Experimental and Numerical Modeling of Surface Indentation Response of Plastically Graded Materials
Source abstract
Abstract
Materials with customized spatial gradients in mechanical properties are increasingly used in high performance applications requiring enhanced resistance to contact loads, wear, and fatigue. In many engineering materials, multiple property and microstructural gradients may occur simultaneously with depth. In this manuscript, two case carburized steels are analyzed for their gradient in hardness with depth, emphasizing the resulting variation in surface hardness under increasing indentation loads. A parametric study using finite element analysis is then conducted in order to characterize the influence of individual property gradients on the surface indentation response of graded materials. It is shown that the measured surface hardness value decreases rapidly under increasing surface indentation loads in materials with sharp negative hardness gradients. It is also shown that this trend is independent of the magnitude of the strain hardening exponent of the material, as well as the gradient in strain hardening exponent. Gradients in elastic properties were also shown to have negligible influence on surface hardness trends for a fixed gradient in hardness. Finally, it is revealed that the depth of subsurface plastic deformation increases with sharper gradients in hardness, while being insensitive to changes in strain hardening exponent. For elastically graded materials, a decreasing gradient in elastic modulus limits the depth of plastic deformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Mechanical stress and fatigue analysis · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
United Technologies Research Center, East Hartford, CT 06108
e-mail:
Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611
References (35)
Show source-provided references
1. 1999
2. 1998
3. Mechanics of Indentation of Plastically Graded Materials—I: Analysis10.1016/j.jmps.2007.07.007 ↗
4. Mechanics of Indentation of Plastically Graded Materials—II: Experiments on Nanocrystalline Alloys With Grain Size Gradients10.1016/j.jmps.2007.07.006 ↗
5. Gradients in Elastic Modulus for Improved Contact-Damage Resistance. Part I: The Silicon Nitride-Oxynitride Glass System10.1016/S1359-6454(01)00200-2 ↗
6. Gradients in Elastic Modulus for Improved Contact-Damage Resistance. Part II: The Silicon Nitride-Silicon Carbide System10.1016/S1359-6454(01)00201-4 ↗
7. Finite Element Analysis of the Initial Yielding Behavior of a Hard Coating/Substrate System With Functionally Graded Interface Under Indentation and Friction10.1115/1.555373 ↗
8. Graded Materials for Resistance to Contact Deformation and Damage10.1126/science.1059716 ↗
9. Determination of Constitutive Response of Plastically Graded Materials
10. A New Scheme for Computational Modeling of Conical Indentation in Plastically Graded Materials10.1557/JMR.2004.0239 ↗
11. Analysis of Instrumented Indentation Test Data for Functionally Graded Materials
12. Micro-Indentation and Inverse Analysis to Characterize Elastic-Plastic Graded Materials
13. Determination of Properties of Graded Materials by Inverse Analysis and Instrumented Indentation10.1016/S1359-6454(00)00217-2 ↗
14. Determining Plastic Properties of a Material With Residual Stress by Using Conical Indentation
15. Indentation of Plastically Graded Substrates by Sharp Indentors10.1016/S0020-7683(02)00110-5 ↗
16. New Method to Determine the Mechanical Properties of Heat Treated Steels10.1016/S0020-7403(01)00048-0 ↗
17. 1987
18. 1999
19. Determination of Subsurface Hardness Gradients in Plastically Graded Materials Via Surface Indentation10.1115/1.4003859 ↗
20. Microstructure-Property Relationships in M50-NiL and P675 Case Hardened Bearing Steels
21. A Micro Mechanical Study on Failure Initiation of Dual Phase Steels Under Tension Using Single Crystal Plasticity Model10.1016/j.ijplas.2010.12.001 ↗
22. Correlation Between Tensile and Indentation Behavior of Particle-Reinforced Metal Matrix Composites: An Experimental and Numerical Study10.1016/S1359-6454(01)00226-9 ↗
23. Determination of the Effective Elastic Plastic Response of Metal Ceramic Composites10.1016/j.ijplas.2007.07.001 ↗
24. Load Partitioning Between Ferrite and Cementite During Elasto-Plastic Deformation of an Ultrahigh-Carbon Steel10.1016/j.actamat.2006.11.004 ↗
25. Crystallography and Metallography of Carbides in High Alloy Steels10.1016/j.matchar.2007.07.005 ↗
26. Analysis of Vickers Indentation10.1016/0020-7683(94)90225-9 ↗
27. An Improved Technique for Determining Hardness and Elastic-Modulus Using Load and Displacement Sensing Indentation Experiments
28. A New Method for Estimating Residual Stresses by Instrumented Sharp Indentation10.1016/S1359-6454(98)00226-2 ↗
29. Modelling of Sharp Indentation Experiments: Some Fundamental Issues
30. The Effect of Indenter Angle on the Microindentation Hardness10.1016/j.actamat.2007.07.016 ↗
31. Two New Expanding Cavity Models for Indentation Deformations of Elastic Strain-Hardening Materials
32. Nanoindentation With Spherical Indenters: Finite Element Studies of Deformation in the Elastic Plastic Transition Regime
33. A Reformulation of Strain Gradient Plasticity10.1016/S0022-5096(01)00049-7 ↗
34. A Conventional Theory of Mechanism-Based Strain Gradient Plasticity
35. Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity10.1016/S0022-5096(97)00086-0 ↗