journal article·2025-04-01

Optimal Tungsten Inert Gas Welding Parameters of Dissimilar Aluminum Alloys Al 7075 and Al 6061 Using Ultrasonic Vibration and Nanocomposite Filler (Al 5356/ZrB2) to Alleviate Hot Cracking Phenomenon

Gokul Raju Rangasamy, Jayakrishnan Nampoothiri, Dhilip Annamalai, Lakshmanan Algappan

Publisher page

Abstract

Abstract In this study, the welding of dissimilar aluminum alloys, Al 7075 and Al 6061, was investigated using Al 5356 filler rods reinforced with ZrB2 particles. The welding process was conducted using tungsten inert gas (TIG) welding, with and without ultrasonic vibration, to enhance weld quality and reduce hot cracking. Optimization of process parameters for dissimilar TIG welding was performed through Response Surface Methodology (RSM), which generated a design matrix to analyze the influence of process parameters on response variables. Numerical and graphical optimization was applied to minimize hot cracking sensitivity and maximize microhardness. The RSM-based models suggested an optimal welding current of 93 A, the use of Al 5356/ZrB2 nanocomposite filler, and the application of ultrasonic vibrations. Experimental validation of the identified solution demonstrated improvements in weld quality, including increased yield strength and ductility. The combination of nano-reinforced fillers and ultrasonic vibrations was found to enhance weldability and mitigate hot cracking in dissimilar aluminum joints. The mechanism of hot cracking reduction involved grain refinement, degassing, and homogenization due to ultrasonic vibrations, as well as the modification of weld pool chemistry and control of dilution by the nanocomposite filler, which collectively minimized solidification shrinkage and stress. Under these optimized conditions, no hot cracking was observed experimentally.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Akshaya College of Engineering and Technology Department of Mechatronics Engineering, , Coimbatore, Tamil Nadu 642109 , ;

PSG College of Technology Department of Production Engineering, , Coimbatore, Tamil Nadu 641004 ,

Funding

Science and Engineering Research Board

References (47)

