journal article·2024-07-01

High Temperature Oxidation of Additively and Traditionally Manufactured Inconel 718

Matthew R. Gazella, Marc D. Polanka, Ryan A. Kemnitz, Cayla C. Eckley, Brianna M. Sexton, James R. Sebastian, Reece C. Hunt

Publisher page

Abstract

Abstract Additively manufactured nickel-based superalloys are now being considered as a replacement for traditionally manufactured components on commercial and military aircraft. While the potential of additive manufacturing for gas turbine engines is promising, the quality and performance of additive manufactured components still need extensive study. Coupon-sized test specimens comprised of as-printed additively and traditionally manufactured Inconel 718 with and without yttria-stabilized zirconia thermal barrier coating were tested under simulated isothermal and thermal cycling combustion conditions that were representative of gas turbine environments. Pre-test scanning electron microscopy indicated that traditionally manufactured coupons had a smooth surface finish with minor imperfections while additive manufactured coupons had a rough surface finish. Post-test scanning electron microscopy exhibited differences in oxide scale between the isothermal and thermal cycling conditions. The thermal cycling condition increased the amount of oxide scale for both additively manufactured and traditionally manufactured Inconel 718. The size of the oxide islands on traditionally manufactured coupons was significantly larger than the additively manufactured coupons. The results indicated that differences in surface roughness may affect the growth of the oxidation scale in a high-temperature combustion environment. The benefits of yttria-stabilized zirconia thermal barrier coating were characterized. The substrate of the coupons experienced little to no formation of oxide scales compared to the uncoated additive and traditionally manufactured coupons. The results further suggested that yttria-stabilized zirconia thermal barrier coating can be utilized to provide both insulation and oxidation protection when desired. Post-test energy-dispersive X-ray spectrometry results corresponded well with known elemental compositions and oxidation mechanisms.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Air Force Institute of Technology , AFIT/ENY, WPAFB, OH 45433

University of Dayton , 300 College Park Drive, Dayton, OH 45469

University of Dayton Research Institute , 300 College Park Drive, Dayton, OH 45469

References (35)

Show source-provided references
1. Highly Anisotropic Steel Processed by Selective Laser Melting10.1007/s11663-013-9875-z ↗
2. Characterization of H13 Steel Produced Via Electron Beam Melting10.1108/13552540410512516 ↗
3. Residual Stresses in LENS Deposited AISI 410 Stainless Steel Plates10.1016/j.msea.2008.05.044 ↗
4. Open-Cellular Copper Structures Fabricated by Additive Manufacturing Using Electron Beam Melting10.1016/j.msea.2011.03.053 ↗
5. Additive Manufacturing of Nickel-Based Superalloy Inconel 718 by Selective Electron Beam Melting: Processing Window and Microstructure10.1557/jmr.2014.192 ↗
6. Selective Laser Melting Additive Manufactured Inconel 718 Superalloy Parts: High-Temperature Oxidation Property and Its Mechanisms10.1016/j.optlastec.2014.03.008 ↗
7. Characterization of Ti-6Al-4 V Open Cellular Foams Fabricated by Additive Manufacturing Using Electron Beam Melting10.1016/j.msea.2009.11.015 ↗
8. A Study of the Micro Structural Evolution During Selective Laser Melting of Ti-6Al-4 V10.1016/j.actamat.2010.02.004 ↗
9. Control and Optimization of the Selective Laser Melting Process: From the Initial Powder Properties to Their Impact on Final Manufactured Parts Characteristics
10. Shih · 201410.2514/4.102660 ↗
11. The Effects of Long-Time Exposure on Alloy 71810.7449/1994/Superalloys_1994_659_670 ↗
12. High Temperature Oxidation of Inconel 718 Manufactured by Laser Beam Melting and Electron Beam Melting: Effect of Surface Topography10.1016/j.corsci.2018.07.005 ↗
13. The Metallurgy of Alloy 71810.1115/1.3609651 ↗
14. Metallurgy of a Columbium-Hardened Nickel-Chromium-Iron Alloy10.1520/STP43733S ↗
15. Application of Alloy 718 in GE Aircraft Engines: Past, Present and Next Five Years10.7449/2001/Superalloys_2001_1_11 ↗
16. Colombié · 2012
17. Oxidation of Ni-Cr-Al Alloys Between 1000 deg and 1200 °C10.1149/1.2407837 ↗
18. Young · 2008
19. The Versatility of HVOF Burner Rig Testing for Ceramic Matrix Composite Evaluation10.3390/jcs5080223 ↗
20. Mach 0.3 Burner Rig Facility at the NASA Glenn Materials Research Laboratory
21. NASA GRC’s High Pressure Burner Rig Facility and Materials Test Capabilities
22. Development and Use of a New Burner Rig Facility to Mimic Service Loading Conditions of Ni-Based Single Crystal Superalloys10.1051/matecconf/20141420001 ↗
23. Fatigue Characterization of Melt-Infiltrated Woven Hi-Nic-S/BN/SiC CMC Using a Unique Combustion Heating Test Facility
24. Testing and Characterization of Additive and Traditionally Manufactured Inconel 718 in a Combustion Materials Test Facility10.2514/6.2022-1427 ↗
25. ASTM
26. Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Application
27. ET10 Handheld Thermal Emissometer
28. Total Hemispherical Emissivity of Oxidized Inconel 718 in the Temperature Range 300–1000 °C10.1016/S0894-1777(00)00021-2 ↗
29. Total Hemispherical Emissivity of Inconel 71810.1016/j.nucengdes.2015.02.018 ↗
30. Infrared Radiative Properties of Yttria–Stabilized Zirconia Thermal Barrier Coatings
32. Wide-Area 3D Measurement System Head—VR-5200
33. Bose · 2017
35. Goldstein · 2017