journal article·2024-10-01

Creep Performance Study of Inconel 740H Weldment Based on Microstructural Deformation Mechanisms

Xijia Wu, Rong Liu, Xiaozhou Zhang, Xueyao Wu, Fadila Khelfaoui

Publisher page

Abstract

Abstract The creep behavior of Inconel 740H weldment at the temperature of 760 °C is investigated experimentally and analytically using the deformation-mechanism-based true stress (DMTS) model. The Inconel 740H weldment specimens are prepared with the gas tungsten arc welding technique. Creep testing is performed on the Inconel 740H weldment specimens under a range of stress levels from 190 MPa to 447 MPa at the temperature of 760 °C. The DMTS model is employed to analyze the creep curves and creep rates. The model parameters for Inconel 740H weldment are determined from the analyses of the creep testing data in combination with that from the previous studies of similar materials based on the same creep mechanisms that involve grain boundary sliding and intragranular dislocation climb-plus-glide with dislocation multiplication. The creep life predictions of the DMTS model for Inconel 740H weldment agree very well with creep rupture test data within a temperature range of 700–800 °C. The fractured surfaces and longitudinal sections of creep-tested Inconel 740H weldment specimens are examined using scanning electron microscopy, which corroborates the DMTS model inference that the creep failure of Inconel 740H weldment is in a mode of predominantly intergranular fracture. The present study suggests that grain boundary sliding is the most significant controlling factor for the creep failure of Inconel 740H weldment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Aerospace Research Center, National Research Council Canada Structures and Materials Performance Laboratory, , Ottawa, ON K1A 0R6 , Canada

Carleton University Department of Mechanical and Aerospace Engineering, , 1125 Colonel By Drive, Ottawa, ON K1S 5B6 , Canada

Velan Inc. , 300 McArthur Avenue, Montreal, QC H4T 0A2 , Canada

References (29)

Show source-provided references
1. Wrought Ni-Base Superalloys for Steam Turbine Applications Beyond 700 °C10.1002/adem.200310083 ↗
2. Tensile and Creep Deformation of a Newly Developed Ni-Fe-Based Superalloy for 700 °C Advanced Ultra-Supercritical Boiler Applications10.1007/s12540-015-4627-z ↗
3. Evaluation of Weld Joint Strength Reduction Factor Due to Creep in Alloy 740H to P92 Dissimilar Metal Weld Joint10.1007/s12540-021-00988-7 ↗
4. Effects of Heat Treatment on the Microstructure Evolution and the High-Temperature Tensile Properties of Haynes 282 Superalloy10.1016/j.msea.2019.02.054 ↗
5. Heat Treatment Design of Inconel 740H Superalloy for Microstructure Stability and Enhanced Creep Properties10.1016/j.jallcom.2023.169341 ↗
6. Long-Term Creep-Rupture Behavior of Alloy Inconel 740/740H10.1007/s11661-021-06253-1 ↗
7. Case 2702 Seamless Ni-25Cr- 20Co Material Section 1, Cases of the ASME Boiler and Pressure Vessel Code
8. Debarbadillo · 2017 · 46910.1016/B978-0-08-100552-1.00014-2 ↗
9. Research and Improvement on Structure Stability and Corrosion Resistance of Nickel-Base Superalloy INCONEL Alloy 74010.1016/j.matdes.2005.03.015 ↗
10. The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 at 1023 K (750 °C)10.1007/s11661-011-1013-4 ↗
11. Microstructural Evolution of INCONEL Alloy 740H Fusion Welds During Creep10.1007/s11661-014-2682-6 ↗
12. Microstructure and Mechanical Properties of Inconel 740H After Long-Term Service10.3390/ma11112130 ↗
13. Influences of Composition and Grain Size on Creep-Rupture Behavior of Inconel Alloy 74010.1016/j.msea.2013.04.087 ↗
14. Microstructural Changes in Inconel 740 After Long-Term Aging in the Presence and Absence of Stress
15. Tortorelli · 2014 · 29
16. Special Metals Corporation · 2023
17. A True-Stress Creep Model Based on Deformation Mechanisms for Polycrystalline Materials10.1007/s11665-012-0191-6 ↗
18. Creep Performance Characterization for Haynes 282 Using the Deformation-Mechanism-Based True Stress Model10.1016/j.tsep.2022.101603 ↗
19. Tertiary Creep in Nickel-Base Superalloys: Analysis of Experimental Data and Theoretical Synthesis10.1016/0001-6160(87)90083-6 ↗
20. Grain Boundary Sliding in the Presence of Grain Boundary Precipitates During Transient Creep10.1007/BF02649087 ↗
21. Wu · 2019 · 9110.1201/b22348-5 ↗
22. An Integrated Creep-Fatigue Theory for Material Damage Modeling10.4028/www.scientific.net/KEM.627.341 ↗
23. Deformation-Mechanism-Based Modeling of Creep Behavior of Modified 9Cr-lMo Steel10.1016/j.msea.2017.02.044 ↗
24. Creep Performance Modeling of Modified 9Cr–1Mo Steels With Oxidation10.1007/s11661-019-05588-0 ↗
25. Deformation-Mechanism-Based Creep Model and Damage Mechanism of G115 Steel Over a Wide Stress Range10.1016/j.msea.2018.11.083 ↗
26. Deformation Mechanism-Based True-Stress Creep Model for SA508 Gr.3 Steel Over the Temperature Range of 450–750 °C10.1016/j.jnucmat.2019.151776 ↗
27. Creep Behavior and Life Prediction of a Reactor Pressure Vessel Steel Above Phase Transformation Temperature Via a Deformation Mechanism-Based Creep Model10.1111/ffe.14081 ↗
28. Current Status of the US DOE/OCDO A-USC Materials Technology Research and Development Program
29. Hot Workability Integrating Processing and Activation Energy Maps of Inconel 740 Superalloy10.1016/j.mtcomm.2018.01.009 ↗