Show source-provided references
1. Recent Development in Aluminium Alloys for the Automotive Industry10.1016/S0921-5093(99)00653-X ↗
2. Recent Development in Aluminium Alloys for Aerospace Applications10.1016/S0921-5093(99)00674-7 ↗
3. Aluminum Alloys in Marine Construction: Characteristics, Application, and Problems From a Fabrication Viewpoint10.1007/s40868-019-00069-w ↗
4. Aluminium Matrix Hybrid Composites: A Review of Reinforcement Philosophies; Mechanical, Corrosion and Tribological Characteristics10.1016/j.jmrt.2015.05.003 ↗
5. A Systematic Review on the Mechanical, Tribological, and Corrosion Properties of Al 7075 Metal Matrix Composites Fabricated Through Stir Casting Process10.1155/2023/5442809 ↗
6. A Review on Mechanical Properties and Wear Behaviour of Aluminium Based Metal Matrix Composites10.1016/j.matpr.2020.06.053 ↗
7. Advanced Aluminium Alloys for Aircraft and Aerospace Applications10.1016/0261-3069(88)90076-3 ↗
8. Optimization of Fiber Laser Welding Parameters for High Strength Aluminium Alloy AA7075-T610.1016/j.matpr.2021.08.276 ↗
9. Heat Transfer and Melt Flow of Keyhole, Transition and Conduction Modes in Laser Beam Oscillating Welding10.1016/j.ijheatmasstransfer.2022.123821 ↗
10. Spatial and Directional Characterization of Wire and arc Additive Manufactured Aluminum Alloy Using Phased Array Ultrasonic Backscattering Method10.1016/j.ultras.2023.107024 ↗
11. Investigation of Residual Stress Distribution of Dissimilar Al-7075-T6 and Al-6061-T6 in the Friction Stir Welding Process Strengthened with SiO2 Nanoparticles10.1016/j.jmapro.2019.05.023 ↗
12. An Experimental Study and Parameter Optimization of FSW for Welding Dissimilar 6061 and 7075 Al Alloys10.1007/s12008-022-00913-1 ↗
13. Composite Structure Modeling and Analysis of Advanced Aircraft Fuselage Concepts
14. Lightweight Chassis Components—The Development of a Hybrid Automotive Control Arm From Design to Manufacture10.1007/s12239-021-0109-0 ↗
15. A Review on Ultimate Strength of Aluminium Structural Elements and Systems for Marine Applications10.1016/j.oceaneng.2021.109153 ↗
16. Structural Analysis and Optimization of Bicycle Frame Designs10.1177/1687814017739513 ↗
17. Influence of Target Dynamics and Number of Impacts on Ballistic Performance of 6061-T6 and 7075-T6 Aluminum Alloy Targets10.1080/15397734.2020.1738245 ↗
18. Friction Stir Welding of Dissimilar Aluminum Alloy Combinations: State-of-the-Art10.3390/met9030270 ↗
19. Investigation on Feasibility of Dissimilar Welding of AA2124 and AA7075 Aluminium Alloy Using Tungsten Inert Gas Welding10.1016/j.matpr.2020.02.494 ↗
20. Progress in Joining of Advanced Materials10.1179/imr.1998.43.1.1 ↗
21. Laser Techniques for Dissimilar Joining of Aluminum Alloys to Steels: A Critical Review10.1016/j.jmatprotec.2021.117443 ↗
22. Application of Modern Aluminum Alloys to Aircraft10.1016/0376-0421(95)00004-6 ↗
23. State-of-the-Art of Advanced Gas Metal Arc Welding Processes: Dissimilar Metal Welding10.1177/0954405414538630 ↗
24. Studies on the Quality of Joints and Phenomena Therein for Welded Automotive Components Made of Aluminum Alloy—A Review10.3390/coatings14050601 ↗
25. Comparative in Mechanical Behavior of 6061 Aluminum Alloy Welded by Pulsed GMAW With Different Filler Metals and Heat Treatments10.3390/ma12244157 ↗
26. Influence of Arc Mode on the Microstructure and Mechanical Properties of 5356 Aluminum Alloy Fabricated by Wire Arc Additive Manufacturing10.1016/j.jmrt.2022.08.005 ↗
27. Post In-Situ Reaction Ultrasonic Treatment for Generation of Al–4.4 Cu/TiB2 Nanocomposite: A Route to Enhance the Strength of Metal Matrix Nanocomposites10.1016/j.jallcom.2016.05.067 ↗
28. Optimization of GTAW Al 3003 Weld Using Fabricated Nanocomposite Filler Metal10.1080/10426914.2018.1532585 ↗
29. Effect of Al-B4C Nanocomposite Filler Manufactured by Accumulative Roll Bonding (ARB) Method on the Microstructure and Mechanical Properties of Weldings Prepared by Tungsten Inert gas Welding10.1088/2053-1591/ab33a0 ↗
30. TIG Welding of Dissimilar High-Strength Aluminum Alloys 6061 and 7075 With Nano-Treated Filler Wires
31. A Brief Review on Effect of Nano Fillers on Performance of Composites10.1088/1757-899X/1059/1/012006 ↗
32. Review on Nanocomposites Based on Aerospace Applications10.1515/ntrev-2021-0018 ↗
33. Applying the Ultrasonic Vibration During TIG Welding as a Promising Approach for the Development of Nanoparticle Dispersion Strengthened Aluminum Weldments10.1016/j.jmatprotec.2020.116672 ↗
34. Optimization of Ultrasonic-Assisted TIG (UA-TIG) Welding Process Parameters for AA7075 Alloy Joints Using RSM-GA Approach10.1520/JTE20220445 ↗
35. Grain Refining by Ultrasonic Stirring of the Weld Pool10.1016/j.actamat.2016.01.016 ↗
36. Grain Refining of Ti-6Al-4V Alloy Fabricated by Laser and Wire Additive Manufacturing Assisted With Ultrasonic Vibration10.1016/j.ultsonch.2021.105472 ↗
37. Application of Ultrasonic Vibrations in Welding and Metal Processing: A Status Review10.1016/j.jmapro.2017.02.027 ↗
38. Ultrasonic Effects on Gas Tungsten Arc Based Wire Additive Manufacturing of Aluminum Matrix Nanocomposite10.1016/j.matdes.2022.110393 ↗
39. Optimization of Fused Deposition Modeling Process Parameters: A Review of Current Research and Future Prospects10.1007/s40436-014-0097-7 ↗
40. Process Parameter Optimization of Ultrasonic Assisted TIG Welding of Al 7075 and Al 6061Alloy Joints
41. Effect of Friction Coefficient in Friction Stir Welding of B4C Reinforced AA5083 Metal Matrix Composites and Use of Fuzzy Clustering Technique for Weld Strength Prediction10.1155/2024/9880686 ↗
42. Ultrasonic-Assisted Tungsten Inert Gas Welding of Inconel 625 Joints to Reduce Hot Cracking and Improve Microhardness: Optimization and Prediction Methods10.1520/JTE20230639 ↗
43. Metaheuristic Based Parametric Optimization of TIG Welded Joint10.1007/s12666-018-1330-z ↗
44. Optimization by RSM on Rotary Friction Welding of AA1100 Aluminum Alloy and Mild Steel10.1556/1848.2020.00005 ↗
45. An Experimental Analysis and Optimization of Process Parameters of AA6061 and AA7075 Welded Joint by TIG+ FSP Welding Using RSM10.1080/2374068X.2020.1829952 ↗
46. Optimization of Activated TIG Welding Parameters for Improving Weld Joint Strength of AISI 4135 PM Steel by Genetic Algorithm and Simulated Annealing10.1007/s00170-015-7599-8 ↗
47. Aluminum-Based Cast In Situ Composites: A Review10.1007/s11665-015-1424-2 ↗