (FE) simulations of the compressive response of functionally graded lattices (FGLs), which are found in good agreement with the corresponding measurements, capturing the salient features of the measured stress versus strain responses. This exercise is repeated for two lattice topologies (body-centered cubic and Schwarz-P). The phenomenological constitutive models produced in this study can be used in topology optimization to maximize the performance of 3D-printed FGLs components in terms of stiffness, strength, or energy absorption.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Topology Optimization in Engineering · Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Imperial College London Department of Aeronautics, , London SW7 2AZ , UK
Funding
Engineering and Physical Sciences Research Council
References (34)
Show source-provided references
1. Strategies for Functionally Graded Lattice Structures Derived Using Topology Optimisation for Additive Manufacturing10.1016/j.addma.2017.11.008 ↗
2. Effective Design and Simulation of Surface-Based Lattice Structures Featuring Volume Fraction and Cell Type Grading10.1016/j.matdes.2018.05.058 ↗
3. Multi-Morphology Transition Hybridization CAD Design of Minimal Surface Porous Structures for Use in Tissue Engineering10.1016/j.cad.2014.06.006 ↗
4. An Investigation Into Reinforced and Functionally Graded Lattice Structures10.1177/0021955X16639035 ↗
5. Effect of Density and Unit Cell Size Grading on the Stiffness and Energy Absorption of Short Fibre-Reinforced Functionally Graded Lattice Structures10.1016/j.addma.2020.101171 ↗
6. Mechanical Performance of Additively Manufactured Fiber-Reinforced Functionally Graded Lattices10.1007/s11837-019-03961-3 ↗
7. Review on Design and Structural Optimisation in Additive Manufacturing: Towards Next-Generation Lightweight Structures10.1016/j.matdes.2019.108164 ↗
8. Mechanical Response of a Triply Periodic Minimal Surface Cellular Structures Manufactured by Selective Laser Melting10.1016/j.ijmecsci.2018.08.039 ↗
9. Investigation of Functionally Graded TPMS Structures Fabricated by Additive Manufacturing10.1016/j.matdes.2019.108021 ↗
10. Mechanical Properties of 3D Printed Polymeric Cellular Materials With Triply Periodic Minimal Surface Architectures10.1016/j.matdes.2017.03.018 ↗
11. Sheet and Network Based Functionally Graded Lattice Structures Manufactured by Selective Laser Melting : Design, Mechanical Properties, and Simulation10.1016/j.ijmecsci.2020.105480 ↗
12. Approximation of the Mechanical Response of Large Lattice Domains Using Homogenization and Design of Experiments10.3390/app10113858 ↗
13. Bioinspired Functionally Graded Gyroid Sandwich Panel Subjected to Impulsive Loadings10.1016/j.compositesb.2020.107773 ↗
14. Material Model Calibration (PolyUMod)
15. A Discretization Method for Predicting the Equivalent Elastic Parameters of the Graded Lattice Structure10.1177/1687814020984375 ↗
16. Homogenization of Multicomponent Composite Orthotropic Materials Using FEA10.1002/(sici)1099-0887(199707)13:7<517::aid-cnm74>3.0.co;2-l ↗
17. Functionally Graded Lattice Structure Topology Optimization for the Design of Additive Manufactured Components With Stress Constraints10.1016/j.cma.2018.10.010 ↗
18. Effective Anisotropic Elastic and Plastic Yield Properties of Periodic Foams Derived From Triply Periodic Schoen’s I-WP Minimal Surface10.1061/(ASCE)EM.1943-7889.0001759 ↗
19. Isotropic Constitutive Models for Metallic Foams10.1016/S0022-5096(99)00082-4 ↗
20. A Constitutive Model for Transversely Isotropic Foams, and Its Application to the Indentation of Balsa Wood10.1016/j.ijmecsci.2004.11.010 ↗
21. Efficient Design-Optimization of Variable-Density Hexagonal Cellular Structure by Additive Manufacturing: Theory and Validation10.1115/1.4028724 ↗
22. An Efficient and Scalable Approach for Generating Topologically Optimized Cellular Structures for Additive Manufacturing10.1016/j.addma.2016.06.013 ↗
23. Design Optimization of Irregular Cellular Structure for Additive Manufacturing10.1007/s10033-017-0168-3 ↗
24. A Voxel-Based Method of Constructing and Skinning Conformal and Functionally Graded Lattice Structures Suitable for Additive Manufacturing10.1016/j.addma.2016.10.006 ↗
25. Composite 3D Printing
26. 3D-Printed Short Carbon Fibre Reinforced Perforated Structures With Negative Poisson’s Ratios: Mechanisms and Design10.1016/j.compstruct.2020.111859 ↗
27. Sauer · 2018
28. Tensile Properties and Failure Behavior of Chopped and Continuous Carbon Fiber Composites Produced by Additive Manufacturing10.1016/j.addma.2018.12.020 ↗
29. Comparison of Strength of 3D Printing Objects Using Short Fiber and Continuous Long Fiber10.1088/1757-899X/778/1/012030 ↗
30. 3D-Printing of Meso-Structurally Ordered Carbon Fiber/Polymer Composites With Unprecedented Orthotropic Physical Properties10.1038/srep43401 ↗
31. Highly Oriented Carbon Fiber-Polymer Composites via Additive Manufacturing10.1016/j.compscitech.2014.10.009 ↗
32. Dassault Systèmes. Abaqus CAE. (Version 2018) [Software] Dassault Systèmes
33. Crushable Foam Plasticity Models
34. Gibson · 199710.1017/CBO9781139878326 ↗