journal article·2019-07-01

Experimental Characterization and Finite Element Prediction of Large Strain Spring-Back Behavior of Poly(Methyl Methacrylate)

D. Mathiesen, A. Kakumani, R. B. Dupaix

Publisher page

Abstract

Abstract Spring-back of poly(methyl methacrylate) (PMMA) at large strains, various embossing temperatures, and release temperatures below glass transition is quantified through modified unconfined recovery tests. Cooling, as well as large strains, is shown to reduce the amount of spring-back. Despite reducing the amount of spring-back, these experiments show that there is still a substantial amount present that needs to be accounted for in hot embossing processes. Spring-back is predicted using finite element simulations utilizing a constitutive model for the large strain stress relaxation behavior of PMMA. The model's temperature dependence is modified to account for cooling and focuses on the glass transition temperature region. Spring-back is predicted with this model, capturing the temperature and held strain dependence. Temperature assignment of the sample is found to have the largest effect on simulation accuracy. Interestingly, despite large thermal gradients in the PMMA, a uniform temperature approximation still yields reasonably accurate spring-back predictions. These experiments and simulations fill a substantial gap in knowledge of large strain recovery of PMMA under conditions normally found in hot embossing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanofabrication and Lithography Techniques · Force Microscopy Techniques and Applications · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering,The Ohio State University,W185 Scott Laboratory,201 West 19th Avenue,Columbus, OH 43210e-mail: mathiesen.2@osu.edu

Department of Mechanical and Aerospace Engineering,The Ohio State University,W185 Scott Laboratory,201 West 19th Avenue,Columbus, OH 43210e-mail: kakumani.1@osu.edu

Department of Mechanical and Aerospace Engineering,The Ohio State University,E310 Scott Laboratory,201 West 19th Avenue,Columbus, OH 43210e-mail: dupaix.1@osu.edu

Funding

Directorate for Engineering

References (27)

Show source-provided references
1. The Effect of Polymethylmethacrylate, Silicone, and Polyacrylic Intraocular Lenses on Posterior Capsular Opacification 3 Years After Cataract Surgery10.1016/S0161-6420(99)90047-7 ↗
2. Micromolding of Biochip Devices Designed With Microchannels10.1016/j.sna.2006.02.029 ↗
3. Embossing of High-Aspect-Ratio-Microstructures Using Sacrificial Templates and Fast Surface Heating10.1002/pen.20763 ↗
4. Hot Embossing of Pyramidal Micro-Structures in PMMA for Cell Culture10.1002/pssa.200880476 ↗
5. Large Strain Mechanical Behavior of Poly(Methyl Methacrylate) (PMMA) Near the Glass Transition Temperature10.1115/1.2345447 ↗
6. Material Characterization and Continuum Modeling of Poly(Methyl Methacrylate) (PMMA) Above the Glass Transition
7. Effects of Strain Rate, Temperature and Thermomechanical Coupling on the Finite Strain Deformation of Glassy Polymers10.1016/0167-6636(94)00034-E ↗
8. A Thermo-Mechanically Coupled Theory for Large Deformations of Amorphous Polymers. Part II: Applications10.1016/j.ijplas.2008.11.005 ↗
9. A Constitutive Model for the Nonlinear Viscoelastic Viscoplastic Behavior of Glassy Polymers10.1002/pen.760350407 ↗
10. Hot-Drawing of Poly(Methyl Methacrylate) and Simulation Using a Glass-Rubber Constitutive Model10.1016/S0032-3861(01)00799-6 ↗
11. Characterization and Constitutive Modeling of Stress-Relaxation Behavior of Poly(Methyl Methacrylate) (PMMA) Across the Glass Transition Temperature10.1016/j.mechmat.2014.01.003 ↗
12. Thermal Contraction and Volume Relaxation of Amorphous Polymers10.1007/BF01329190 ↗
13. Energy Storage During Inelastic Deformation of Glassy Polymers10.1016/0032-3861(93)90252-6 ↗
14. Components of Non-Elastic Deformation in Amorphous Glassy Polymers10.1007/BF00356465 ↗
15. A New Approach to the Description of Mechanical Behavior of Polymer Glasses10.1080/00914039508012119 ↗
16. A Thermoviscoelastic Model for Amorphous Shape Memory Polymers: Incorporating Structural and Stress Relaxation10.1016/j.jmps.2008.04.007 ↗
17. A Thermo-Mechanically-Coupled Large-Deformation Theory for Amorphous Polymers in a Temperature Range Which Spans Their Glass Transition10.1016/j.ijplas.2010.01.004 ↗
18. Constitutive Modeling of the Finite Strain Behavior of Amorphous Polymers in and Above the Glass Transition10.1016/j.mechmat.2006.02.006 ↗
19. The Onset of Nonlinear Viscoelasticity in Multiaxial Creep of Glassy Polymers: A Constitutive Model and Its Application to PMMA10.1002/pen.10256 ↗
20. On Modeling the Micro-Indentation Response of an Amorphous Polymer10.1016/j.ijplas.2005.07.006 ↗
21. Large Inelastic Deformation of Glassy Polymers. Part I: Rate Dependent Constitutive Model10.1016/0167-6636(88)90003-8 ↗
22. A Three-Dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials10.1016/0022-5096(93)90013-6 ↗
23. Evolution of Plastic Anisotropy in Amorphous Polymers During Finite Straining10.1016/0749-6419(93)90034-N ↗
24. Microscopic Theory of Linear, Entangled Polymer Chains Under Rapid Deformation Including Chain Stretch and Convective Constraint Release10.1122/1.1595099 ↗
25. Simple Constitutive Equation for Linear Polymer Melts Derived From Molecular Theory: Rolie-Poly Equation10.1016/S0377-0257(03)00114-9 ↗
26. Large Deformations in Oriented Polymer Glasses: Experimental Study and a New Glass-Melt Constitutive Model10.1002/polb.22028 ↗
27. Finite Element Modeling of Polymer Hot Embossing Using a Glass-Rubber Finite Strain Constitutive Model10.1002/pen.21323 ↗